File: | dev/usb/if_urtw.c |
Warning: | line 1973, column 4 Value stored to 'error' is never read |
Press '?' to see keyboard shortcuts
Keyboard shortcuts:
1 | /* $OpenBSD: if_urtw.c,v 1.71 2022/01/09 05:43:00 jsg Exp $ */ |
2 | |
3 | /*- |
4 | * Copyright (c) 2009 Martynas Venckus <martynas@openbsd.org> |
5 | * Copyright (c) 2008 Weongyo Jeong <weongyo@FreeBSD.org> |
6 | * |
7 | * Permission to use, copy, modify, and distribute this software for any |
8 | * purpose with or without fee is hereby granted, provided that the above |
9 | * copyright notice and this permission notice appear in all copies. |
10 | * |
11 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
12 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
13 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
14 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
15 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
16 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
17 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
18 | */ |
19 | |
20 | #include "bpfilter.h" |
21 | |
22 | #include <sys/param.h> |
23 | #include <sys/sockio.h> |
24 | #include <sys/mbuf.h> |
25 | #include <sys/kernel.h> |
26 | #include <sys/socket.h> |
27 | #include <sys/systm.h> |
28 | #include <sys/timeout.h> |
29 | #include <sys/conf.h> |
30 | #include <sys/device.h> |
31 | #include <sys/endian.h> |
32 | |
33 | #if NBPFILTER1 > 0 |
34 | #include <net/bpf.h> |
35 | #endif |
36 | #include <net/if.h> |
37 | #include <net/if_dl.h> |
38 | #include <net/if_media.h> |
39 | |
40 | #include <netinet/in.h> |
41 | #include <netinet/if_ether.h> |
42 | |
43 | #include <net80211/ieee80211_var.h> |
44 | #include <net80211/ieee80211_radiotap.h> |
45 | |
46 | #include <dev/usb/usb.h> |
47 | #include <dev/usb/usbdi.h> |
48 | #include <dev/usb/usbdi_util.h> |
49 | #include <dev/usb/usbdevs.h> |
50 | |
51 | #include <dev/usb/if_urtwreg.h> |
52 | |
53 | #ifdef URTW_DEBUG |
54 | #define DPRINTF(x) do { if (urtw_debug) printf x; } while (0) |
55 | #define DPRINTFN(n, x) do { if (urtw_debug >= (n)) printf x; } while (0) |
56 | int urtw_debug = 0; |
57 | #else |
58 | #define DPRINTF(x) |
59 | #define DPRINTFN(n, x) |
60 | #endif |
61 | |
62 | /* |
63 | * Recognized device vendors/products. |
64 | */ |
65 | static const struct urtw_type { |
66 | struct usb_devno dev; |
67 | uint8_t rev; |
68 | } urtw_devs[] = { |
69 | #define URTW_DEV_RTL8187(v, p) \ |
70 | { { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, URTW_HWREV_81870x01 } |
71 | #define URTW_DEV_RTL8187B(v, p) \ |
72 | { { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, URTW_HWREV_8187B0x08 } |
73 | /* Realtek RTL8187 devices. */ |
74 | URTW_DEV_RTL8187(ASUS, P5B_WIFI), |
75 | URTW_DEV_RTL8187(DICKSMITH, RTL8187), |
76 | URTW_DEV_RTL8187(LINKSYS4, WUSB54GCV2), |
77 | URTW_DEV_RTL8187(LOGITEC, RTL8187), |
78 | URTW_DEV_RTL8187(NETGEAR, WG111V2), |
79 | URTW_DEV_RTL8187(REALTEK, RTL8187), |
80 | URTW_DEV_RTL8187(SITECOMEU, WL168V1), |
81 | URTW_DEV_RTL8187(SPHAIRON, RTL8187), |
82 | URTW_DEV_RTL8187(SURECOM, EP9001G2A), |
83 | /* Realtek RTL8187B devices. */ |
84 | URTW_DEV_RTL8187B(BELKIN, F5D7050E), |
85 | URTW_DEV_RTL8187B(NETGEAR, WG111V3), |
86 | URTW_DEV_RTL8187B(REALTEK, RTL8187B_0), |
87 | URTW_DEV_RTL8187B(REALTEK, RTL8187B_1), |
88 | URTW_DEV_RTL8187B(REALTEK, RTL8187B_2), |
89 | URTW_DEV_RTL8187B(SITECOMEU, WL168V4) |
90 | #undef URTW_DEV_RTL8187 |
91 | #undef URTW_DEV_RTL8187B |
92 | }; |
93 | #define urtw_lookup(v, p)((const struct urtw_type *)usbd_match_device((const struct usb_devno *)(urtw_devs), sizeof (urtw_devs) / sizeof ((urtw_devs)[0]), sizeof ((urtw_devs)[0]), (v), (p))) \ |
94 | ((const struct urtw_type *)usb_lookup(urtw_devs, v, p)usbd_match_device((const struct usb_devno *)(urtw_devs), sizeof (urtw_devs) / sizeof ((urtw_devs)[0]), sizeof ((urtw_devs)[0 ]), (v), (p))) |
95 | |
96 | /* |
97 | * Helper read/write macros. |
98 | */ |
99 | #define urtw_read8_m(sc, val, data)do { error = urtw_read8_c(sc, val, data, 0); if (error != 0) goto fail; } while (0) do { \ |
100 | error = urtw_read8_c(sc, val, data, 0); \ |
101 | if (error != 0) \ |
102 | goto fail; \ |
103 | } while (0) |
104 | #define urtw_read8_idx_m(sc, val, data, idx)do { error = urtw_read8_c(sc, val, data, idx); if (error != 0 ) goto fail; } while (0) do { \ |
105 | error = urtw_read8_c(sc, val, data, idx); \ |
106 | if (error != 0) \ |
107 | goto fail; \ |
108 | } while (0) |
109 | #define urtw_write8_m(sc, val, data)do { error = urtw_write8_c(sc, val, data, 0); if (error != 0) goto fail; } while (0) do { \ |
110 | error = urtw_write8_c(sc, val, data, 0); \ |
111 | if (error != 0) \ |
112 | goto fail; \ |
113 | } while (0) |
114 | #define urtw_write8_idx_m(sc, val, data, idx)do { error = urtw_write8_c(sc, val, data, idx); if (error != 0 ) goto fail; } while (0) do { \ |
115 | error = urtw_write8_c(sc, val, data, idx); \ |
116 | if (error != 0) \ |
117 | goto fail; \ |
118 | } while (0) |
119 | #define urtw_read16_m(sc, val, data)do { error = urtw_read16_c(sc, val, data, 0); if (error != 0) goto fail; } while (0) do { \ |
120 | error = urtw_read16_c(sc, val, data, 0); \ |
121 | if (error != 0) \ |
122 | goto fail; \ |
123 | } while (0) |
124 | #define urtw_read16_idx_m(sc, val, data, idx)do { error = urtw_read16_c(sc, val, data, idx); if (error != 0 ) goto fail; } while (0) do { \ |
125 | error = urtw_read16_c(sc, val, data, idx); \ |
126 | if (error != 0) \ |
127 | goto fail; \ |
128 | } while (0) |
129 | #define urtw_write16_m(sc, val, data)do { error = urtw_write16_c(sc, val, data, 0); if (error != 0 ) goto fail; } while (0) do { \ |
130 | error = urtw_write16_c(sc, val, data, 0); \ |
131 | if (error != 0) \ |
132 | goto fail; \ |
133 | } while (0) |
134 | #define urtw_write16_idx_m(sc, val, data, idx)do { error = urtw_write16_c(sc, val, data, idx); if (error != 0) goto fail; } while (0) do { \ |
135 | error = urtw_write16_c(sc, val, data, idx); \ |
136 | if (error != 0) \ |
137 | goto fail; \ |
138 | } while (0) |
139 | #define urtw_read32_m(sc, val, data)do { error = urtw_read32_c(sc, val, data, 0); if (error != 0) goto fail; } while (0) do { \ |
140 | error = urtw_read32_c(sc, val, data, 0); \ |
141 | if (error != 0) \ |
142 | goto fail; \ |
143 | } while (0) |
144 | #define urtw_read32_idx_m(sc, val, data, idx)do { error = urtw_read32_c(sc, val, data, idx); if (error != 0 ) goto fail; } while (0) do { \ |
145 | error = urtw_read32_c(sc, val, data, idx); \ |
146 | if (error != 0) \ |
147 | goto fail; \ |
148 | } while (0) |
149 | #define urtw_write32_m(sc, val, data)do { error = urtw_write32_c(sc, val, data, 0); if (error != 0 ) goto fail; } while (0) do { \ |
150 | error = urtw_write32_c(sc, val, data, 0); \ |
151 | if (error != 0) \ |
152 | goto fail; \ |
153 | } while (0) |
154 | #define urtw_write32_idx_m(sc, val, data, idx)do { error = urtw_write32_c(sc, val, data, idx); if (error != 0) goto fail; } while (0) do { \ |
155 | error = urtw_write32_c(sc, val, data, idx); \ |
156 | if (error != 0) \ |
157 | goto fail; \ |
158 | } while (0) |
159 | #define urtw_8187_write_phy_ofdm(sc, val, data)do { error = urtw_8187_write_phy_ofdm_c(sc, val, data); if (error != 0) goto fail; } while (0) do { \ |
160 | error = urtw_8187_write_phy_ofdm_c(sc, val, data); \ |
161 | if (error != 0) \ |
