File: | dev/pci/bktr/bktr_card.c |
Warning: | line 780, column 28 Although the value stored to 'card' is used in the enclosing expression, the value is never actually read from 'card' |
Press '?' to see keyboard shortcuts
Keyboard shortcuts:
1 | /* $OpenBSD: bktr_card.c,v 1.16 2022/02/21 12:18:54 jsg Exp $ */ |
2 | /* $FreeBSD: src/sys/dev/bktr/bktr_card.c,v 1.16 2000/10/31 13:09:56 roger Exp $ */ |
3 | |
4 | /* |
5 | * This is part of the Driver for Video Capture Cards (Frame grabbers) |
6 | * and TV Tuner cards using the Brooktree Bt848, Bt848A, Bt849A, Bt878, Bt879 |
7 | * chipset. |
8 | * Copyright Roger Hardiman and Amancio Hasty. |
9 | * |
10 | * bktr_card : This deals with identifying TV cards. |
11 | * trying to find the card make and model of card. |
12 | * trying to find the type of tuner fitted. |
13 | * reading the configuration EEPROM. |
14 | * locating i2c devices. |
15 | * |
16 | */ |
17 | |
18 | /* |
19 | * 1. Redistributions of source code must retain the |
20 | * Copyright (c) 1997 Amancio Hasty, 1999 Roger Hardiman |
21 | * All rights reserved. |
22 | * |
23 | * Redistribution and use in source and binary forms, with or without |
24 | * modification, are permitted provided that the following conditions |
25 | * are met: |
26 | * 1. Redistributions of source code must retain the above copyright |
27 | * notice, this list of conditions and the following disclaimer. |
28 | * 2. Redistributions in binary form must reproduce the above copyright |
29 | * notice, this list of conditions and the following disclaimer in the |
30 | * documentation and/or other materials provided with the distribution. |
31 | * 3. All advertising materials mentioning features or use of this software |
32 | * must display the following acknowledgement: |
33 | * This product includes software developed by Amancio Hasty and |
34 | * Roger Hardiman |
35 | * 4. The name of the author may not be used to endorse or promote products |
36 | * derived from this software without specific prior written permission. |
37 | * |
38 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
39 | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
40 | * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
41 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, |
42 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
43 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
44 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
45 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
46 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
47 | * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
48 | * POSSIBILITY OF SUCH DAMAGE. |
49 | */ |
50 | |
51 | #include <sys/param.h> |
52 | #include <sys/systm.h> |
53 | #include <sys/vnode.h> |
54 | |
55 | #include <dev/ic/bt8xx.h> /* OpenBSD location for .h files */ |
56 | #include <dev/pci/bktr/bktr_reg.h> |
57 | #include <dev/pci/bktr/bktr_core.h> |
58 | #include <dev/pci/bktr/bktr_tuner.h> |
59 | #include <dev/pci/bktr/bktr_card.h> |
60 | #include <dev/pci/bktr/bktr_audio.h> |
61 | |
62 | /* Include the PCI Vendor definitions */ |
63 | #include <dev/pci/pcidevs.h> |
64 | #include <dev/pci/pcireg.h> |
65 | |
66 | /* Various defines */ |
67 | #define HAUP_REMOTE_INT_WADDR0x30 0x30 |
68 | #define HAUP_REMOTE_INT_RADDR0x31 0x31 |
69 | |
70 | #define HAUP_REMOTE_EXT_WADDR0x34 0x34 |
71 | #define HAUP_REMOTE_EXT_RADDR0x35 0x35 |
72 | |
73 | /* address of BTSC/SAP decoder chip */ |
74 | #define TDA9850_WADDR0xb6 0xb6 |
75 | #define TDA9850_RADDR0xb7 0xb7 |
76 | |
77 | /* address of MSP3400C chip */ |
78 | #define MSP3400C_WADDR0x80 0x80 |
79 | #define MSP3400C_RADDR0x81 0x81 |
80 | |
81 | /* address of DPL3518A chip */ |
82 | #define DPL3518A_WADDR0x84 0x84 |
83 | #define DPL3518A_RADDR0x85 0x85 |
84 | |
85 | /* EEProm (128 * 8) on an STB card */ |
86 | #define X24C01_WADDR0xae 0xae |
87 | #define X24C01_RADDR0xaf 0xaf |
88 | |
89 | /* EEProm (256 * 8) on a Hauppauge card */ |
90 | /* and on most BT878s cards to store the sub-system vendor id */ |
91 | #define PFC8582_WADDR0xa0 0xa0 |
92 | #define PFC8582_RADDR0xa1 0xa1 |
93 | |
94 | #if BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL0x00000200 |
95 | #define DEFAULT_TUNER4 PHILIPS_PALI8 |
96 | #else |
97 | #define DEFAULT_TUNER4 PHILIPS_NTSC4 |
98 | #endif |
99 | |
100 | |
101 | |
102 | |
103 | /* |
104 | * the data for each type of card |
105 | * |
106 | * Note: |
107 | * these entries MUST be kept in the order defined by the CARD_XXX defines! |
108 | */ |
109 | static const struct CARDTYPE cards[] = { |
110 | |
111 | { CARD_UNKNOWN0, /* the card id */ |
112 | "Unknown", /* the 'name' */ |
113 | NULL((void *)0), /* the tuner */ |
114 | 0, /* the tuner i2c address */ |
115 | 0, /* dbx unknown */ |
116 | 0, |
117 | 0, |
118 | 0, /* EEProm unknown */ |
119 | 0, /* EEProm unknown */ |
120 | { 0, 0, 0, 0, 0 }, |
121 | 0 }, /* GPIO mask */ |
122 | |
123 | { CARD_MIRO1, /* the card id */ |
124 | "Pinnacle/Miro TV", /* the 'name' */ |
125 | NULL((void *)0), /* the tuner */ |
126 | 0, /* the tuner i2c address */ |
127 | 0, /* dbx unknown */ |
128 | 0, |
129 | 0, |
130 | 0, /* EEProm unknown */ |
131 | 0, /* size unknown */ |
132 | { 0x02, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */ |
133 | 0x0f }, /* GPIO mask */ |
134 | |
135 | { CARD_HAUPPAUGE2, /* the card id */ |
136 | "Hauppauge WinCast/TV", /* the 'name' */ |
137 | NULL((void *)0), /* the tuner */ |
138 | 0, /* the tuner i2c address */ |
139 | 0, /* dbx is optional */ |
140 | 0, |
141 | 0, |
142 | PFC8582_WADDR0xa0, /* EEProm type */ |
143 | (u_char)(256 / EEPROMBLOCKSIZE32), /* 256 bytes */ |
144 | { 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */ |
145 | 0x0f }, /* GPIO mask */ |
146 | |
147 | { CARD_STB3, /* the card id */ |
148 | "STB TV/PCI", /* the 'name' */ |
149 | NULL((void *)0), /* the tuner */ |
150 | 0, /* the tuner i2c address */ |
151 | 0, /* dbx is optional */ |
152 | 0, |
153 | 0, |
154 | X24C01_WADDR0xae, /* EEProm type */ |
155 | (u_char)(128 / EEPROMBLOCKSIZE32), /* 128 bytes */ |
156 | { 0x00, 0x01, 0x02, 0x02, 1 }, /* audio MUX values */ |
157 | 0x0f }, /* GPIO mask */ |
158 | |
159 | { CARD_INTEL4, /* the card id */ |
160 | "Intel Smart Video III/VideoLogic Captivator PCI", /* the 'name' */ |
161 | NULL((void *)0), /* the tuner */ |
162 | 0, /* the tuner i2c address */ |
163 | 0, |
164 | 0, |
165 | 0, |
166 | 0, |
167 | 0, |
168 | { 0, 0, 0, 0, 0 }, /* audio MUX values */ |
169 | 0x00 }, /* GPIO mask */ |
170 | |
171 | { CARD_IMS_TURBO5, /* the card id */ |