162 | goto fail; \ |
163 | } while (0) |
164 | #define urtw_8187_write_phy_cck(sc, val, data)do { error = urtw_8187_write_phy_cck_c(sc, val, data); if (error != 0) goto fail; } while (0) do { \ |
165 | error = urtw_8187_write_phy_cck_c(sc, val, data); \ |
166 | if (error != 0) \ |
167 | goto fail; \ |
168 | } while (0) |
169 | #define urtw_8225_write(sc, val, data)do { error = urtw_8225_write_c(sc, val, data); if (error != 0 ) goto fail; } while (0) do { \ |
170 | error = urtw_8225_write_c(sc, val, data); \ |
171 | if (error != 0) \ |
172 | goto fail; \ |
173 | } while (0) |
174 | |
175 | struct urtw_pair { |
176 | uint32_t reg; |
177 | uint32_t val; |
178 | }; |
179 | |
180 | struct urtw_pair_idx { |
181 | uint8_t reg; |
182 | uint8_t val; |
183 | uint8_t idx; |
184 | }; |
185 | |
186 | static struct urtw_pair_idx urtw_8187b_regtbl[] = { |
187 | { 0xf0, 0x32, 0 }, { 0xf1, 0x32, 0 }, { 0xf2, 0x00, 0 }, |
188 | { 0xf3, 0x00, 0 }, { 0xf4, 0x32, 0 }, { 0xf5, 0x43, 0 }, |
189 | { 0xf6, 0x00, 0 }, { 0xf7, 0x00, 0 }, { 0xf8, 0x46, 0 }, |
190 | { 0xf9, 0xa4, 0 }, { 0xfa, 0x00, 0 }, { 0xfb, 0x00, 0 }, |
191 | { 0xfc, 0x96, 0 }, { 0xfd, 0xa4, 0 }, { 0xfe, 0x00, 0 }, |
192 | { 0xff, 0x00, 0 }, |
193 | |
194 | { 0x58, 0x4b, 1 }, { 0x59, 0x00, 1 }, { 0x5a, 0x4b, 1 }, |
195 | { 0x5b, 0x00, 1 }, { 0x60, 0x4b, 1 }, { 0x61, 0x09, 1 }, |
196 | { 0x62, 0x4b, 1 }, { 0x63, 0x09, 1 }, { 0xce, 0x0f, 1 }, |
197 | { 0xcf, 0x00, 1 }, { 0xe0, 0xff, 1 }, { 0xe1, 0x0f, 1 }, |
198 | { 0xe2, 0x00, 1 }, { 0xf0, 0x4e, 1 }, { 0xf1, 0x01, 1 }, |
199 | { 0xf2, 0x02, 1 }, { 0xf3, 0x03, 1 }, { 0xf4, 0x04, 1 }, |
200 | { 0xf5, 0x05, 1 }, { 0xf6, 0x06, 1 }, { 0xf7, 0x07, 1 }, |
201 | { 0xf8, 0x08, 1 }, |
202 | |
203 | { 0x4e, 0x00, 2 }, { 0x0c, 0x04, 2 }, { 0x21, 0x61, 2 }, |
204 | { 0x22, 0x68, 2 }, { 0x23, 0x6f, 2 }, { 0x24, 0x76, 2 }, |
205 | { 0x25, 0x7d, 2 }, { 0x26, 0x84, 2 }, { 0x27, 0x8d, 2 }, |
206 | { 0x4d, 0x08, 2 }, { 0x50, 0x05, 2 }, { 0x51, 0xf5, 2 }, |
207 | { 0x52, 0x04, 2 }, { 0x53, 0xa0, 2 }, { 0x54, 0x1f, 2 }, |
208 | { 0x55, 0x23, 2 }, { 0x56, 0x45, 2 }, { 0x57, 0x67, 2 }, |
209 | { 0x58, 0x08, 2 }, { 0x59, 0x08, 2 }, { 0x5a, 0x08, 2 }, |
210 | { 0x5b, 0x08, 2 }, { 0x60, 0x08, 2 }, { 0x61, 0x08, 2 }, |
211 | { 0x62, 0x08, 2 }, { 0x63, 0x08, 2 }, { 0x64, 0xcf, 2 }, |
212 | { 0x72, 0x56, 2 }, { 0x73, 0x9a, 2 }, |
213 | |
214 | { 0x34, 0xf0, 0 }, { 0x35, 0x0f, 0 }, { 0x5b, 0x40, 0 }, |
215 | { 0x84, 0x88, 0 }, { 0x85, 0x24, 0 }, { 0x88, 0x54, 0 }, |
216 | { 0x8b, 0xb8, 0 }, { 0x8c, 0x07, 0 }, { 0x8d, 0x00, 0 }, |
217 | { 0x94, 0x1b, 0 }, { 0x95, 0x12, 0 }, { 0x96, 0x00, 0 }, |
218 | { 0x97, 0x06, 0 }, { 0x9d, 0x1a, 0 }, { 0x9f, 0x10, 0 }, |
219 | { 0xb4, 0x22, 0 }, { 0xbe, 0x80, 0 }, { 0xdb, 0x00, 0 }, |
220 | { 0xee, 0x00, 0 }, { 0x91, 0x03, 0 }, |
221 | |
222 | { 0x4c, 0x00, 2 }, { 0x9f, 0x00, 3 }, { 0x8c, 0x01, 0 }, |
223 | { 0x8d, 0x10, 0 }, { 0x8e, 0x08, 0 }, { 0x8f, 0x00, 0 } |
224 | }; |
225 | |
226 | static uint8_t urtw_8225_agc[] = { |
227 | 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9d, 0x9c, 0x9b, |
228 | 0x9a, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, 0x90, |
229 | 0x8f, 0x8e, 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86, 0x85, |
230 | 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e, 0x3d, 0x3c, 0x3b, 0x3a, |
231 | 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, |
232 | 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, |
233 | 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, |
234 | 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, |
235 | 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, 0x05, 0x04, 0x03, |
236 | 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, |
237 | 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, |
238 | 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01 |
239 | }; |
240 | |
241 | static uint32_t urtw_8225_channel[] = { |
242 | 0x0000, /* dummy channel 0 */ |
243 | 0x085c, /* 1 */ |
244 | 0x08dc, /* 2 */ |
245 | 0x095c, /* 3 */ |
246 | 0x09dc, /* 4 */ |
247 | 0x0a5c, /* 5 */ |
248 | 0x0adc, /* 6 */ |
249 | 0x0b5c, /* 7 */ |
250 | 0x0bdc, /* 8 */ |
251 | 0x0c5c, /* 9 */ |
252 | 0x0cdc, /* 10 */ |
253 | 0x0d5c, /* 11 */ |
254 | 0x0ddc, /* 12 */ |
255 | 0x0e5c, /* 13 */ |
256 | 0x0f72, /* 14 */ |
257 | }; |
258 | |
259 | static uint8_t urtw_8225_gain[] = { |
260 | 0x23, 0x88, 0x7c, 0xa5, /* -82dbm */ |
261 | 0x23, 0x88, 0x7c, 0xb5, /* -82dbm */ |
262 | 0x23, 0x88, 0x7c, 0xc5, /* -82dbm */ |
263 | 0x33, 0x80, 0x79, 0xc5, /* -78dbm */ |
264 | 0x43, 0x78, 0x76, 0xc5, /* -74dbm */ |
265 | 0x53, 0x60, 0x73, 0xc5, /* -70dbm */ |
266 | 0x63, 0x58, 0x70, 0xc5, /* -66dbm */ |
267 | }; |
268 | |
269 | static struct urtw_pair urtw_8225_rf_part1[] = { |
270 | { 0x00, 0x0067 }, { 0x01, 0x0fe0 }, { 0x02, 0x044d }, { 0x03, 0x0441 }, |
271 | { 0x04, 0x0486 }, { 0x05, 0x0bc0 }, { 0x06, 0x0ae6 }, { 0x07, 0x082a }, |
272 | { 0x08, 0x001f }, { 0x09, 0x0334 }, { 0x0a, 0x0fd4 }, { 0x0b, 0x0391 }, |
273 | { 0x0c, 0x0050 }, { 0x0d, 0x06db }, { 0x0e, 0x0029 }, { 0x0f, 0x0914 } |
274 | }; |
275 | |
276 | static struct urtw_pair urtw_8225_rf_part2[] = { |
277 | { 0x00, 0x01 }, { 0x01, 0x02 }, { 0x02, 0x42 }, { 0x03, 0x00 }, |
278 | { 0x04, 0x00 }, { 0x05, 0x00 }, { 0x06, 0x40 }, { 0x07, 0x00 }, |
279 | { 0x08, 0x40 }, { 0x09, 0xfe }, { 0x0a, 0x09 }, { 0x0b, 0x80 }, |
280 | { 0x0c, 0x01 }, { 0x0e, 0xd3 }, { 0x0f, 0x38 }, { 0x10, 0x84 }, |
281 | { 0x11, 0x06 }, { 0x12, 0x20 }, { 0x13, 0x20 }, { 0x14, 0x00 }, |
282 | { 0x15, 0x40 }, { 0x16, 0x00 }, { 0x17, 0x40 }, { 0x18, 0xef }, |
283 | { 0x19, 0x19 }, { 0x1a, 0x20 }, { 0x1b, 0x76 }, { 0x1c, 0x04 }, |
284 | { 0x1e, 0x95 }, { 0x1f, 0x75 }, { 0x20, 0x1f }, { 0x21, 0x27 }, |
285 | { 0x22, 0x16 }, { 0x24, 0x46 }, { 0x25, 0x20 }, { 0x26, 0x90 }, |
286 | { 0x27, 0x88 } |
287 | }; |
288 | |
289 | static struct urtw_pair urtw_8225_rf_part3[] = { |
290 | { 0x00, 0x98 }, { 0x03, 0x20 }, { 0x04, 0x7e }, { 0x05, 0x12 }, |
291 | { 0x06, 0xfc }, { 0x07, 0x78 }, { 0x08, 0x2e }, { 0x10, 0x9b }, |
292 | { 0x11, 0x88 }, { 0x12, 0x47 }, { 0x13, 0xd0 }, { 0x19, 0x00 }, |
293 | { 0x1a, 0xa0 }, { 0x1b, 0x08 }, { 0x40, 0x86 }, { 0x41, 0x8d }, |
294 | { 0x42, 0x15 }, { 0x43, 0x18 }, { 0x44, 0x1f }, { 0x45, 0x1e }, |
295 | { 0x46, 0x1a }, { 0x47, 0x15 }, { 0x48, 0x10 }, { 0x49, 0x0a }, |
296 | { 0x4a, 0x05 }, { 0x4b, 0x02 }, { 0x4c, 0x05 } |
297 | }; |
298 | |
299 | static uint16_t urtw_8225_rxgain[] = { |
300 | 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, |
301 | 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, |
302 | 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, |
303 | 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, |
304 | 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, |
305 | 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, |
306 | 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, |
307 | 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, |
308 | 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, |
309 | 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, |
310 | 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3, |
311 | 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb |
312 | }; |
313 | |
314 | static uint8_t urtw_8225_threshold[] = { |
315 | 0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd |
316 | }; |
317 | |
318 | static uint8_t urtw_8225_tx_gain_cck_ofdm[] = { |
319 | 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e |
320 | }; |
321 | |
322 | static uint8_t urtw_8225_txpwr_cck[] = { |
323 | 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02, |
324 | 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02, |
325 | 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02, |
326 | 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02, |
327 | 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03, |
328 | 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03 |
329 | }; |
330 | |
331 | static uint8_t urtw_8225_txpwr_cck_ch14[] = { |
332 | 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00, |
333 | 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00, |
334 | 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00, |
335 | 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00, |
336 | 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00, |
337 | 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00 |
338 | }; |
339 | |
340 | static uint8_t urtw_8225_txpwr_ofdm[] = { |
341 | 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4 |
342 | }; |
343 | |
344 | static uint8_t urtw_8225v2_agc[] = { |
345 | 0x5e, 0x5e, 0x5e, 0x5e, 0x5d, 0x5b, 0x59, 0x57, |
346 | 0x55, 0x53, 0x51, 0x4f, 0x4d, 0x4b, 0x49, 0x47, |
347 | 0x45, 0x43, 0x41, 0x3f, 0x3d, 0x3b, 0x39, 0x37, |
348 | 0x35, 0x33, 0x31, 0x2f, 0x2d, 0x2b, 0x29, 0x27, |
349 | 0x25, 0x23, 0x21, 0x1f, 0x1d, 0x1b, 0x19, 0x17, |
350 | 0x15, 0x13, 0x11, 0x0f, 0x0d, 0x0b, 0x09, 0x07, |
351 | 0x05, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, |
352 | 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, |
353 | 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, |
354 | 0x19, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, |
355 | 0x26, 0x27, 0x27, 0x28, 0x28, 0x29, 0x2a, 0x2a, |
356 | 0x2a, 0x2b, 0x2b, 0x2b, 0x2c, 0x2c, 0x2c, 0x2d, |
357 | 0x2d, 0x2d, 0x2d, 0x2e, 0x2e, 0x2e, 0x2e, 0x2f, |
358 | 0x2f, 0x2f, 0x30, 0x30, 0x31, 0x31, 0x31, 0x31, |
359 | 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, |
360 | 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31 |
361 | }; |
362 | |
363 | static uint8_t urtw_8225v2_ofdm[] = { |
364 | 0x10, 0x0d, 0x01, 0x00, 0x14, 0xfb, 0xfb, 0x60, |
365 | 0x00, 0x60, 0x00, 0x00, 0x00, 0x5c, 0x00, 0x00, |
366 | 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xa8, 0x26, |
367 | 0x32, 0x33, 0x07, 0xa5, 0x6f, 0x55, 0xc8, 0xb3, |
368 | 0x0a, 0xe1, 0x2c, 0x8a, 0x86, 0x83, 0x34, 0x0f, |
369 | 0x4f, 0x24, 0x6f, 0xc2, 0x6b, 0x40, 0x80, 0x00, |
370 | 0xc0, 0xc1, 0x58, 0xf1, 0x00, 0xe4, 0x90, 0x3e, |
371 | 0x6d, 0x3c, 0xfb, 0x07 |
372 | }; |
373 | |
374 | static uint8_t urtw_8225v2_gain_bg[] = { |
375 | 0x23, 0x15, 0xa5, /* -82-1dbm */ |
376 | 0x23, 0x15, 0xb5, /* -82-2dbm */ |
377 | 0x23, 0x15, 0xc5, /* -82-3dbm */ |
378 | 0x33, 0x15, 0xc5, /* -78dbm */ |
379 | 0x43, 0x15, 0xc5, /* -74dbm */ |
380 | 0x53, 0x15, 0xc5, /* -70dbm */ |
381 | 0x63, 0x15, 0xc5, /* -66dbm */ |
382 | }; |
383 | |
384 | static struct urtw_pair urtw_8225v2_rf_part1[] = { |
385 | { 0x00, 0x02bf }, { 0x01, 0x0ee0 }, { 0x02, 0x044d }, { 0x03, 0x0441 }, |
386 | { 0x04, 0x08c3 }, { 0x05, 0x0c72 }, { 0x06, 0x00e6 }, { 0x07, 0x082a }, |
387 | { 0x08, 0x003f }, { 0x09, 0x0335 }, { 0x0a, 0x09d4 }, { 0x0b, 0x07bb }, |
388 | { 0x0c, 0x0850 }, { 0x0d, 0x0cdf }, { 0x0e, 0x002b }, { 0x0f, 0x0114 } |
389 | }; |
390 | |
391 | static struct urtw_pair urtw_8225v2_rf_part2[] = { |
392 | { 0x00, 0x01 }, { 0x01, 0x02 }, { 0x02, 0x42 }, { 0x03, 0x00 }, |
393 | { 0x04, 0x00 }, { 0x05, 0x00 }, { 0x06, 0x40 }, { 0x07, 0x00 }, |
394 | { 0x08, 0x40 }, { 0x09, 0xfe }, { 0x0a, 0x08 }, { 0x0b, 0x80 }, |
395 | { 0x0c, 0x01 }, { 0x0d, 0x43 }, { 0x0e, 0xd3 }, { 0x0f, 0x38 }, |
396 | { 0x10, 0x84 }, { 0x11, 0x07 }, { 0x12, 0x20 }, { 0x13, 0x20 }, |
397 | { 0x14, 0x00 }, { 0x15, 0x40 }, { 0x16, 0x00 }, { 0x17, 0x40 }, |
398 | { 0x18, 0xef }, { 0x19, 0x19 }, { 0x1a, 0x20 }, { 0x1b, 0x15 }, |
399 | { 0x1c, 0x04 }, { 0x1d, 0xc5 }, { 0x1e, 0x95 }, { 0x1f, 0x75 }, |
400 | { 0x20, 0x1f }, { 0x21, 0x17 }, { 0x22, 0x16 }, { 0x23, 0x80 }, |
401 | { 0x24, 0x46 }, { 0x25, 0x00 }, { 0x26, 0x90 }, { 0x27, 0x88 } |
402 | }; |
403 | |
404 | static struct urtw_pair urtw_8225v2_rf_part3[] = { |
405 | { 0x00, 0x98 }, { 0x03, 0x20 }, { 0x04, 0x7e }, { 0x05, 0x12 }, |
406 | { 0x06, 0xfc }, { 0x07, 0x78 }, { 0x08, 0x2e }, { 0x09, 0x11 }, |
407 | { 0x0a, 0x17 }, { 0x0b, 0x11 }, { 0x10, 0x9b }, { 0x11, 0x88 }, |
408 | { 0x12, 0x47 }, { 0x13, 0xd0 }, { 0x19, 0x00 }, { 0x1a, 0xa0 }, |
409 | { 0x1b, 0x08 }, { 0x1d, 0x00 }, { 0x40, 0x86 }, { 0x41, 0x9d }, |
410 | { 0x42, 0x15 }, { 0x43, 0x18 }, { 0x44, 0x36 }, { 0x45, 0x35 }, |
411 | { 0x46, 0x2e }, { 0x47, 0x25 }, { 0x48, 0x1c }, { 0x49, 0x12 }, |
412 | { 0x4a, 0x09 }, { 0x4b, 0x04 }, { 0x4c, 0x05 } |
413 | }; |
414 | |
415 | static uint16_t urtw_8225v2_rxgain[] = { |
416 | 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, |
417 | 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, |
418 | 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, |
419 | 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, |
420 | 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, |
421 | 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, |
422 | 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, |
423 | 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, |
424 | 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, |
425 | 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, |
426 | 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3, |
427 | 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb |
428 | }; |
429 | |
430 | static uint8_t urtw_8225v2_tx_gain_cck_ofdm[] = { |
431 | 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, |
432 | 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, |
433 | 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, |
434 | 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, |
435 | 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, |
436 | 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23 |
437 | }; |
438 | |
439 | static uint8_t urtw_8225v2_txpwr_cck[] = { |
440 | 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04, |
441 | 0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03, |
442 | 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03, |
443 | 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03 |
444 | }; |
445 | |
446 | static uint8_t urtw_8225v2_txpwr_cck_ch14[] = { |
447 | 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00, |
448 | 0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00, |
449 | 0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00, |
450 | 0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00 |
451 | }; |
452 | |
453 | static struct urtw_pair urtw_8225v2_b_rf[] = { |
454 | { 0x00, 0x00b7 }, { 0x01, 0x0ee0 }, { 0x02, 0x044d }, { 0x03, 0x0441 }, |
455 | { 0x04, 0x08c3 }, { 0x05, 0x0c72 }, { 0x06, 0x00e6 }, { 0x07, 0x082a }, |
456 | { 0x08, 0x003f }, { 0x09, 0x0335 }, { 0x0a, 0x09d4 }, { 0x0b, 0x07bb }, |
457 | { 0x0c, 0x0850 }, { 0x0d, 0x0cdf }, { 0x0e, 0x002b }, { 0x0f, 0x0114 }, |
458 | { 0x00, 0x01b7 } |
459 | }; |
460 | |
461 | static struct urtw_pair urtw_ratetable[] = { |