172 | "IMS TV Turbo", /* the 'name' */ |
173 | NULL((void *)0), /* the tuner */ |
174 | 0, /* the tuner i2c address */ |
175 | 0, /* dbx is optional */ |
176 | 0, |
177 | 0, |
178 | PFC8582_WADDR0xa0, /* EEProm type */ |
179 | (u_char)(256 / EEPROMBLOCKSIZE32), /* 256 bytes */ |
180 | { 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */ |
181 | 0x0f }, /* GPIO mask */ |
182 | |
183 | { CARD_AVER_MEDIA6, /* the card id */ |
184 | "AVer Media TV/FM", /* the 'name' */ |
185 | NULL((void *)0), /* the tuner */ |
186 | 0, /* the tuner i2c address */ |
187 | 0, /* dbx is optional */ |
188 | 0, |
189 | 0, |
190 | 0, /* EEProm type */ |
191 | 0, /* EEProm size */ |
192 | { 0x0c, 0x08, 0x04, 0x00, 1 }, /* audio MUX values */ |
193 | 0x1f }, /* GPIO mask */ |
194 | |
195 | { CARD_OSPREY7, /* the card id */ |
196 | "MMAC Osprey", /* the 'name' */ |
197 | NULL((void *)0), /* the tuner */ |
198 | 0, /* the tuner i2c address */ |
199 | 0, /* dbx is optional */ |
200 | 0, |
201 | 0, |
202 | PFC8582_WADDR0xa0, /* EEProm type */ |
203 | (u_char)(256 / EEPROMBLOCKSIZE32), /* 256 bytes */ |
204 | { 0x00, 0x00, 0x00, 0x00, 0 }, /* audio MUX values */ |
205 | 0 }, /* GPIO mask */ |
206 | |
207 | { CARD_NEC_PK8, /* the card id */ |
208 | "NEC PK-UG-X017", /* the 'name' */ |
209 | NULL((void *)0), /* the tuner */ |
210 | 0, /* the tuner i2c address */ |
211 | 0, /* dbx is optional */ |
212 | 0, |
213 | 0, |
214 | 0, /* EEProm type */ |
215 | 0, /* EEProm size */ |
216 | { 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */ |
217 | 0x0f }, /* GPIO mask */ |
218 | |
219 | { CARD_IO_GV9, /* the card id */ |
220 | "I/O DATA GV-BCTV2/PCI", /* the 'name' */ |
221 | NULL((void *)0), /* the tuner */ |
222 | 0, /* the tuner i2c address */ |
223 | 0, /* dbx is optional */ |
224 | 0, |
225 | 0, |
226 | 0, /* EEProm type */ |
227 | 0, /* EEProm size */ |
228 | { 0x00, 0x00, 0x00, 0x00, 1 }, /* Has special MUX handler */ |
229 | 0x0f }, /* GPIO mask */ |
230 | |
231 | { CARD_FLYVIDEO10, /* the card id */ |
232 | "FlyVideo", /* the 'name' */ |
233 | NULL((void *)0), /* the tuner */ |
234 | 0, /* the tuner i2c address */ |
235 | 0, /* dbx is optional */ |
236 | 0, /* msp34xx is optional */ |
237 | 0, /* dpl3518a is optional */ |
238 | 0xac, /* EEProm type */ |
239 | (u_char)(256 / EEPROMBLOCKSIZE32), /* 256 bytes */ |
240 | { 0x000, 0x800, 0x400, 0x8dff00, 1 },/* audio MUX values */ |
241 | 0x8dff00 }, /* GPIO mask */ |
242 | |
243 | { CARD_ZOLTRIX11, /* the card id */ |
244 | "Zoltrix", /* the 'name' */ |
245 | NULL((void *)0), /* the tuner */ |
246 | 0, /* the tuner i2c address */ |
247 | 0, /* dbx is optional */ |
248 | 0, /* msp34xx is optional */ |
249 | 0, /* dpl3518a is optional */ |
250 | 0, /* EEProm type */ |
251 | 0, /* EEProm size */ |
252 | { 0x04, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */ |
253 | 0x0f }, /* GPIO mask */ |
254 | |
255 | { CARD_KISS12, /* the card id */ |
256 | "KISS TV/FM PCI", /* the 'name' */ |
257 | NULL((void *)0), /* the tuner */ |
258 | 0, /* the tuner i2c address */ |
259 | 0, /* dbx is optional */ |
260 | 0, /* msp34xx is optional */ |
261 | 0, /* dpl3518a is optional */ |
262 | 0, /* EEProm type */ |
263 | 0, /* EEProm size */ |
264 | { 0x0c, 0x00, 0x0b, 0x0b, 1 }, /* audio MUX values */ |
265 | 0x0f }, /* GPIO mask */ |
266 | |
267 | { CARD_VIDEO_HIGHWAY_XTREME13, /* the card id */ |
268 | "Video Highway Xtreme", /* the 'name' */ |
269 | NULL((void *)0), /* the tuner */ |
270 | 0, |
271 | 0, |
272 | 0, |
273 | 0, |
274 | 0, /* EEProm type */ |
275 | 0, /* EEProm size */ |
276 | { 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */ |
277 | 0x0f }, /* GPIO mask */ |
278 | |
279 | { CARD_ASKEY_DYNALINK_MAGIC_TVIEW14, /* the card id */ |
280 | "Askey/Dynalink Magic TView", /* the 'name' */ |
281 | NULL((void *)0), /* the tuner */ |
282 | 0, |
283 | 0, |
284 | 0, |
285 | 0, |
286 | 0, /* EEProm type */ |
287 | 0, /* EEProm size */ |
288 | { 0x400, 0xE00, 0x400, 0xC00, 1 }, /* audio MUX values */ |
289 | 0xE00 }, /* GPIO mask */ |
290 | |
291 | { CARD_LEADTEK15, /* the card id */ |
292 | "Leadtek WinFast TV 2000", /* the 'name' */ |
293 | NULL((void *)0), /* the tuner */ |
294 | 0, |
295 | 0, |
296 | 0, |
297 | 0, |
298 | 0, /* EEProm type */ |
299 | 0, /* EEProm size */ |
300 | /* Tuner, Extern, Intern, Mute, Enabled */ |
301 | { 0x621000, 0x621000, 0x621000, 0xE21000, 1 }, /* audio MUX values */ |
302 | 0xfff000 }, /* GPIO mask */ |
303 | |
304 | { CARD_TERRATVPLUS16, /* the card id */ |
305 | "TerraTVplus", /* the 'name' */ |
306 | NULL((void *)0), /* the tuner */ |
307 | 0, |
308 | 0, |
309 | 0, |
310 | 0, |
311 | 0, /* EEProm type */ |
312 | 0, /* EEProm size */ |
313 | { 0x20000, 0x00000, 0x30000, 0x40000, 1 }, /* audio MUX values*/ |
314 | 0x70000 }, /* GPIO mask */ |
315 | |
316 | { CARD_TVWONDER17, /* the card id */ |
317 | "ATI TV-Wonder/VE", /* the 'name' */ |
318 | NULL((void *)0), /* the tuner */ |
319 | 0, |
320 | 0, |
321 | 0, |
322 | 0, |
323 | 0, /* EEProm type */ |
324 | 0, /* EEProm size */ |
325 | { 0x1002, 0x1002, 0x3003, 0x3003, 0x3003 }, /* audio MUX values*/ |
326 | 0x300f }, /* GPIO mask */ |
327 | |
328 | { CARD_IO_BCTV318, /* the card id */ |
329 | "I/O DATA GV-BCTV3/PCI", /* the 'name' */ |
330 | NULL((void *)0), /* the tuner */ |
331 | 0, /* the tuner i2c address */ |
332 | 0, /* dbx is optional */ |
333 | 0, |
334 | 0, |
335 | 0, /* EEProm type */ |
336 | 0, /* EEProm size */ |
337 | /* Tuner, Extern, Intern, Mute, Enabled */ |
338 | { 0x10000, 0, 0x10000, 0, 1 }, /* audio MUX values */ |
339 | 0x10f00 }, /* GPIO mask */ |
340 | |
341 | { CARD_AOPEN_VA100019, /* the card id */ |
342 | "AOpen VA1000", /* the 'name' */ |
343 | NULL((void *)0), /* the tuner */ |
344 | 0, /* the tuner i2c address */ |
345 | 0, /* dbx is optional */ |
346 | 0, |
347 | 0, |
348 | 0, /* EEProm unknown */ |
349 | 0, /* size unknown */ |
350 | { 0x02, 0x00, 0x00, 0x00, 1 }, /* audio MUX values */ |
351 | 0x18e0 }, /* GPIO mask */ |
352 | |
353 | { CARD_ZOLTRIX_GENIE_FM20, /* the card id */ |
354 | "Zoltrix Genie TV/FM", /* the 'name' */ |
355 | NULL((void *)0), /* the tuner */ |
356 | 0, /* the tuner i2c address */ |
357 | 0, /* dbx is optional */ |
358 | 0, /* msp34xx is optional */ |
359 | 0, /* dpl3518a is optional */ |
360 | 0, /* EEProm type */ |
361 | 0, /* EEProm size */ |
362 | { 0xbc803f, 0xbcb03f, 0xbc903f, 0x0, 1 }, /* audio MUX values*/ |
363 | 0xbcf03f }, /* GPIO mask */ |
364 | |
365 | { CARD_LEADTEK_XP21, /* the card id */ |
366 | "Leadtek WinFast TV 2000 XP", /* the 'name' */ |