462 | { 2, 0 }, { 4, 1 }, { 11, 2 }, { 12, 4 }, { 18, 5 }, |
463 | { 22, 3 }, { 24, 6 }, { 36, 7 }, { 48, 8 }, { 72, 9 }, |
464 | { 96, 10 }, { 108, 11 } |
465 | }; |
466 | |
467 | int urtw_init(struct ifnet *); |
468 | void urtw_stop(struct ifnet *, int); |
469 | int urtw_ioctl(struct ifnet *, u_long, caddr_t); |
470 | void urtw_start(struct ifnet *); |
471 | int urtw_alloc_rx_data_list(struct urtw_softc *); |
472 | void urtw_free_rx_data_list(struct urtw_softc *); |
473 | int urtw_alloc_tx_data_list(struct urtw_softc *); |
474 | void urtw_free_tx_data_list(struct urtw_softc *); |
475 | void urtw_rxeof(struct usbd_xfer *, void *, |
476 | usbd_status); |
477 | int urtw_tx_start(struct urtw_softc *, |
478 | struct ieee80211_node *, struct mbuf *, int); |
479 | void urtw_txeof_low(struct usbd_xfer *, void *, |
480 | usbd_status); |
481 | void urtw_txeof_normal(struct usbd_xfer *, void *, |
482 | usbd_status); |
483 | void urtw_next_scan(void *); |
484 | void urtw_task(void *); |
485 | void urtw_ledusbtask(void *); |
486 | void urtw_ledtask(void *); |
487 | int urtw_media_change(struct ifnet *); |
488 | int urtw_newstate(struct ieee80211com *, enum ieee80211_state, int); |
489 | void urtw_watchdog(struct ifnet *); |
490 | void urtw_set_multi(struct urtw_softc *); |
491 | void urtw_set_chan(struct urtw_softc *, struct ieee80211_channel *); |
492 | int urtw_isbmode(uint16_t); |
493 | uint16_t urtw_rate2rtl(int rate); |
494 | uint16_t urtw_rtl2rate(int); |
495 | usbd_status urtw_set_rate(struct urtw_softc *); |
496 | usbd_status urtw_update_msr(struct urtw_softc *); |
497 | usbd_status urtw_read8_c(struct urtw_softc *, int, uint8_t *, uint8_t); |
498 | usbd_status urtw_read16_c(struct urtw_softc *, int, uint16_t *, uint8_t); |
499 | usbd_status urtw_read32_c(struct urtw_softc *, int, uint32_t *, uint8_t); |
500 | usbd_status urtw_write8_c(struct urtw_softc *, int, uint8_t, uint8_t); |
501 | usbd_status urtw_write16_c(struct urtw_softc *, int, uint16_t, uint8_t); |
502 | usbd_status urtw_write32_c(struct urtw_softc *, int, uint32_t, uint8_t); |
503 | usbd_status urtw_eprom_cs(struct urtw_softc *, int); |
504 | usbd_status urtw_eprom_ck(struct urtw_softc *); |
505 | usbd_status urtw_eprom_sendbits(struct urtw_softc *, int16_t *, |
506 | int); |
507 | usbd_status urtw_eprom_read32(struct urtw_softc *, uint32_t, |
508 | uint32_t *); |
509 | usbd_status urtw_eprom_readbit(struct urtw_softc *, int16_t *); |
510 | usbd_status urtw_eprom_writebit(struct urtw_softc *, int16_t); |
511 | usbd_status urtw_get_macaddr(struct urtw_softc *); |
512 | usbd_status urtw_get_txpwr(struct urtw_softc *); |
513 | usbd_status urtw_get_rfchip(struct urtw_softc *); |
514 | usbd_status urtw_led_init(struct urtw_softc *); |
515 | usbd_status urtw_8185_rf_pins_enable(struct urtw_softc *); |
516 | usbd_status urtw_8185_tx_antenna(struct urtw_softc *, uint8_t); |
517 | usbd_status urtw_8187_write_phy(struct urtw_softc *, uint8_t, uint32_t); |
518 | usbd_status urtw_8187_write_phy_ofdm_c(struct urtw_softc *, uint8_t, |
519 | uint32_t); |
520 | usbd_status urtw_8187_write_phy_cck_c(struct urtw_softc *, uint8_t, |
521 | uint32_t); |
522 | usbd_status urtw_8225_setgain(struct urtw_softc *, int16_t); |
523 | usbd_status urtw_8225_usb_init(struct urtw_softc *); |
524 | usbd_status urtw_8225_write_c(struct urtw_softc *, uint8_t, uint16_t); |
525 | usbd_status urtw_8225_write_s16(struct urtw_softc *, uint8_t, int, |
526 | uint16_t); |
527 | usbd_status urtw_8225_read(struct urtw_softc *, uint8_t, uint32_t *); |
528 | usbd_status urtw_8225_rf_init(struct urtw_rf *); |
529 | usbd_status urtw_8225_rf_set_chan(struct urtw_rf *, int); |
530 | usbd_status urtw_8225_rf_set_sens(struct urtw_rf *); |
531 | usbd_status urtw_8225_set_txpwrlvl(struct urtw_softc *, int); |
532 | usbd_status urtw_8225v2_rf_init(struct urtw_rf *); |
533 | usbd_status urtw_8225v2_rf_set_chan(struct urtw_rf *, int); |
534 | usbd_status urtw_8225v2_set_txpwrlvl(struct urtw_softc *, int); |
535 | usbd_status urtw_8225v2_setgain(struct urtw_softc *, int16_t); |
536 | usbd_status urtw_8225_isv2(struct urtw_softc *, int *); |
537 | usbd_status urtw_read8e(struct urtw_softc *, int, uint8_t *); |
538 | usbd_status urtw_write8e(struct urtw_softc *, int, uint8_t); |
539 | usbd_status urtw_8180_set_anaparam(struct urtw_softc *, uint32_t); |
540 | usbd_status urtw_8185_set_anaparam2(struct urtw_softc *, uint32_t); |
541 | usbd_status urtw_open_pipes(struct urtw_softc *); |
542 | usbd_status urtw_close_pipes(struct urtw_softc *); |
543 | usbd_status urtw_intr_enable(struct urtw_softc *); |
544 | usbd_status urtw_intr_disable(struct urtw_softc *); |
545 | usbd_status urtw_reset(struct urtw_softc *); |
546 | usbd_status urtw_led_on(struct urtw_softc *, int); |
547 | usbd_status urtw_led_ctl(struct urtw_softc *, int); |
548 | usbd_status urtw_led_blink(struct urtw_softc *); |
549 | usbd_status urtw_led_mode0(struct urtw_softc *, int); |
550 | usbd_status urtw_led_mode1(struct urtw_softc *, int); |
551 | usbd_status urtw_led_mode2(struct urtw_softc *, int); |
552 | usbd_status urtw_led_mode3(struct urtw_softc *, int); |
553 | usbd_status urtw_rx_setconf(struct urtw_softc *); |
554 | usbd_status urtw_rx_enable(struct urtw_softc *); |
555 | usbd_status urtw_tx_enable(struct urtw_softc *); |
556 | usbd_status urtw_8187b_update_wmm(struct urtw_softc *); |
557 | usbd_status urtw_8187b_reset(struct urtw_softc *); |
558 | int urtw_8187b_init(struct ifnet *); |
559 | usbd_status urtw_8225v2_b_config_mac(struct urtw_softc *); |
560 | usbd_status urtw_8225v2_b_init_rfe(struct urtw_softc *); |
561 | usbd_status urtw_8225v2_b_update_chan(struct urtw_softc *); |
562 | usbd_status urtw_8225v2_b_rf_init(struct urtw_rf *); |
563 | usbd_status urtw_8225v2_b_rf_set_chan(struct urtw_rf *, int); |
564 | usbd_status urtw_8225v2_b_set_txpwrlvl(struct urtw_softc *, int); |
565 | int urtw_set_bssid(struct urtw_softc *, const uint8_t *); |
566 | int urtw_set_macaddr(struct urtw_softc *, const uint8_t *); |
567 | |
568 | int urtw_match(struct device *, void *, void *); |
569 | void urtw_attach(struct device *, struct device *, void *); |
570 | int urtw_detach(struct device *, int); |
571 | |
572 | struct cfdriver urtw_cd = { |
573 | NULL((void *)0), "urtw", DV_IFNET |
574 | }; |
575 | |
576 | const struct cfattach urtw_ca = { |
577 | sizeof(struct urtw_softc), urtw_match, urtw_attach, urtw_detach |
578 | }; |
579 | |
580 | int |
581 | urtw_match(struct device *parent, void *match, void *aux) |
582 | { |
583 | struct usb_attach_arg *uaa = aux; |
584 | |
585 | if (uaa->iface == NULL((void *)0) || uaa->configno != 1) |
586 | return (UMATCH_NONE0); |
587 | |
588 | return ((urtw_lookup(uaa->vendor, uaa->product)((const struct urtw_type *)usbd_match_device((const struct usb_devno *)(urtw_devs), sizeof (urtw_devs) / sizeof ((urtw_devs)[0]), sizeof ((urtw_devs)[0]), (uaa->vendor), (uaa->product) )) != NULL((void *)0)) ? |
589 | UMATCH_VENDOR_PRODUCT_CONF_IFACE8 : UMATCH_NONE0); |
590 | } |
591 | |
592 | void |
593 | urtw_attach(struct device *parent, struct device *self, void *aux) |
594 | { |
595 | struct urtw_softc *sc = (struct urtw_softc *)self; |
596 | struct usb_attach_arg *uaa = aux; |
597 | struct ieee80211com *ic = &sc->sc_ic; |
598 | struct ifnet *ifp = &ic->ic_ific_ac.ac_if; |
599 | usbd_status error; |
600 | uint8_t data8; |
601 | uint32_t data; |
602 | int i; |
603 | |
604 | sc->sc_udev = uaa->device; |
605 | sc->sc_iface = uaa->iface; |
606 | sc->sc_hwrev = urtw_lookup(uaa->vendor, uaa->product)((const struct urtw_type *)usbd_match_device((const struct usb_devno *)(urtw_devs), sizeof (urtw_devs) / sizeof ((urtw_devs)[0]), sizeof ((urtw_devs)[0]), (uaa->vendor), (uaa->product) ))->rev; |
607 | |
608 | printf("%s: ", sc->sc_dev.dv_xname); |
609 | |
610 | if (sc->sc_hwrev & URTW_HWREV_81870x01) { |
611 | urtw_read32_m(sc, URTW_TX_CONF, &data)do { error = urtw_read32_c(sc, 0x0040, &data, 0); if (error != 0) goto fail; } while (0); |
612 | data &= URTW_TX_HWREV_MASK(7 << 25); |
613 | switch (data) { |
614 | case URTW_TX_HWREV_8187_D(5 << 25): |
615 | sc->sc_hwrev |= URTW_HWREV_8187_D0x04; |
616 | printf("RTL8187 rev D"); |
617 | break; |
618 | case URTW_TX_HWREV_8187B_D(6 << 25): |
619 | /* |
620 | * Detect Realtek RTL8187B devices that use |
621 | * USB IDs of RTL8187. |
622 | */ |
623 | sc->sc_hwrev = URTW_HWREV_8187B0x08 | URTW_HWREV_8187B_B0x10; |
624 | printf("RTL8187B rev B (early)"); |
625 | break; |
626 | default: |
627 | sc->sc_hwrev |= URTW_HWREV_8187_B0x02; |
628 | printf("RTL8187 rev 0x%02x", data >> 25); |
629 | break; |
630 | } |
631 | } else { |
632 | /* RTL8187B hwrev register. */ |
633 | urtw_read8_m(sc, URTW_8187B_HWREV, &data8)do { error = urtw_read8_c(sc, 0x00e1, &data8, 0); if (error != 0) goto fail; } while (0); |
634 | switch (data8) { |
635 | case URTW_8187B_HWREV_8187B_B(0x0): |
636 | sc->sc_hwrev |= URTW_HWREV_8187B_B0x10; |
637 | printf("RTL8187B rev B"); |
638 | break; |
639 | case URTW_8187B_HWREV_8187B_D(0x1): |
640 | sc->sc_hwrev |= URTW_HWREV_8187B_D0x20; |
641 | printf("RTL8187B rev D"); |
642 | break; |
643 | case URTW_8187B_HWREV_8187B_E(0x2): |
644 | sc->sc_hwrev |= URTW_HWREV_8187B_E0x40; |
645 | printf("RTL8187B rev E"); |
646 | break; |
647 | default: |
648 | sc->sc_hwrev |= URTW_HWREV_8187B_B0x10; |
649 | printf("RTL8187B rev 0x%02x", data8); |
650 | break; |
651 | } |
652 | } |
653 | |
654 | urtw_read32_m(sc, URTW_RX, &data)do { error = urtw_read32_c(sc, 0x0044, &data, 0); if (error != 0) goto fail; } while (0); |
655 | sc->sc_epromtype = (data & URTW_RX_9356SEL(1 << 6)) ? URTW_EEPROM_93C561 : |
656 | URTW_EEPROM_93C460; |
657 | |
658 | error = urtw_get_rfchip(sc); |
659 | if (error != 0) |
660 | goto fail; |
661 | error = urtw_get_macaddr(sc); |
662 | if (error != 0) |
663 | goto fail; |
664 | error = urtw_get_txpwr(sc); |
665 | if (error != 0) |
666 | goto fail; |
667 | error = urtw_led_init(sc); /* XXX incomplete */ |
668 | if (error != 0) |
669 | goto fail; |
670 | |
671 | sc->sc_rts_retry = URTW_DEFAULT_RTS_RETRY7; |
672 | sc->sc_tx_retry = URTW_DEFAULT_TX_RETRY7; |
673 | sc->sc_currate = 3; |
674 | /* XXX for what? */ |
675 | sc->sc_preamble_mode = 2; |
676 | |
677 | usb_init_task(&sc->sc_task, urtw_task, sc, USB_TASK_TYPE_GENERIC)((&sc->sc_task)->fun = (urtw_task), (&sc->sc_task )->arg = (sc), (&sc->sc_task)->type = (0), (& sc->sc_task)->state = 0x0); |
678 | usb_init_task(&sc->sc_ledtask, urtw_ledusbtask, sc,((&sc->sc_ledtask)->fun = (urtw_ledusbtask), (& sc->sc_ledtask)->arg = (sc), (&sc->sc_ledtask)-> type = (0), (&sc->sc_ledtask)->state = 0x0) |
679 | USB_TASK_TYPE_GENERIC)((&sc->sc_ledtask)->fun = (urtw_ledusbtask), (& sc->sc_ledtask)->arg = (sc), (&sc->sc_ledtask)-> type = (0), (&sc->sc_ledtask)->state = 0x0); |
680 | timeout_set(&sc->scan_to, urtw_next_scan, sc); |
681 | timeout_set(&sc->sc_led_ch, urtw_ledtask, sc); |
682 | |
683 | ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ |
684 | ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ |
685 | ic->ic_state = IEEE80211_S_INIT; |
686 | |
687 | /* set device capabilities */ |
688 | ic->ic_caps = |
689 | IEEE80211_C_MONITOR0x00000200 | /* monitor mode supported */ |
690 | IEEE80211_C_TXPMGT0x00000040 | /* tx power management */ |
691 | IEEE80211_C_SHPREAMBLE0x00000100 | /* short preamble supported */ |
692 | IEEE80211_C_SHSLOT0x00000080 | /* short slot time supported */ |
693 | IEEE80211_C_WEP0x00000001 | /* s/w WEP */ |
694 | IEEE80211_C_RSN0x00001000; /* WPA/RSN */ |
695 | |
696 | /* set supported .11b and .11g rates */ |
697 | ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b; |
698 | ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g; |
699 | |
700 | /* set supported .11b and .11g channels (1 through 14) */ |
701 | for (i = 1; i <= 14; i++) { |
702 | ic->ic_channels[i].ic_freq = |
703 | ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ0x0080); |
704 | ic->ic_channels[i].ic_flags = |
705 | IEEE80211_CHAN_CCK0x0020 | IEEE80211_CHAN_OFDM0x0040 | |
706 | IEEE80211_CHAN_DYN0x0400 | IEEE80211_CHAN_2GHZ0x0080; |
707 | } |
708 | |
709 | ifp->if_softc = sc; |
710 | ifp->if_flags = IFF_BROADCAST0x2 | IFF_SIMPLEX0x800 | IFF_MULTICAST0x8000; |
711 | if (sc->sc_hwrev & URTW_HWREV_81870x01) { |
712 | sc->sc_init = urtw_init; |
713 | } else { |
714 | sc->sc_init = urtw_8187b_init; |
715 | } |
716 | ifp->if_ioctl = urtw_ioctl; |
717 | ifp->if_start = urtw_start; |
718 | ifp->if_watchdog = urtw_watchdog; |
719 | memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ)__builtin_memcpy((ifp->if_xname), (sc->sc_dev.dv_xname) , (16)); |
720 | |
721 | if_attach(ifp); |
722 | ieee80211_ifattach(ifp); |
723 | |
724 | /* override state transition machine */ |
725 | sc->sc_newstate = ic->ic_newstate; |
726 | ic->ic_newstate = urtw_newstate; |
727 | ieee80211_media_init(ifp, urtw_media_change, ieee80211_media_status); |
728 | |
729 | #if NBPFILTER1 > 0 |
730 | bpfattach(&sc->sc_drvbpf, ifp, DLT_IEEE802_11_RADIO127, |
731 | sizeof (struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN64); |
732 | |
733 | sc->sc_rxtap_len = sizeof sc->sc_rxtapu; |
734 | sc->sc_rxtapsc_rxtapu.th.wr_ihdr.it_len = htole16(sc->sc_rxtap_len)((__uint16_t)(sc->sc_rxtap_len)); |
735 | sc->sc_rxtapsc_rxtapu.th.wr_ihdr.it_present = htole32(URTW_RX_RADIOTAP_PRESENT)((__uint32_t)(((1 << IEEE80211_RADIOTAP_FLAGS) | (1 << IEEE80211_RADIOTAP_CHANNEL) | (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL )))); |
736 | |
737 | sc->sc_txtap_len = sizeof sc->sc_txtapu; |
738 | sc->sc_txtapsc_txtapu.th.wt_ihdr.it_len = htole16(sc->sc_txtap_len)((__uint16_t)(sc->sc_txtap_len)); |
739 | sc->sc_txtapsc_txtapu.th.wt_ihdr.it_present = htole32(URTW_TX_RADIOTAP_PRESENT)((__uint32_t)(((1 << IEEE80211_RADIOTAP_FLAGS) | (1 << IEEE80211_RADIOTAP_CHANNEL)))); |
740 | #endif |
741 | |
742 | printf(", address %s\n", ether_sprintf(ic->ic_myaddr)); |
743 | |
744 | return; |
745 | fail: |
746 | printf(": %s failed!\n", __func__); |
747 | } |
748 | |
749 | int |
750 | urtw_detach(struct device *self, int flags) |
751 | { |
752 | struct urtw_softc *sc = (struct urtw_softc *)self; |
753 | struct ifnet *ifp = &sc->sc_ic.ic_ific_ac.ac_if; |
754 | int s; |
755 | |
756 | s = splusb()splraise(0x5); |
757 | |
758 | if (timeout_initialized(&sc->scan_to)((&sc->scan_to)->to_flags & 0x04)) |
759 | timeout_del(&sc->scan_to); |
760 | if (timeout_initialized(&sc->sc_led_ch)((&sc->sc_led_ch)->to_flags & 0x04)) |
761 | timeout_del(&sc->sc_led_ch); |
762 | |
763 | usb_rem_wait_task(sc->sc_udev, &sc->sc_task); |
764 | usb_rem_wait_task(sc->sc_udev, &sc->sc_ledtask); |
765 | |
766 | usbd_ref_wait(sc->sc_udev); |