367 | NULL((void *)0), /* the tuner */ |
368 | 0, /* the tuner i2c address */ |
369 | 0, /* dbx is optional */ |
370 | 0, /* msp34xx is optional */ |
371 | 0, /* dpl3518a is optional */ |
372 | 0, /* EEProm type */ |
373 | 0, /* EEProm size */ |
374 | { 0x122000, 0x1000, 0x620000, 0x0, 1 }, /* audio MUX values*/ |
375 | 0xb3300 }, /* GPIO mask */ |
376 | }; |
377 | |
378 | struct bt848_card_sig bt848_card_signature[1]= { |
379 | /* IMS TURBO TV : card 5 */ |
380 | { 5,9, {00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 02, 00, 00, 00}} |
381 | }; |
382 | |
383 | |
384 | /* |
385 | * Write to the configuration EEPROM on the card. |
386 | * This is dangerous and will mess up your card. Therefore it is not |
387 | * implemented. |
388 | */ |
389 | int |
390 | writeEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data ) |
391 | { |
392 | return( -1 ); |
393 | } |
394 | |
395 | /* |
396 | * Read the contents of the configuration EEPROM on the card. |
397 | * (This is not fitted to all makes of card. All Hauppauge cards have them |
398 | * and so do newer Bt878 based cards. |
399 | */ |
400 | int |
401 | readEEProm(bktr_ptr_t bktr, int offset, int count, u_char *data) |
402 | { |
403 | int x; |
404 | int addr; |
405 | int max; |
406 | int byte; |
407 | |
408 | /* get the address of the EEProm */ |
409 | addr = (int)(bktr->card.eepromAddr & 0xff); |
410 | if ( addr == 0 ) |
411 | return( -1 ); |
412 | |
413 | max = (int)(bktr->card.eepromSize * EEPROMBLOCKSIZE32); |
414 | if ( (offset + count) > max ) |
415 | return( -1 ); |
416 | |
417 | /* set the start address */ |
418 | if ( i2cWrite( bktr, addr, offset, -1 ) == -1 ) |
419 | return( -1 ); |
420 | |
421 | /* the read cycle */ |
422 | for ( x = 0; x < count; ++x ) { |
423 | if ( (byte = i2cRead( bktr, (addr | 1) )) == -1 ) |
424 | return( -1 ); |
425 | data[ x ] = byte; |
426 | } |
427 | |
428 | return( 0 ); |
429 | } |
430 | |
431 | |
432 | #define ABSENT (-1) |
433 | |
434 | /* |
435 | * get a signature of the card |
436 | * read all 128 possible i2c read addresses from 0x01 thru 0xff |
437 | * build a bit array with a 1 bit for each i2c device that responds |
438 | * |
439 | * XXX FIXME: use offset & count args |
440 | */ |
441 | int |
442 | signCard( bktr_ptr_t bktr, int offset, int count, u_char *sig ) |
443 | { |
444 | int x; |
445 | |
446 | for ( x = 0; x < 16; ++x ) |
447 | sig[ x ] = 0; |
448 | |
449 | for ( x = 0; x < count; ++x ) { |
450 | if ( i2cRead( bktr, (2 * x) + 1 ) != ABSENT ) { |
451 | sig[ x / 8 ] |= (1 << (x % 8) ); |
452 | } |
453 | } |
454 | |
455 | return( 0 ); |
456 | } |
457 | |
458 | |
459 | /* |
460 | * check_for_i2c_devices. |
461 | * Some BT848 cards have no tuner and no additional i2c devices |
462 | * eg stereo decoder. These are used for video conferencing or capture from |
463 | * a video camera. (eg VideoLogic Captivator PCI, Intel SmartCapture card). |
464 | * |
465 | * Determine if there are any i2c devices present. There are none present if |
466 | * a) reading from all 128 devices returns ABSENT (-1) for each one |
467 | * (eg VideoLogic Captivator PCI with BT848) |
468 | * b) reading from all 128 devices returns 0 for each one |
469 | * (eg VideoLogic Captivator PCI rev. 2F with BT848A) |
470 | */ |
471 | static int check_for_i2c_devices( bktr_ptr_t bktr ){ |
472 | int x, temp_read; |
473 | int i2c_all_0 = 1; |
474 | int i2c_all_absent = 1; |
475 | for ( x = 0; x < 128; ++x ) { |
476 | temp_read = i2cRead( bktr, (2 * x) + 1 ); |
477 | if (temp_read != 0) i2c_all_0 = 0; |
478 | if (temp_read != ABSENT) i2c_all_absent = 0; |
479 | } |
480 | |
481 | if ((i2c_all_0) || (i2c_all_absent)) return 0; |
482 | else return 1; |
483 | } |
484 | |
485 | |
486 | /* |
487 | * Temic/Philips datasheets say tuners can be at i2c addresses 0xc0, 0xc2, |
488 | * 0xc4 or 0xc6, settable by links on the tuner. |
489 | * Determine the actual address used on the TV card by probing read addresses. |
490 | */ |
491 | static int locate_tuner_address( bktr_ptr_t bktr) { |
492 | if (i2cRead( bktr, 0xc1) != ABSENT) return 0xc0; |
493 | if (i2cRead( bktr, 0xc3) != ABSENT) return 0xc2; |
494 | if (i2cRead( bktr, 0xc5) != ABSENT) return 0xc4; |
495 | if (i2cRead( bktr, 0xc7) != ABSENT) return 0xc6; |
496 | return -1; /* no tuner found */ |
497 | } |
498 | |
499 | |
500 | /* |
501 | * Search for a configuration EEPROM on the i2c bus by looking at i2c addresses |
502 | * where EEPROMs are usually found. |
503 | * On some cards, the EEPROM appears in several locations, but all in the |
504 | * range 0xa0 to 0xae. |
505 | */ |
506 | static int locate_eeprom_address( bktr_ptr_t bktr) { |
507 | if (i2cRead(bktr, 0xa0) != ABSENT) return 0xa0; |
508 | if (i2cRead(bktr, 0xac) != ABSENT) return 0xac; |
509 | if (i2cRead(bktr, 0xae) != ABSENT) return 0xae; |
510 | return -1; /* no eeprom found */ |
511 | } |
512 | |
513 | |
514 | /* |
515 | * determine the card brand/model |
516 | * BKTR_OVERRIDE_CARD, BKTR_OVERRIDE_TUNER, BKTR_OVERRIDE_DBX and |
517 | * BKTR_OVERRIDE_MSP can be used to select a specific device, |
518 | * regardless of the autodetection and i2c device checks. |
519 | * |
520 | * The scheme used for probing cards faces these problems: |
521 | * It is impossible to work out which type of tuner is actually fitted, |
522 | * (the driver cannot tell if the Tuner is PAL or NTSC, Temic or Philips) |
523 | * It is impossible to determine what audio-mux hardware is connected. |
524 | * It is impossible to determine if there is extra hardware connected to the |
525 | * GPIO pins (eg radio chips or MSP34xx reset logic) |
526 | * |
527 | * However some makes of card (eg Hauppauge) come with a configuration eeprom |
528 | * which tells us the make of the card. Most eeproms also tell us the |
529 | * tuner type and other features of the cards. |
530 | * |
531 | * The current probe code works as follows |
532 | * A) If the card uses a Bt878/879: |
533 | * 1) Read the sub-system vendor id from the configuration EEPROM. |
534 | * Select the required tuner, audio mux arrangement and any other |
535 | * onboard features. If this fails, move to step B. |
536 | * B) If it card uses a Bt848, 848A, 849A or an unknown Bt878/879: |
537 | * 1) Look for I2C devices. If there are none fitted, it is an Intel or |
538 | * VideoLogic cards. |
539 | * 2) Look for a configuration EEPROM. |
540 | * 2a) If there is one at I2C address 0xa0 it may be |
541 | * a Hauppauge or an Osprey. Check the EEPROM contents to determine which |
542 | * one it is. For Hauppauge, select the tuner type and audio hardware. |
543 | * 2b) If there is an EEPROM at I2C address 0xa8 it will be an STB card. |
544 | * We still have to guess on the tuner type. |
545 | * |
546 | * C) If we do not know the card type from (A) or (B), guess at the tuner |
547 | * type based on the I2C address of the tuner. |
548 | * |
549 | * D) After determining the Tuner Type, we probe the i2c bus for other |
550 | * devices at known locations, eg IR-Remote Control, MSP34xx and TDA |
551 | * stereo chips. |
552 | */ |
553 | |
554 | |
555 | /* |
556 | * These are the sub-system vendor ID codes stored in the |
557 | * configuration EEPROM used on Bt878/879 cards. They should match the |
558 | * number assigned to the company by the PCI Special Interest Group |
559 | */ |
560 | /* Following not confirmed with http://members.hyperlink.net.au/~chart, |
561 | so not added to OpenBSD's pcidevs */ |
562 | #define PCI_VENDOR_LEADTEK_ALT0x6606 0x6606 /* this is swapped w/ prod id */ |
563 | #define PCI_VENDOR_LEADTEK_ALT_20x6607 0x6607 |
564 | #define PCI_VENDOR_LEADTEK_ALT_30x107d 0x107d |
565 | #define PCI_VENDOR_FLYVIDEO0x1851 0x1851 |
566 | #define PCI_VENDOR_FLYVIDEO_20x1852 0x1852 |
567 | #define PCI_VENDOR_PINNACLE_ALT0xBD11 0xBD11 /* this is swapped w/ prod id */ |
568 | |
569 | void |
570 | probeCard( bktr_ptr_t bktr, int verbose, int unit ) |
571 | { |
572 | int card, i,j, card_found; |
573 | int status; |
574 | u_char probe_signature[128], *probe_temp; |
575 | int any_i2c_devices; |
576 | u_char eeprom[256]; |
577 | int tuner_i2c_address = -1; |
578 | int eeprom_i2c_address = -1; |
579 | |
580 | /* Select all GPIO bits as inputs */ |
581 | OUTL(bktr, BKTR_GPIO_OUT_EN, 0)do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x118 )), ((0)))); bus_space_barrier((bktr)->memt, (bktr)->memh , (0x118), 4, 0x02); } while (0); |
582 | if (bootverbose0) |
583 | printf("%s: GPIO is 0x%08x\n", bktr_name(bktr), |
584 | INL(bktr, BKTR_GPIO_DATA)(({ u_int32_t __v; __v = (((bktr)->memt)->read_4(((bktr )->memh), ((0x200)))); bus_space_barrier((bktr)->memt, ( bktr)->memh, (0x200), 4, 0x01); (__v); }))); |
585 | |
586 | #ifdef HAUPPAUGE_MSP_RESET |
587 | /* Reset the MSP34xx audio chip. This resolves bootup card |
588 | * detection problems with old Bt848 based Hauppauge cards with |
589 | * MSP34xx stereo audio chips. This must be user enabled because |
590 | * at this point the probe function does not know the card type. */ |
591 | OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x118 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x118)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x118), 4, 0x01); (__v); })) | (1<< 5))))); bus_space_barrier((bktr)->memt, (bktr)->memh, ( 0x118), 4, 0x02); } while (0); |
592 | OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x200 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x200)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x200), 4, 0x01); (__v); })) | (1<< 5))))); bus_space_barrier((bktr)->memt, (bktr)->memh, ( 0x200), 4, 0x02); } while (0); /* write '1' */ |
593 | DELAY(2500)(*delay_func)(2500); /* wait 2.5ms */ |
594 | OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x200 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x200)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x200), 4, 0x01); (__v); })) & ~( 1<<5))))); bus_space_barrier((bktr)->memt, (bktr)-> memh, (0x200), 4, 0x02); } while (0); /* write '0' */ |
595 | DELAY(2500)(*delay_func)(2500); /* wait 2.5ms */ |
596 | OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x200 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x200)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x200), 4, 0x01); (__v); })) | (1<< 5))))); bus_space_barrier((bktr)->memt, (bktr)->memh, ( 0x200), 4, 0x02); } while (0); /* write '1' */ |
597 | DELAY(2500)(*delay_func)(2500); /* wait 2.5ms */ |
598 | #endif |
599 | |
600 | /* Check for the presence of i2c devices */ |
601 | any_i2c_devices = check_for_i2c_devices( bktr ); |
602 | |
603 | |
604 | /* Check for a user specified override on the card selection */ |
605 | #if defined( BKTR_OVERRIDE_CARD ) |
606 | bktr->card = cards[ (card = BKTR_OVERRIDE_CARD) ]; |
607 | goto checkEEPROM; |
608 | #endif |
609 | if (bktr->bt848_card != -1 ) { |
610 | bktr->card = cards[ (card = bktr->bt848_card) ]; |
611 | goto checkEEPROM; |
612 | } |
613 | |
614 | |
615 | /* No override, so try and determine the make of the card */ |
616 | |
617 | /* On BT878/879 cards, read the sub-system vendor id */ |
618 | /* This identifies the manufacturer of the card and the model */ |
619 | /* In theory this can be read from PCI registers but this does not */ |
620 | /* appear to work on the FlyVideo 98. Hauppauge also warned that */ |
621 | /* the PCI registers are sometimes not loaded correctly. */ |
622 | /* Therefore, I will read the sub-system vendor ID from the EEPROM */ |
623 | /* (just like the Bt878 does during power up initialisation) */ |
624 | |
625 | if ((bktr->id==BROOKTREE_8784) || (bktr->id==BROOKTREE_8795)) { |
626 | /* Try and locate the EEPROM */ |
627 | eeprom_i2c_address = locate_eeprom_address( bktr ); |
628 | if (eeprom_i2c_address != -1) { |
629 | |
630 | unsigned int subsystem_vendor_id; /* vendors PCI-SIG ID */ |
631 | unsigned int subsystem_id; /* board model number */ |
632 | unsigned int byte_252, byte_253, byte_254, byte_255; |
633 | |
634 | bktr->card = cards[ (card = CARD_UNKNOWN0) ]; |
635 | bktr->card.eepromAddr = eeprom_i2c_address; |
636 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
637 | |
638 | if (readEEProm(bktr, 0, 256, eeprom) && bootverbose0) |
639 | printf("%s: error reading EEPROM\n", bktr_name(bktr)); |
640 | byte_252 = (unsigned int)eeprom[252]; |
641 | byte_253 = (unsigned int)eeprom[253]; |
642 | byte_254 = (unsigned int)eeprom[254]; |
643 | byte_255 = (unsigned int)eeprom[255]; |
644 | |
645 | subsystem_id = (byte_252 << 8) | byte_253; |
646 | subsystem_vendor_id = (byte_254 << 8) | byte_255; |
647 | |
648 | if (bootverbose0) |
649 | printf("%s: subsystem 0x%04x 0x%04x\n", bktr_name(bktr), |
650 | subsystem_vendor_id, subsystem_id); |
651 | |
652 | if (subsystem_vendor_id == PCI_VENDOR_AVERMEDIA0x1461) { |
653 | bktr->card = cards[ (card = CARD_AVER_MEDIA6) ]; |
654 | bktr->card.eepromAddr = eeprom_i2c_address; |
655 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
656 | goto checkTuner; |
657 | } |
658 | |
659 | if (subsystem_vendor_id == PCI_VENDOR_HAUPPAUGE0x0070) { |
660 | bktr->card = cards[ (card = CARD_HAUPPAUGE2) ]; |
661 | bktr->card.eepromAddr = eeprom_i2c_address; |