767 | |
768 | if (ifp->if_softc != NULL((void *)0)) { |
769 | ieee80211_ifdetach(ifp); /* free all nodes */ |
770 | if_detach(ifp); |
771 | } |
772 | |
773 | /* abort and free xfers */ |
774 | urtw_free_tx_data_list(sc); |
775 | urtw_free_rx_data_list(sc); |
776 | urtw_close_pipes(sc); |
777 | |
778 | splx(s)spllower(s); |
779 | |
780 | return (0); |
781 | } |
782 | |
783 | usbd_status |
784 | urtw_close_pipes(struct urtw_softc *sc) |
785 | { |
786 | usbd_status error = 0; |
787 | |
788 | if (sc->sc_rxpipe != NULL((void *)0)) { |
789 | error = usbd_close_pipe(sc->sc_rxpipe); |
790 | if (error != 0) |
791 | goto fail; |
792 | sc->sc_rxpipe = NULL((void *)0); |
793 | } |
794 | if (sc->sc_txpipe_low != NULL((void *)0)) { |
795 | error = usbd_close_pipe(sc->sc_txpipe_low); |
796 | if (error != 0) |
797 | goto fail; |
798 | sc->sc_txpipe_low = NULL((void *)0); |
799 | } |
800 | if (sc->sc_txpipe_normal != NULL((void *)0)) { |
801 | error = usbd_close_pipe(sc->sc_txpipe_normal); |
802 | if (error != 0) |
803 | goto fail; |
804 | sc->sc_txpipe_normal = NULL((void *)0); |
805 | } |
806 | fail: |
807 | return (error); |
808 | } |
809 | |
810 | usbd_status |
811 | urtw_open_pipes(struct urtw_softc *sc) |
812 | { |
813 | usbd_status error; |
814 | |
815 | /* |
816 | * NB: there is no way to distinguish each pipes so we need to hardcode |
817 | * pipe numbers |
818 | */ |
819 | |
820 | /* tx pipe - low priority packets */ |
821 | if (sc->sc_hwrev & URTW_HWREV_81870x01) |
822 | error = usbd_open_pipe(sc->sc_iface, 0x2, |
823 | USBD_EXCLUSIVE_USE0x01, &sc->sc_txpipe_low); |
824 | else |
825 | error = usbd_open_pipe(sc->sc_iface, 0x6, |
826 | USBD_EXCLUSIVE_USE0x01, &sc->sc_txpipe_low); |
827 | if (error != 0) { |
828 | printf("%s: could not open Tx low pipe: %s\n", |
829 | sc->sc_dev.dv_xname, usbd_errstr(error)); |
830 | goto fail; |
831 | } |
832 | /* tx pipe - normal priority packets */ |
833 | if (sc->sc_hwrev & URTW_HWREV_81870x01) |
834 | error = usbd_open_pipe(sc->sc_iface, 0x3, |
835 | USBD_EXCLUSIVE_USE0x01, &sc->sc_txpipe_normal); |
836 | else |
837 | error = usbd_open_pipe(sc->sc_iface, 0x7, |
838 | USBD_EXCLUSIVE_USE0x01, &sc->sc_txpipe_normal); |
839 | if (error != 0) { |
840 | printf("%s: could not open Tx normal pipe: %s\n", |
841 | sc->sc_dev.dv_xname, usbd_errstr(error)); |
842 | goto fail; |
843 | } |
844 | /* rx pipe */ |
845 | if (sc->sc_hwrev & URTW_HWREV_81870x01) |
846 | error = usbd_open_pipe(sc->sc_iface, 0x81, |
847 | USBD_EXCLUSIVE_USE0x01, &sc->sc_rxpipe); |
848 | else |
849 | error = usbd_open_pipe(sc->sc_iface, 0x83, |
850 | USBD_EXCLUSIVE_USE0x01, &sc->sc_rxpipe); |
851 | if (error != 0) { |
852 | printf("%s: could not open Rx pipe: %s\n", |
853 | sc->sc_dev.dv_xname, usbd_errstr(error)); |
854 | goto fail; |
855 | } |
856 | |
857 | return (0); |
858 | fail: |
859 | (void)urtw_close_pipes(sc); |
860 | return (error); |
861 | } |
862 | |
863 | int |
864 | urtw_alloc_rx_data_list(struct urtw_softc *sc) |
865 | { |
866 | int i, error; |
867 | |
868 | for (i = 0; i < URTW_RX_DATA_LIST_COUNT1; i++) { |
869 | struct urtw_rx_data *data = &sc->sc_rx_data[i]; |
870 | |
871 | data->sc = sc; |
872 | |
873 | data->xfer = usbd_alloc_xfer(sc->sc_udev); |
874 | if (data->xfer == NULL((void *)0)) { |
875 | printf("%s: could not allocate rx xfer\n", |
876 | sc->sc_dev.dv_xname); |
877 | error = ENOMEM12; |
878 | goto fail; |
879 | } |
880 | |
881 | if (usbd_alloc_buffer(data->xfer, URTW_RX_MAXSIZE0x9c4) == NULL((void *)0)) { |
882 | printf("%s: could not allocate rx buffer\n", |
883 | sc->sc_dev.dv_xname); |
884 | error = ENOMEM12; |
885 | goto fail; |
886 | } |
887 | |
888 | MGETHDR(data->m, M_DONTWAIT, MT_DATA)data->m = m_gethdr((0x0002), (1)); |
889 | if (data->m == NULL((void *)0)) { |
890 | printf("%s: could not allocate rx mbuf\n", |
891 | sc->sc_dev.dv_xname); |
892 | error = ENOMEM12; |
893 | goto fail; |
894 | } |
895 | MCLGET(data->m, M_DONTWAIT)(void) m_clget((data->m), (0x0002), (1 << 11)); |
896 | if (!(data->m->m_flagsm_hdr.mh_flags & M_EXT0x0001)) { |
897 | printf("%s: could not allocate rx mbuf cluster\n", |
898 | sc->sc_dev.dv_xname); |
899 | error = ENOMEM12; |
900 | goto fail; |
901 | } |
902 | data->buf = mtod(data->m, uint8_t *)((uint8_t *)((data->m)->m_hdr.mh_data)); |
903 | } |
904 | |
905 | return (0); |
906 | |
907 | fail: |
908 | urtw_free_rx_data_list(sc); |
909 | return (error); |
910 | } |
911 | |
912 | void |
913 | urtw_free_rx_data_list(struct urtw_softc *sc) |
914 | { |
915 | int i; |
916 | |
917 | /* Make sure no transfers are pending. */ |
918 | if (sc->sc_rxpipe != NULL((void *)0)) |
919 | usbd_abort_pipe(sc->sc_rxpipe); |
920 | |
921 | for (i = 0; i < URTW_RX_DATA_LIST_COUNT1; i++) { |
922 | struct urtw_rx_data *data = &sc->sc_rx_data[i]; |
923 | |
924 | if (data->xfer != NULL((void *)0)) { |
925 | usbd_free_xfer(data->xfer); |
926 | data->xfer = NULL((void *)0); |
927 | } |
928 | if (data->m != NULL((void *)0)) { |
929 | m_freem(data->m); |
930 | data->m = NULL((void *)0); |
931 | } |
932 | } |
933 | } |
934 | |
935 | int |
936 | urtw_alloc_tx_data_list(struct urtw_softc *sc) |
937 | { |
938 | int i, error; |
939 | |
940 | for (i = 0; i < URTW_TX_DATA_LIST_COUNT16; i++) { |
941 | struct urtw_tx_data *data = &sc->sc_tx_data[i]; |
942 | |
943 | data->sc = sc; |
944 | data->ni = NULL((void *)0); |
945 | |
946 | data->xfer = usbd_alloc_xfer(sc->sc_udev); |
947 | if (data->xfer == NULL((void *)0)) { |
948 | printf("%s: could not allocate tx xfer\n", |
949 | sc->sc_dev.dv_xname); |
950 | error = ENOMEM12; |
951 | goto fail; |
952 | } |
953 | |
954 | data->buf = usbd_alloc_buffer(data->xfer, URTW_TX_MAXSIZE0x9c4); |
955 | if (data->buf == NULL((void *)0)) { |
956 | printf("%s: could not allocate tx buffer\n", |
957 | sc->sc_dev.dv_xname); |
958 | error = ENOMEM12; |
959 | goto fail; |
960 | } |
961 | |
962 | if (((unsigned long)data->buf) % 4) |
963 | printf("%s: warn: unaligned buffer %p\n", |
964 | sc->sc_dev.dv_xname, data->buf); |
965 | } |
966 | |
967 | return (0); |
968 | |
969 | fail: |
970 | urtw_free_tx_data_list(sc); |
971 | return (error); |
972 | } |
973 | |
974 | void |
975 | urtw_free_tx_data_list(struct urtw_softc *sc) |
976 | { |
977 | struct ieee80211com *ic = &sc->sc_ic; |
978 | int i; |
979 | |
980 | /* Make sure no transfers are pending. */ |
981 | if (sc->sc_txpipe_low != NULL((void *)0)) |
982 | usbd_abort_pipe(sc->sc_txpipe_low); |
983 | if (sc->sc_txpipe_normal != NULL((void *)0)) |
984 | usbd_abort_pipe(sc->sc_txpipe_normal); |
985 | |
986 | for (i = 0; i < URTW_TX_DATA_LIST_COUNT16; i++) { |
987 | struct urtw_tx_data *data = &sc->sc_tx_data[i]; |
988 | |
989 | if (data->xfer != NULL((void *)0)) { |
990 | usbd_free_xfer(data->xfer); |
991 | data->xfer = NULL((void *)0); |
992 | } |
993 | if (data->ni != NULL((void *)0)) { |
994 | ieee80211_release_node(ic, data->ni); |
995 | data->ni = NULL((void *)0); |
996 | } |
997 | } |
998 | } |
999 | |
1000 | int |
1001 | urtw_media_change(struct ifnet *ifp) |
1002 | { |
1003 | struct urtw_softc *sc = ifp->if_softc; |
1004 | int error; |
1005 | |
1006 | error = ieee80211_media_change(ifp); |
1007 | if (error != ENETRESET52) |
1008 | return (error); |
1009 | |
1010 | if ((ifp->if_flags & (IFF_UP0x1 | IFF_RUNNING0x40)) == (IFF_UP0x1 | IFF_RUNNING0x40)) |
1011 | error = sc->sc_init(ifp); |