662 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
663 | goto checkTuner; |
664 | } |
665 | |
666 | if ((subsystem_vendor_id == PCI_VENDOR_FLYVIDEO0x1851) || |
667 | (subsystem_vendor_id == PCI_VENDOR_FLYVIDEO_20x1852) ) { |
668 | bktr->card = cards[ (card = CARD_FLYVIDEO10) ]; |
669 | bktr->card.eepromAddr = eeprom_i2c_address; |
670 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
671 | goto checkTuner; |
672 | } |
673 | |
674 | if (subsystem_vendor_id == PCI_VENDOR_STB0x10b4) { |
675 | bktr->card = cards[ (card = CARD_STB3) ]; |
676 | bktr->card.eepromAddr = eeprom_i2c_address; |
677 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
678 | goto checkTuner; |
679 | } |
680 | |
681 | if (subsystem_vendor_id == PCI_VENDOR_ASKEY0x144f) { |
682 | bktr->card = cards[ (card = CARD_ASKEY_DYNALINK_MAGIC_TVIEW14) ]; |
683 | bktr->card.eepromAddr = eeprom_i2c_address; |
684 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
685 | goto checkTuner; |
686 | } |
687 | |
688 | if ((subsystem_vendor_id == PCI_VENDOR_LEADTEK0x107d) |
689 | || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT0x6606) |
690 | || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_20x6607) |
691 | || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_30x107d)) { |
692 | if (subsystem_id == PCI_PRODUCT_LEADTEK_WINFAST_XP0x6609) |
693 | bktr->card = cards[ (card = CARD_LEADTEK_XP21) ]; |
694 | else |
695 | bktr->card = cards[ (card = CARD_LEADTEK15) ]; |
696 | bktr->card.eepromAddr = eeprom_i2c_address; |
697 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
698 | goto checkTuner; |
699 | } |
700 | |
701 | if (subsystem_vendor_id == PCI_VENDOR_PINNACLE_ALT0xBD11) { |
702 | bktr->card = cards[ (card = CARD_MIRO1) ]; |
703 | bktr->card.eepromAddr = eeprom_i2c_address; |
704 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
705 | goto checkTuner; |
706 | } |
707 | |
708 | if (subsystem_vendor_id == PCI_VENDOR_TERRATEC0x153b) { |
709 | bktr->card = cards[ (card = CARD_TERRATVPLUS16) ]; |
710 | bktr->card.eepromAddr = eeprom_i2c_address; |
711 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
712 | goto checkTuner; |
713 | } |
714 | |
715 | if (subsystem_vendor_id == PCI_VENDOR_ATI0x1002) { |
716 | bktr->card = cards[ (card = CARD_TVWONDER17) ]; |
717 | bktr->card.eepromAddr = eeprom_i2c_address; |
718 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
719 | goto checkTuner; |
720 | } |
721 | |
722 | /* |
723 | * Check which card as the GV-BCTV4 and GV-BCTV5 IODATA make |
724 | * are somewhat different to the GV-BCTV3. |
725 | */ |
726 | |
727 | if (subsystem_vendor_id == PCI_VENDOR_IODATA0x10fc && |
728 | subsystem_id == PCI_PRODUCT_IODATA_GV_BCTV30x4020) { |
729 | bktr->card = cards[ (card = CARD_IO_BCTV318) ]; |
730 | bktr->card.eepromAddr = eeprom_i2c_address; |
731 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
732 | goto checkTuner; |
733 | } |
734 | |
735 | if (subsystem_vendor_id == PCI_VENDOR_ZOLTRIX0x15b0) { |
736 | if (subsystem_id == PCI_PRODUCT_ZOLTRIX_GENIE_TV_FM0x400d) { |
737 | bktr->card = cards[ (card = CARD_ZOLTRIX_GENIE_FM20) ]; |
738 | } else { |
739 | bktr->card = cards[ (card = CARD_ZOLTRIX11) ]; |
740 | } |
741 | bktr->card.eepromAddr = eeprom_i2c_address; |
742 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
743 | goto checkTuner; |
744 | } |
745 | |
746 | /* Vendor is unknown. We will use the standard probe code */ |
747 | /* which may not give best results */ |
748 | printf("%s: Warning " |
749 | "- card vendor 0x%04x (model 0x%04x) unknown.\n", |
750 | bktr_name(bktr), subsystem_vendor_id, subsystem_id); |
751 | } else |
752 | printf("%s: Card has no configuration EEPROM. " |
753 | "Cannot determine card make.\n", bktr_name(bktr)); |
754 | } /* end of bt878/bt879 card detection code */ |
755 | |
756 | /* If we get to this point, we must have a Bt848/848A/849A card */ |
757 | /* or a Bt878/879 with an unknown subsystem vendor id */ |
758 | /* Try and determine the make of card by clever i2c probing */ |
759 | |
760 | /* Check for i2c devices. If none, move on */ |
761 | if (!any_i2c_devices) { |
762 | bktr->card = cards[ (card = CARD_INTEL4) ]; |
763 | bktr->card.eepromAddr = 0; |
764 | bktr->card.eepromSize = 0; |
765 | goto checkTuner; |
766 | } |
767 | |
768 | /* Look for Hauppauge, STB and Osprey cards by the presence */ |
769 | /* of an EEPROM */ |
770 | /* Note: Bt878 based cards also use EEPROMs so we can only do this */ |
771 | /* test on BT848/848A and 849A based cards. */ |
772 | if ((bktr->id==BROOKTREE_8481) || |
773 | (bktr->id==BROOKTREE_848A2) || |
774 | (bktr->id==BROOKTREE_849A3)) { |
775 | |
776 | /* At i2c address 0xa0, look for Hauppauge and Osprey cards */ |
777 | if ( (status = i2cRead( bktr, PFC8582_RADDR0xa1 )) != ABSENT ) { |
778 | |
779 | /* Read the eeprom contents */ |
780 | bktr->card = cards[ (card = CARD_UNKNOWN0) ]; |
Although the value stored to 'card' is used in the enclosing expression, the value is never actually read from 'card' | |
781 | bktr->card.eepromAddr = PFC8582_WADDR0xa0; |
782 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
783 | readEEProm(bktr, 0, 128, eeprom ); |
784 | |
785 | /* For Hauppauge, check the EEPROM begins with 0x84 */ |
786 | if (eeprom[0] == 0x84) { |
787 | bktr->card = cards[ (card = CARD_HAUPPAUGE2) ]; |
788 | bktr->card.eepromAddr = PFC8582_WADDR0xa0; |
789 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
790 | goto checkTuner; |
791 | } |
792 | |
793 | /* For Osprey, check the EEPROM begins with "MMAC" */ |
794 | if ( (eeprom[0] == 'M') &&(eeprom[1] == 'M') |
795 | &&(eeprom[2] == 'A') &&(eeprom[3] == 'C')) { |
796 | bktr->card = cards[ (card = CARD_OSPREY7) ]; |
797 | bktr->card.eepromAddr = PFC8582_WADDR0xa0; |
798 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
799 | goto checkTuner; |
800 | } |
801 | printf("%s: Warning: Unknown card type. EEPROM data not recognised\n", |
802 | bktr_name(bktr)); |
803 | printf("%s: %x %x %x %x\n", bktr_name(bktr), |
804 | eeprom[0],eeprom[1],eeprom[2],eeprom[3]); |
805 | } |
806 | |
807 | /* look for an STB card */ |
808 | if ( (status = i2cRead( bktr, X24C01_RADDR0xaf )) != ABSENT ) { |
809 | bktr->card = cards[ (card = CARD_STB3) ]; |
810 | bktr->card.eepromAddr = X24C01_WADDR0xae; |
811 | bktr->card.eepromSize = (u_char)(128 / EEPROMBLOCKSIZE32); |
812 | goto checkTuner; |
813 | } |
814 | |
815 | } |
816 | |
817 | signCard( bktr, 1, 128, (u_char *) &probe_signature ); |
818 | |
819 | if (bootverbose0) { |
820 | printf("%s: card signature: ", bktr_name(bktr)); |
821 | for (j = 0; j < Bt848_MAX_SIGN16; j++) { |
822 | printf(" %02x ", probe_signature[j]); |
823 | } |
824 | printf("\n\n"); |
825 | } |
826 | for (i = 0; |
827 | i < (sizeof bt848_card_signature)/ sizeof (struct bt848_card_sig); |
828 | i++ ) { |
829 | |
830 | card_found = 1; |
831 | probe_temp = (u_char *) &bt848_card_signature[i].signature; |
832 | |
833 | for (j = 0; j < Bt848_MAX_SIGN16; j++) { |
834 | if ((probe_temp[j] & 0xf) != (probe_signature[j] & 0xf)) { |
835 | card_found = 0; |
836 | break; |
837 | } |
838 | |
839 | } |
840 | if (card_found) { |
841 | bktr->card = cards[ card = bt848_card_signature[i].card]; |
842 | eeprom_i2c_address = locate_eeprom_address( bktr ); |
843 | if (eeprom_i2c_address != -1) { |
844 | bktr->card.eepromAddr = eeprom_i2c_address; |
845 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
846 | } else { |
847 | bktr->card.eepromAddr = 0; |
848 | bktr->card.eepromSize = 0; |
849 | } |
850 | tuner_i2c_address = locate_tuner_address( bktr ); |
851 | select_tuner( bktr, bt848_card_signature[i].tuner ); |
852 | goto checkDBX; |
853 | } |
854 | } |
855 | |
856 | /* We do not know the card type. Default to Miro */ |
857 | bktr->card = cards[ (card = CARD_MIRO1) ]; |
858 | |
859 | |
860 | checkEEPROM: |
861 | /* look for a configuration eeprom */ |
862 | eeprom_i2c_address = locate_eeprom_address( bktr ); |
863 | if (eeprom_i2c_address != -1) { |
864 | bktr->card.eepromAddr = eeprom_i2c_address; |
865 | bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE32); |
866 | } else { |
867 | bktr->card.eepromAddr = 0; |
868 | bktr->card.eepromSize = 0; |
869 | } |
870 | |
871 | |
872 | checkTuner: |
873 | |
874 | /* look for a tuner */ |
875 | tuner_i2c_address = locate_tuner_address( bktr ); |
876 | if ( tuner_i2c_address == -1 ) { |
877 | select_tuner( bktr, NO_TUNER0 ); |
878 | goto checkDBX; |
879 | } |
880 | |
881 | #if defined( BKTR_OVERRIDE_TUNER ) |
882 | select_tuner( bktr, BKTR_OVERRIDE_TUNER ); |
883 | goto checkDBX; |
884 | #endif |
885 | if (bktr->bt848_tuner != -1 ) { |
886 | select_tuner( bktr, bktr->bt848_tuner & 0xff ); |
887 | goto checkDBX; |
888 | } |
889 | |
890 | /* Check for i2c devices */ |
891 | if (!any_i2c_devices) { |
892 | select_tuner( bktr, NO_TUNER0 ); |
893 | goto checkDBX; |
894 | } |
895 | |
896 | /* differentiate type of tuner */ |
897 | |
898 | switch (card) { |
899 | case CARD_MIRO1: |
900 | switch (((INL(bktr, BKTR_GPIO_DATA)(({ u_int32_t __v; __v = (((bktr)->memt)->read_4(((bktr )->memh), ((0x200)))); bus_space_barrier((bktr)->memt, ( bktr)->memh, (0x200), 4, 0x01); (__v); })) >> 10)-1)&7) { |
901 | case 0: select_tuner( bktr, TEMIC_PAL2 ); break; |
902 | case 1: select_tuner( bktr, PHILIPS_PAL5 ); break; |
903 | case 2: select_tuner( bktr, PHILIPS_NTSC4 ); break; |
904 | case 3: select_tuner( bktr, PHILIPS_SECAM6 ); break; |
905 | case 4: select_tuner( bktr, NO_TUNER0 ); break; |
906 | case 5: select_tuner( bktr, PHILIPS_PALI8 ); break; |
907 | case 6: select_tuner( bktr, TEMIC_NTSC1 ); break; |
908 | case 7: select_tuner( bktr, TEMIC_PALI7 ); break; |
909 | } |
910 | goto checkDBX; |
911 | break; |
912 | |
913 | case CARD_HAUPPAUGE2: |
914 | /* Hauppauge kindly supplied the following Tuner Table */ |
915 | /* FIXME: I think the tuners the driver selects for types */ |
916 | /* 0x08 and 0x15 may be incorrect but no one has complained. */ |
917 | /* Old Temic tuners had their own API, but newer Temic tuners */ |
918 | /* have the same API as Philips tuners */ |
919 | /* |
920 | ID Tuner Model Format We select Format |
921 | 0x00 NONE |
922 | 0x01 EXTERNAL |
923 | 0x02 OTHER |
924 | 0x03 Philips FI1216 BG |
925 | 0x04 Philips FI1216MF BGLL' PHILIPS_SECAM |
926 | 0x05 Philips FI1236 MN PHILIPS_NTSC |
927 | 0x06 Philips FI1246 I PHILIPS_PALI |
928 | 0x07 Philips FI1256 DK |
929 | 0x08 Philips FI1216 MK2 BG PHILIPS_PALI |
930 | 0x09 Philips FI1216MF MK2 BGLL' PHILIPS_SECAM |
931 | 0x0a Philips FI1236 MK2 MN PHILIPS_NTSC |
932 | 0x0b Philips FI1246 MK2 I PHILIPS_PALI |
933 | 0x0c Philips FI1256 MK2 DK |
934 | 0x0d Temic 4032FY5 NTSC TEMIC_NTSC |
935 | 0x0e Temic 4002FH5 BG TEMIC_PAL |
936 | 0x0f Temic 4062FY5 I TEMIC_PALI |
937 | 0x10 Philips FR1216 MK2 BG |
938 | 0x11 Philips FR1216MF MK2 BGLL' PHILIPS_FR1236_SECAM |
939 | 0x12 Philips FR1236 MK2 MN PHILIPS_FR1236_NTSC |
940 | 0x13 Philips FR1246 MK2 I |
941 | 0x14 Philips FR1256 MK2 DK |
942 | 0x15 Philips FM1216 BG PHILIPS_FR1216_PAL |
943 | 0x16 Philips FM1216MF BGLL' PHILIPS_FR1236_SECAM |
944 | 0x17 Philips FM1236 MN PHILIPS_FR1236_NTSC |
945 | 0x18 Philips FM1246 I |
946 | 0x19 Philips FM1256 DK |
947 | 0x1a Temic 4036FY5 MN (FI1236 MK2 clone) PHILIPS_NTSC |
948 | 0x1b Samsung TCPN9082D MN |
949 | 0x1c Samsung TCPM9092P Pal BG/I/DK |
950 | 0x1d Temic 4006FH5 BG PHILIPS_PALI |
951 | 0x1e Samsung TCPN9085D MN/Radio |
952 | 0x1f Samsung TCPB9085P Pal BG/I/DK / Radio |
953 | 0x20 Samsung TCPL9091P Pal BG & Secam L/L' |
954 | 0x21 Temic 4039FY5 NTSC Radio |
955 | 0x22 Philips FQ1216ME Pal BGIDK & Secam L/L' |
956 | 0x23 Temic 4066FY5 Pal I (FI1246 MK2 clone) PHILIPS_PALI |
957 | 0x24 Philips TD1536 MN/ATSCDigital |
958 | 0x25 Philips TD1536D MN/ATSCDigital DUAL INPUT |
959 | 0x26 Philips FMR1236 M/N FM(no demod) |
960 | 0x27 Philips FI1256MP B/G, D/K |
961 | 0x28 Samsung TCPQ9091P BG/I/DK, L/L' |
962 | 0x29 Temic 4006FN5 BG/I/DK |
963 | 0x2a Temic 4009FR5 BG FM PHILIPS_FR1216_PAL |
964 | 0x2b Temic 4046FM5 B/G, I, D/K, L/L' |
965 | 0x2c Temic 4009FN5 B/G, I, D/K, FM (no demod) |
966 | 0x2d Philips TD1536D_FH_44 MN/ATSCDigital DUAL INPUT |
967 | */ |
968 | |
969 | |
970 | /* Determine the model number from the eeprom */ |
971 | if (bktr->card.eepromAddr != 0) { |
972 | /* eeprom data block structure */ |
973 | unsigned char *block_1, *block_2, *block_3, *block_4; |
974 | int block_1_data_size, block_2_data_size, block_3_data_size; |
975 | int block_1_total_size, block_2_total_size, block_3_total_size; |
976 | int block_4_header_size; |
977 | |
978 | unsigned int model,revision; |
979 | unsigned char tuner_code; |
980 | unsigned char no_audio_mux; |
981 | |
982 | readEEProm(bktr, 0, 128, eeprom); |
983 | |
984 | /* LOCATE THE EEPROM DATA BLOCKS */ |
985 | block_1 = &eeprom[0]; |
986 | block_1_data_size = (block_1[2] << 8 | block_1[1]); |
987 | block_1_total_size = block_1_data_size + 3; /* Header bytes */ |
988 | |
989 | block_2 = &eeprom[block_1_total_size]; |
990 | block_2_data_size = (block_2[2] << 8 | block_2[1]); |
991 | block_2_total_size = block_2_data_size + 3; /* Header bytes */ |
992 | |