1012 | |
1013 | return (error); |
1014 | } |
1015 | |
1016 | int |
1017 | urtw_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) |
1018 | { |
1019 | struct urtw_softc *sc = ic->ic_ific_ac.ac_if.if_softc; |
1020 | |
1021 | usb_rem_task(sc->sc_udev, &sc->sc_task); |
1022 | timeout_del(&sc->scan_to); |
1023 | |
1024 | /* do it in a process context */ |
1025 | sc->sc_state = nstate; |
1026 | sc->sc_arg = arg; |
1027 | usb_add_task(sc->sc_udev, &sc->sc_task); |
1028 | |
1029 | return (0); |
1030 | } |
1031 | |
1032 | usbd_status |
1033 | urtw_led_init(struct urtw_softc *sc) |
1034 | { |
1035 | uint32_t rev; |
1036 | usbd_status error; |
1037 | |
1038 | urtw_read8_m(sc, URTW_PSR, &sc->sc_psr)do { error = urtw_read8_c(sc, 0x005e, &sc->sc_psr, 0); if (error != 0) goto fail; } while (0); |
1039 | error = urtw_eprom_read32(sc, URTW_EPROM_SWREV0x3f, &rev); |
1040 | if (error != 0) |
1041 | goto fail; |
1042 | |
1043 | switch (rev & URTW_EPROM_CID_MASK(0xff)) { |
1044 | case URTW_EPROM_CID_ALPHA0(0x01): |
1045 | sc->sc_strategy = URTW_SW_LED_MODE11; |
1046 | break; |
1047 | case URTW_EPROM_CID_SERCOMM_PS(0x02): |
1048 | sc->sc_strategy = URTW_SW_LED_MODE33; |
1049 | break; |
1050 | case URTW_EPROM_CID_HW_LED(0x03): |
1051 | sc->sc_strategy = URTW_HW_LED4; |
1052 | break; |
1053 | case URTW_EPROM_CID_RSVD0(0x00): |
1054 | case URTW_EPROM_CID_RSVD1(0xff): |
1055 | default: |
1056 | sc->sc_strategy = URTW_SW_LED_MODE00; |
1057 | break; |
1058 | } |
1059 | |
1060 | sc->sc_gpio_ledpin = URTW_LED_PIN_GPIO00; |
1061 | |
1062 | fail: |
1063 | return (error); |
1064 | } |
1065 | |
1066 | usbd_status |
1067 | urtw_8225_write_s16(struct urtw_softc *sc, uint8_t addr, int index, |
1068 | uint16_t data) |
1069 | { |
1070 | usb_device_request_t req; |
1071 | |
1072 | req.bmRequestType = UT_WRITE_VENDOR_DEVICE(0x00 | 0x40 | 0x00); |
1073 | req.bRequest = URTW_8187_SETREGS_REQ5; |
1074 | USETW(req.wValue, addr)(*(u_int16_t *)(req.wValue) = (addr)); |
1075 | USETW(req.wIndex, index)(*(u_int16_t *)(req.wIndex) = (index)); |
1076 | USETW(req.wLength, sizeof(uint16_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint16_t))); |
1077 | |
1078 | data = htole16(data)((__uint16_t)(data)); |
1079 | return (usbd_do_request(sc->sc_udev, &req, &data)); |
1080 | } |
1081 | |
1082 | usbd_status |
1083 | urtw_8225_read(struct urtw_softc *sc, uint8_t addr, uint32_t *data) |
1084 | { |
1085 | int i; |
1086 | int16_t bit; |
1087 | uint8_t rlen = 12, wlen = 6; |
1088 | uint16_t o1, o2, o3, tmp; |
1089 | uint32_t d2w = ((uint32_t)(addr & 0x1f)) << 27; |
1090 | uint32_t mask = 0x80000000, value = 0; |
1091 | usbd_status error; |
1092 | |
1093 | urtw_read16_m(sc, URTW_RF_PINS_OUTPUT, &o1)do { error = urtw_read16_c(sc, 0x0080, &o1, 0); if (error != 0) goto fail; } while (0); |
1094 | urtw_read16_m(sc, URTW_RF_PINS_ENABLE, &o2)do { error = urtw_read16_c(sc, 0x0082, &o2, 0); if (error != 0) goto fail; } while (0); |
1095 | urtw_read16_m(sc, URTW_RF_PINS_SELECT, &o3)do { error = urtw_read16_c(sc, 0x0084, &o3, 0); if (error != 0) goto fail; } while (0); |
1096 | urtw_write16_m(sc, URTW_RF_PINS_ENABLE, o2 | 0xf)do { error = urtw_write16_c(sc, 0x0082, o2 | 0xf, 0); if (error != 0) goto fail; } while (0); |
1097 | urtw_write16_m(sc, URTW_RF_PINS_SELECT, o3 | 0xf)do { error = urtw_write16_c(sc, 0x0084, o3 | 0xf, 0); if (error != 0) goto fail; } while (0); |
1098 | o1 &= ~0xf; |
1099 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1 | URTW_BB_HOST_BANG_EN)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 2), 0 ); if (error != 0) goto fail; } while (0); |
1100 | DELAY(5)(*delay_func)(5); |
1101 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1)do { error = urtw_write16_c(sc, 0x0080, o1, 0); if (error != 0 ) goto fail; } while (0); |
1102 | DELAY(5)(*delay_func)(5); |
1103 | |
1104 | for (i = 0; i < (wlen / 2); i++, mask = mask >> 1) { |
1105 | bit = ((d2w & mask) != 0) ? 1 : 0; |
1106 | |
1107 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1)do { error = urtw_write16_c(sc, 0x0080, bit | o1, 0); if (error != 0) goto fail; } while (0); |
1108 | DELAY(2)(*delay_func)(2); |
1109 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0) |
1110 | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0); |
1111 | DELAY(2)(*delay_func)(2); |
1112 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0) |
1113 | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0); |
1114 | DELAY(2)(*delay_func)(2); |
1115 | mask = mask >> 1; |
1116 | if (i == 2) |
1117 | break; |
1118 | bit = ((d2w & mask) != 0) ? 1 : 0; |
1119 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0) |
1120 | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0); |
1121 | DELAY(2)(*delay_func)(2); |
1122 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0) |
1123 | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 1), 0); if (error != 0) goto fail; } while (0); |
1124 | DELAY(2)(*delay_func)(2); |
1125 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1)do { error = urtw_write16_c(sc, 0x0080, bit | o1, 0); if (error != 0) goto fail; } while (0); |
1126 | DELAY(1)(*delay_func)(1); |
1127 | } |
1128 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 | URTW_BB_HOST_BANG_RW |do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while ( 0) |
1129 | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while ( 0); |
1130 | DELAY(2)(*delay_func)(2); |
1131 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 | URTW_BB_HOST_BANG_RW)do { error = urtw_write16_c(sc, 0x0080, bit | o1 | (1 << 3), 0); if (error != 0) goto fail; } while (0); |
1132 | DELAY(2)(*delay_func)(2); |
1133 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1 | URTW_BB_HOST_BANG_RW)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3), 0 ); if (error != 0) goto fail; } while (0); |
1134 | DELAY(2)(*delay_func)(2); |
1135 | |
1136 | mask = 0x800; |
1137 | for (i = 0; i < rlen; i++, mask = mask >> 1) { |
1138 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3), 0 ); if (error != 0) goto fail; } while (0) |
1139 | o1 | URTW_BB_HOST_BANG_RW)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3), 0 ); if (error != 0) goto fail; } while (0); |
1140 | DELAY(2)(*delay_func)(2); |
1141 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while (0) |
1142 | o1 | URTW_BB_HOST_BANG_RW | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while (0); |
1143 | DELAY(2)(*delay_func)(2); |
1144 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while (0) |
1145 | o1 | URTW_BB_HOST_BANG_RW | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while (0); |
1146 | DELAY(2)(*delay_func)(2); |
1147 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while (0) |
1148 | o1 | URTW_BB_HOST_BANG_RW | URTW_BB_HOST_BANG_CLK)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3) | (1 << 1), 0); if (error != 0) goto fail; } while (0); |
1149 | DELAY(2)(*delay_func)(2); |
1150 | |
1151 | urtw_read16_m(sc, URTW_RF_PINS_INPUT, &tmp)do { error = urtw_read16_c(sc, 0x0086, &tmp, 0); if (error != 0) goto fail; } while (0); |
1152 | value |= ((tmp & URTW_BB_HOST_BANG_CLK(1 << 1)) ? mask : 0); |
1153 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3), 0 ); if (error != 0) goto fail; } while (0) |
1154 | o1 | URTW_BB_HOST_BANG_RW)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 3), 0 ); if (error != 0) goto fail; } while (0); |