993 | block_3 = &eeprom[block_1_total_size + block_2_total_size]; |
994 | block_3_data_size = (block_3[0] &0x07); |
995 | block_3_total_size = block_3_data_size + 1; /* Header size */ |
996 | |
997 | block_4 = &eeprom[block_1_total_size +block_2_total_size +block_3_total_size]; |
998 | block_4_header_size = 1; |
999 | |
1000 | model = (block_1[12] << 8 | block_1[11]); |
1001 | revision = (block_1[15] << 16 | block_1[14] << 8 | block_1[13]); |
1002 | |
1003 | tuner_code = block_1[9]; |
1004 | |
1005 | no_audio_mux = ((block_3[3] >> 7) &0x01); |
1006 | |
1007 | if (no_audio_mux) bktr->audio_mux_present = 0; |
1008 | |
1009 | if (verbose) |
1010 | printf("%s: Hauppauge Model %d %c%c%c%c\n", |
1011 | bktr_name(bktr), |
1012 | model, |
1013 | ((revision >> 18) & 0x3f) + 32, |
1014 | ((revision >> 12) & 0x3f) + 32, |
1015 | ((revision >> 6) & 0x3f) + 32, |
1016 | ((revision >> 0) & 0x3f) + 32 ); |
1017 | |
1018 | /* Determine the tuner type from the eeprom */ |
1019 | |
1020 | switch (tuner_code) { |
1021 | |
1022 | case 0x5: |
1023 | case 0x0a: |
1024 | case 0x1a: |
1025 | select_tuner( bktr, PHILIPS_NTSC4 ); |
1026 | goto checkDBX; |
1027 | |
1028 | case 0x4: |
1029 | case 0x9: |
1030 | select_tuner( bktr, PHILIPS_SECAM6 ); |
1031 | goto checkDBX; |
1032 | |
1033 | case 0x11: |
1034 | case 0x16: |
1035 | select_tuner( bktr, PHILIPS_FR1236_SECAM11 ); |
1036 | goto checkDBX; |
1037 | |
1038 | case 0x12: |
1039 | case 0x17: |
1040 | case 0x21: /* hauppage #191 wintv-fm -wsr 2003/1/13 */ |
1041 | select_tuner( bktr, PHILIPS_FR1236_NTSC9 ); |
1042 | goto checkDBX; |
1043 | |
1044 | case 0x6: |
1045 | case 0x8: |
1046 | case 0xb: |
1047 | case 0x1d: |
1048 | case 0x23: |
1049 | select_tuner( bktr, PHILIPS_PALI8 ); |
1050 | goto checkDBX; |
1051 | |
1052 | case 0xd: |
1053 | select_tuner( bktr, TEMIC_NTSC1 ); |
1054 | goto checkDBX; |
1055 | |
1056 | case 0xe: |
1057 | select_tuner( bktr, TEMIC_PAL2 ); |
1058 | goto checkDBX; |
1059 | |
1060 | case 0xf: |
1061 | select_tuner( bktr, TEMIC_PALI7 ); |
1062 | goto checkDBX; |
1063 | |
1064 | case 0x15: |
1065 | select_tuner( bktr, PHILIPS_FR1216_PAL10 ); |
1066 | goto checkDBX; |
1067 | |
1068 | case 0x2a: |
1069 | bktr->msp_use_mono_source = 1; |
1070 | select_tuner( bktr, PHILIPS_FR1216_PAL10 ); |
1071 | goto checkDBX; |
1072 | |
1073 | default : |
1074 | printf("%s: Warning - Unknown Hauppauge Tuner 0x%x\n", |
1075 | bktr_name(bktr), tuner_code); |
1076 | } |
1077 | } |
1078 | break; |
1079 | |
1080 | |
1081 | case CARD_AVER_MEDIA6: |
1082 | /* AVerMedia kindly supplied some details of their EEPROM contents |
1083 | * which allow us to auto select the Tuner Type. |
1084 | * Only the newer AVerMedia cards actually have an EEPROM. |
1085 | */ |
1086 | if (bktr->card.eepromAddr != 0) { |
1087 | |
1088 | u_char tuner_make; /* Eg Philips, Temic */ |
1089 | u_char tuner_tv_fm; /* TV or TV with FM Radio */ |
1090 | u_char tuner_format; /* Eg NTSC, PAL, SECAM */ |
1091 | int tuner; |
1092 | |
1093 | int tuner_0_table[] = { |
1094 | PHILIPS_NTSC4, PHILIPS_PAL5, |
1095 | PHILIPS_PAL5, PHILIPS_PAL5, |
1096 | PHILIPS_PAL5, PHILIPS_PAL5, |
1097 | PHILIPS_SECAM6, PHILIPS_SECAM6, |
1098 | PHILIPS_SECAM6, PHILIPS_PAL5}; |
1099 | |
1100 | int tuner_0_fm_table[] = { |
1101 | PHILIPS_FR1236_NTSC9, PHILIPS_FR1216_PAL10, |
1102 | PHILIPS_FR1216_PAL10, PHILIPS_FR1216_PAL10, |
1103 | PHILIPS_FR1216_PAL10, PHILIPS_FR1216_PAL10, |
1104 | PHILIPS_FR1236_SECAM11, PHILIPS_FR1236_SECAM11, |
1105 | PHILIPS_FR1236_SECAM11, PHILIPS_FR1216_PAL10}; |
1106 | |
1107 | int tuner_1_table[] = { |
1108 | TEMIC_NTSC1, TEMIC_PAL2, TEMIC_PAL2, |
1109 | TEMIC_PAL2, TEMIC_PAL2, TEMIC_PAL2, |
1110 | TEMIC_SECAM3, TEMIC_SECAM3, TEMIC_SECAM3, |
1111 | TEMIC_PAL2}; |
1112 | |
1113 | |
1114 | /* Extract information from the EEPROM data */ |
1115 | readEEProm(bktr, 0, 128, eeprom); |
1116 | |
1117 | tuner_make = (eeprom[0x41] & 0x7); |
1118 | tuner_tv_fm = (eeprom[0x41] & 0x18) >> 3; |
1119 | tuner_format = (eeprom[0x42] & 0xf0) >> 4; |
1120 | |
1121 | /* Treat tuner make 0 (Philips) and make 2 (LG) the same */ |
1122 | if ( ((tuner_make == 0) || (tuner_make == 2)) |
1123 | && (tuner_format <= 9) && (tuner_tv_fm == 0) ) { |
1124 | tuner = tuner_0_table[tuner_format]; |
1125 | select_tuner( bktr, tuner ); |
1126 | goto checkDBX; |
1127 | } |
1128 | |
1129 | if ( ((tuner_make == 0) || (tuner_make == 2)) |
1130 | && (tuner_format <= 9) && (tuner_tv_fm == 1) ) { |
1131 | tuner = tuner_0_fm_table[tuner_format]; |
1132 | select_tuner( bktr, tuner ); |
1133 | goto checkDBX; |
1134 | } |
1135 | |
1136 | if ( (tuner_make == 1) && (tuner_format <= 9) ) { |
1137 | tuner = tuner_1_table[tuner_format]; |
1138 | select_tuner( bktr, tuner ); |
1139 | goto checkDBX; |
1140 | } |
1141 | |
1142 | printf("%s: Warning - Unknown AVerMedia Tuner Make %d Format %d\n", |
1143 | bktr_name(bktr), tuner_make, tuner_format); |
1144 | } |
1145 | break; |
1146 | |
1147 | case CARD_LEADTEK15: |
1148 | #if BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL0x00000200 |
1149 | select_tuner( bktr, PHILIPS_FR1216_PAL10 ); |
1150 | #else |
1151 | select_tuner( bktr, PHILIPS_FR1236_NTSC9 ); |
1152 | #endif |
1153 | goto checkDBX; |
1154 | break; |
1155 | |
1156 | case CARD_TVWONDER17: |
1157 | select_tuner( bktr, PHILIPS_NTSC4 ); |
1158 | goto checkDBX; |
1159 | break; |
1160 | |
1161 | case CARD_ZOLTRIX_GENIE_FM20: |
1162 | select_tuner( bktr, PHILIPS_FR1236_NTSC9 ); |
1163 | goto checkDBX; |
1164 | break; |
1165 | |
1166 | case CARD_IO_BCTV318: |
1167 | select_tuner( bktr, ALPS_TSCH512 ); /* ALPS_TSCH6, in fact. */ |
1168 | goto checkDBX; |
1169 | break; |
1170 | |
1171 | case CARD_LEADTEK_XP21: |
1172 | select_tuner( bktr, TIVISION_TVF553314 ); |
1173 | goto checkDBX; |
1174 | break; |
1175 | |
1176 | } /* end switch(card) */ |
1177 | |
1178 | |
1179 | /* At this point, a goto checkDBX has not occurred */ |
1180 | /* We have not been able to select a Tuner */ |
1181 | /* Some cards make use of the tuner address to */ |
1182 | /* identify the make/model of tuner */ |
1183 | |
1184 | /* At address 0xc0/0xc1 we often find a TEMIC NTSC */ |
1185 | if ( i2cRead( bktr, 0xc1 ) != ABSENT ) { |
1186 | select_tuner( bktr, TEMIC_NTSC1 ); |
1187 | goto checkDBX; |
1188 | } |
1189 | |
1190 | /* At address 0xc6/0xc7 we often find a PHILIPS NTSC Tuner */ |
1191 | if ( i2cRead( bktr, 0xc7 ) != ABSENT ) { |
1192 | select_tuner( bktr, PHILIPS_NTSC4 ); |
1193 | goto checkDBX; |
1194 | } |
1195 | |
1196 | /* Address 0xc2/0xc3 is default (or common address) for several */ |
1197 | /* tuners and we cannot tell which is which. */ |
1198 | /* And for all other tuner i2c addresses, select the default */ |
1199 | select_tuner( bktr, DEFAULT_TUNER4 ); |
1200 | |
1201 | |
1202 | checkDBX: |
1203 | #if defined( BKTR_OVERRIDE_DBX ) |
1204 | bktr->card.dbx = BKTR_OVERRIDE_DBX; |
1205 | goto checkMSP; |
1206 | #endif |
1207 | /* Check for i2c devices */ |
1208 | if (!any_i2c_devices) { |
1209 | goto checkMSP; |
1210 | } |
1211 | |
1212 | /* probe for BTSC (dbx) chip */ |
1213 | if ( i2cRead( bktr, TDA9850_RADDR0xb7 ) != ABSENT ) |
1214 | bktr->card.dbx = 1; |
1215 | |
1216 | checkMSP: |
1217 | /* If this is a Hauppauge Bt878 card, we need to enable the |
1218 | * MSP 34xx audio chip. |
1219 | * If this is a Hauppauge Bt848 card, reset the MSP device. |
1220 | * The MSP reset line is wired to GPIO pin 5. On Bt878 cards a pulldown |
1221 | * resistor holds the device in reset until we set GPIO pin 5. |
1222 | */ |
1223 | |
1224 | /* Optionally skip the MSP reset. This is handy if you initialise the |
1225 | * MSP audio in another operating system (eg Windows) first and then |
1226 | * do a soft reboot. |
1227 | */ |
1228 | |
1229 | #ifndef BKTR_NO_MSP_RESET |
1230 | if (card == CARD_HAUPPAUGE2) { |
1231 | OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x118 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x118)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x118), 4, 0x01); (__v); })) | (1<< 5))))); bus_space_barrier((bktr)->memt, (bktr)->memh, ( 0x118), 4, 0x02); } while (0); |
1232 | OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x200 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x200)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x200), 4, 0x01); (__v); })) | (1<< 5))))); bus_space_barrier((bktr)->memt, (bktr)->memh, ( 0x200), 4, 0x02); } while (0); /* write '1' */ |
1233 | DELAY(2500)(*delay_func)(2500); /* wait 2.5ms */ |
1234 | OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x200 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x200)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x200), 4, 0x01); (__v); })) & ~( 1<<5))))); bus_space_barrier((bktr)->memt, (bktr)-> memh, (0x200), 4, 0x02); } while (0); /* write '0' */ |
1235 | DELAY(2500)(*delay_func)(2500); /* wait 2.5ms */ |
1236 | OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5))do { (((bktr)->memt)->write_4(((bktr)->memh), ((0x200 )), (((({ u_int32_t __v; __v = (((bktr)->memt)->read_4( ((bktr)->memh), ((0x200)))); bus_space_barrier((bktr)-> memt, (bktr)->memh, (0x200), 4, 0x01); (__v); })) | (1<< 5))))); bus_space_barrier((bktr)->memt, (bktr)->memh, ( 0x200), 4, 0x02); } while (0); /* write '1' */ |
1237 | DELAY(2500)(*delay_func)(2500); /* wait 2.5ms */ |
1238 | } |
1239 | #endif |
1240 | |
1241 | #if defined( BKTR_OVERRIDE_MSP ) |
1242 | bktr->card.msp3400c = BKTR_OVERRIDE_MSP; |
1243 | goto checkMSPEnd; |
1244 | #endif |
1245 | |
1246 | /* Check for i2c devices */ |
1247 | if (!any_i2c_devices) { |
1248 | goto checkMSPEnd; |
1249 | } |
1250 | |
1251 | if ( i2cRead( bktr, MSP3400C_RADDR0x81 ) != ABSENT ) { |
1252 | bktr->card.msp3400c = 1; |
1253 | } |
1254 | |
1255 | checkMSPEnd: |
1256 | |
1257 | if (bktr->card.msp3400c) { |
1258 | bktr->msp_addr = MSP3400C_WADDR0x80; |
1259 | msp_read_id( bktr ); |
1260 | printf("%s: Detected a MSP%s at 0x%x\n", bktr_name(bktr), |
1261 | bktr->msp_version_string, |
1262 | bktr->msp_addr); |
1263 | |
1264 | } |
1265 | |
1266 | /* Check for Dolby Surround Sound DPL3518A sound chip */ |
1267 | if ( i2cRead( bktr, DPL3518A_RADDR0x85 ) != ABSENT ) { |
1268 | bktr->card.dpl3518a = 1; |
1269 | } |
1270 | |
1271 | if (bktr->card.dpl3518a) { |
1272 | bktr->dpl_addr = DPL3518A_WADDR0x84; |
1273 | dpl_read_id( bktr ); |
1274 | printf("%s: Detected a DPL%s at 0x%x\n", bktr_name(bktr), |
1275 | bktr->dpl_version_string, |
1276 | bktr->dpl_addr); |
1277 | } |
1278 | |
1279 | /* Start of Check Remote */ |
1280 | /* Check for the Hauppauge IR Remote Control */ |
1281 | /* If there is an external unit, the internal will be ignored */ |
1282 | |
1283 | bktr->remote_control = 0; /* initial value */ |
1284 | |
1285 | if (any_i2c_devices) { |
1286 | if (i2cRead( bktr, HAUP_REMOTE_EXT_RADDR0x35 ) != ABSENT ) { |
1287 | bktr->remote_control = 1; |
1288 | bktr->remote_control_addr = HAUP_REMOTE_EXT_RADDR0x35; |
1289 | } else if (i2cRead( bktr, HAUP_REMOTE_INT_RADDR0x31 ) != ABSENT ) { |
1290 | bktr->remote_control = 1; |
1291 | bktr->remote_control_addr = HAUP_REMOTE_INT_RADDR0x31; |
1292 | } |
1293 | } |
1294 | |
1295 | /* If a remote control is found, poll it 5 times to turn off the LED */ |
1296 | if (bktr->remote_control) { |
1297 | int i; |
1298 | for (i=0; i<5; i++) |
1299 | i2cRead( bktr, bktr->remote_control_addr ); |
1300 | } |
1301 | /* End of Check Remote */ |
1302 | |
1303 | #if defined( BKTR_USE_PLL ) |
1304 | bktr->xtal_pll_mode = BT848_USE_PLL1; |
1305 | goto checkPLLEnd; |
1306 | #endif |
1307 | /* Default is to use XTALS and not PLL mode */ |
1308 | bktr->xtal_pll_mode = BT848_USE_XTALS0; |
1309 | |
1310 | /* Enable PLL mode for OSPREY users */ |
1311 | if (card == CARD_OSPREY7) |
1312 | bktr->xtal_pll_mode = BT848_USE_PLL1; |
1313 | |
1314 | /* Enable PLL mode for Video Highway Xtreme users */ |
1315 | if (card == CARD_VIDEO_HIGHWAY_XTREME13) |
1316 | bktr->xtal_pll_mode = BT848_USE_PLL1; |
1317 | |
1318 | /* Enable PLL mode for ATI TV_Wonder/VE */ |
1319 | if (card == CARD_TVWONDER17) |
1320 | bktr->xtal_pll_mode = BT848_USE_PLL1; |
1321 | |
1322 | |
1323 | /* Most (perhaps all) Bt878 cards need to be switched to PLL mode */ |
1324 | /* as they only fit the NTSC crystal to their cards */ |
1325 | /* Default to enabling PLL mode for all Bt878/879 cards */ |
1326 | |
1327 | if ((bktr->id==BROOKTREE_8784 || bktr->id==BROOKTREE_8795) ) |
1328 | bktr->xtal_pll_mode = BT848_USE_PLL1; |
1329 | |
1330 | |
1331 | #if defined( BKTR_USE_PLL ) |
1332 | checkPLLEnd: |
1333 | #endif |
1334 | |
1335 | |
1336 | bktr->card.tuner_pllAddr = tuner_i2c_address; |
1337 | |
1338 | if ( verbose ) { |
1339 | printf( "%s: %s", bktr_name(bktr), bktr->card.name ); |
1340 | if ( bktr->card.tuner ) |
1341 | printf( ", %s tuner", bktr->card.tuner->name ); |
1342 | if ( bktr->card.dbx ) |
1343 | printf( ", dbx stereo" ); |
1344 | if ( bktr->card.msp3400c ) |
1345 | printf( ", msp3400c stereo" ); |
1346 | if ( bktr->card.dpl3518a ) |
1347 | printf( ", dpl3518a dolby" ); |
1348 | if ( bktr->remote_control ) |
1349 | printf( ", remote control" ); |
1350 | printf( ".\n" ); |
1351 | } |
1352 | } |
1353 | |
1354 | #undef ABSENT |