1155 | DELAY(2)(*delay_func)(2); |
1156 | } |
1157 | |
1158 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1 | URTW_BB_HOST_BANG_EN |do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 2) | (1 << 3), 0); if (error != 0) goto fail; } while (0) |
1159 | URTW_BB_HOST_BANG_RW)do { error = urtw_write16_c(sc, 0x0080, o1 | (1 << 2) | (1 << 3), 0); if (error != 0) goto fail; } while (0); |
1160 | DELAY(2)(*delay_func)(2); |
1161 | |
1162 | urtw_write16_m(sc, URTW_RF_PINS_ENABLE, o2)do { error = urtw_write16_c(sc, 0x0082, o2, 0); if (error != 0 ) goto fail; } while (0); |
1163 | urtw_write16_m(sc, URTW_RF_PINS_SELECT, o3)do { error = urtw_write16_c(sc, 0x0084, o3, 0); if (error != 0 ) goto fail; } while (0); |
1164 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, 0x3a0)do { error = urtw_write16_c(sc, 0x0080, 0x3a0, 0); if (error != 0) goto fail; } while (0); |
1165 | |
1166 | if (data != NULL((void *)0)) |
1167 | *data = value; |
1168 | fail: |
1169 | return (error); |
1170 | } |
1171 | |
1172 | usbd_status |
1173 | urtw_8225_write_c(struct urtw_softc *sc, uint8_t addr, uint16_t data) |
1174 | { |
1175 | uint16_t d80, d82, d84; |
1176 | usbd_status error; |
1177 | |
1178 | urtw_read16_m(sc, URTW_RF_PINS_OUTPUT, &d80)do { error = urtw_read16_c(sc, 0x0080, &d80, 0); if (error != 0) goto fail; } while (0); |
1179 | d80 &= 0xfff3; |
1180 | urtw_read16_m(sc, URTW_RF_PINS_ENABLE, &d82)do { error = urtw_read16_c(sc, 0x0082, &d82, 0); if (error != 0) goto fail; } while (0); |
1181 | urtw_read16_m(sc, URTW_RF_PINS_SELECT, &d84)do { error = urtw_read16_c(sc, 0x0084, &d84, 0); if (error != 0) goto fail; } while (0); |
1182 | d84 &= 0xfff0; |
1183 | urtw_write16_m(sc, URTW_RF_PINS_ENABLE, d82 | 0x0007)do { error = urtw_write16_c(sc, 0x0082, d82 | 0x0007, 0); if ( error != 0) goto fail; } while (0); |
1184 | urtw_write16_m(sc, URTW_RF_PINS_SELECT, d84 | 0x0007)do { error = urtw_write16_c(sc, 0x0084, d84 | 0x0007, 0); if ( error != 0) goto fail; } while (0); |
1185 | DELAY(10)(*delay_func)(10); |
1186 | |
1187 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80 | URTW_BB_HOST_BANG_EN)do { error = urtw_write16_c(sc, 0x0080, d80 | (1 << 2), 0); if (error != 0) goto fail; } while (0); |
1188 | DELAY(2)(*delay_func)(2); |
1189 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80)do { error = urtw_write16_c(sc, 0x0080, d80, 0); if (error != 0) goto fail; } while (0); |
1190 | DELAY(10)(*delay_func)(10); |
1191 | |
1192 | error = urtw_8225_write_s16(sc, addr, 0x8225, data); |
1193 | if (error != 0) |
1194 | goto fail; |
1195 | |
1196 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80 | URTW_BB_HOST_BANG_EN)do { error = urtw_write16_c(sc, 0x0080, d80 | (1 << 2), 0); if (error != 0) goto fail; } while (0); |
1197 | DELAY(10)(*delay_func)(10); |
1198 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80 | URTW_BB_HOST_BANG_EN)do { error = urtw_write16_c(sc, 0x0080, d80 | (1 << 2), 0); if (error != 0) goto fail; } while (0); |
1199 | urtw_write16_m(sc, URTW_RF_PINS_SELECT, d84)do { error = urtw_write16_c(sc, 0x0084, d84, 0); if (error != 0) goto fail; } while (0); |
1200 | usbd_delay_ms(sc->sc_udev, 2); |
1201 | fail: |
1202 | return (error); |
1203 | } |
1204 | |
1205 | usbd_status |
1206 | urtw_8225_isv2(struct urtw_softc *sc, int *ret) |
1207 | { |
1208 | uint32_t data; |
1209 | usbd_status error; |
1210 | |
1211 | *ret = 1; |
1212 | |
1213 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, 0x0080)do { error = urtw_write16_c(sc, 0x0080, 0x0080, 0); if (error != 0) goto fail; } while (0); |
1214 | urtw_write16_m(sc, URTW_RF_PINS_SELECT, 0x0080)do { error = urtw_write16_c(sc, 0x0084, 0x0080, 0); if (error != 0) goto fail; } while (0); |
1215 | urtw_write16_m(sc, URTW_RF_PINS_ENABLE, 0x0080)do { error = urtw_write16_c(sc, 0x0082, 0x0080, 0); if (error != 0) goto fail; } while (0); |
1216 | usbd_delay_ms(sc->sc_udev, 500); |
1217 | |
1218 | urtw_8225_write(sc, 0x0, 0x1b7)do { error = urtw_8225_write_c(sc, 0x0, 0x1b7); if (error != 0 ) goto fail; } while (0); |
1219 | |
1220 | error = urtw_8225_read(sc, 0x8, &data); |
1221 | if (error != 0) |
1222 | goto fail; |
1223 | if (data != 0x588) |
1224 | *ret = 0; |
1225 | else { |
1226 | error = urtw_8225_read(sc, 0x9, &data); |
1227 | if (error != 0) |
1228 | goto fail; |
1229 | if (data != 0x700) |
1230 | *ret = 0; |
1231 | } |
1232 | |
1233 | urtw_8225_write(sc, 0x0, 0xb7)do { error = urtw_8225_write_c(sc, 0x0, 0xb7); if (error != 0 ) goto fail; } while (0); |
1234 | fail: |
1235 | return (error); |
1236 | } |
1237 | |
1238 | usbd_status |
1239 | urtw_get_rfchip(struct urtw_softc *sc) |
1240 | { |
1241 | struct urtw_rf *rf = &sc->sc_rf; |
1242 | int ret; |
1243 | uint32_t data; |
1244 | usbd_status error; |
1245 | |
1246 | rf->rf_sc = sc; |
1247 | |
1248 | if (sc->sc_hwrev & URTW_HWREV_81870x01) { |
1249 | error = urtw_eprom_read32(sc, URTW_EPROM_RFCHIPID0x06, &data); |
1250 | if (error != 0) |
1251 | goto fail; |
1252 | switch (data & 0xff) { |
1253 | case URTW_EPROM_RFCHIPID_RTL8225U(5): |
1254 | error = urtw_8225_isv2(sc, &ret); |
1255 | if (error != 0) |
1256 | goto fail; |
1257 | if (ret == 0) { |
1258 | rf->init = urtw_8225_rf_init; |
1259 | rf->set_chan = urtw_8225_rf_set_chan; |
1260 | rf->set_sens = urtw_8225_rf_set_sens; |
1261 | printf(", RFv1"); |
1262 | } else { |
1263 | rf->init = urtw_8225v2_rf_init; |
1264 | rf->set_chan = urtw_8225v2_rf_set_chan; |
1265 | rf->set_sens = NULL((void *)0); |
1266 | printf(", RFv2"); |
1267 | } |
1268 | break; |
1269 | default: |
1270 | goto fail; |
1271 | } |
1272 | } else { |
1273 | rf->init = urtw_8225v2_b_rf_init; |
1274 | rf->set_chan = urtw_8225v2_b_rf_set_chan; |
1275 | rf->set_sens = NULL((void *)0); |
1276 | } |
1277 | |
1278 | rf->max_sens = URTW_8225_RF_MAX_SENS6; |
1279 | rf->sens = URTW_8225_RF_DEF_SENS4; |
1280 | |
1281 | return (0); |
1282 | |
1283 | fail: |
1284 | printf("unsupported RF chip %d", data & 0xff); |
1285 | return (error); |
1286 | } |
1287 | |
1288 | usbd_status |
1289 | urtw_get_txpwr(struct urtw_softc *sc) |
1290 | { |
1291 | int i, j; |
1292 | uint32_t data; |
1293 | usbd_status error; |
1294 | |
1295 | error = urtw_eprom_read32(sc, URTW_EPROM_TXPW_BASE0x05, &data); |
1296 | if (error != 0) |
1297 | goto fail; |
1298 | sc->sc_txpwr_cck_base = data & 0xf; |
1299 | sc->sc_txpwr_ofdm_base = (data >> 4) & 0xf; |
1300 | |
1301 | for (i = 1, j = 0; i < 6; i += 2, j++) { |
1302 | error = urtw_eprom_read32(sc, URTW_EPROM_TXPW00x16 + j, &data); |
1303 | if (error != 0) |
1304 | goto fail; |
1305 | sc->sc_txpwr_cck[i] = data & 0xf; |
1306 | sc->sc_txpwr_cck[i + 1] = (data & 0xf00) >> 8; |
1307 | sc->sc_txpwr_ofdm[i] = (data & 0xf0) >> 4; |
1308 | sc->sc_txpwr_ofdm[i + 1] = (data & 0xf000) >> 12; |
1309 | } |
1310 | for (i = 1, j = 0; i < 4; i += 2, j++) { |
1311 | error = urtw_eprom_read32(sc, URTW_EPROM_TXPW10x3d + j, &data); |
1312 | if (error != 0) |
1313 | goto fail; |
1314 | sc->sc_txpwr_cck[i + 6] = data & 0xf; |
1315 | sc->sc_txpwr_cck[i + 6 + 1] = (data & 0xf00) >> 8; |
1316 | sc->sc_txpwr_ofdm[i + 6] = (data & 0xf0) >> 4; |
1317 | sc->sc_txpwr_ofdm[i + 6 + 1] = (data & 0xf000) >> 12; |
1318 | } |
1319 | if (sc->sc_hwrev & URTW_HWREV_81870x01) { |
1320 | for (i = 1, j = 0; i < 4; i += 2, j++) { |
1321 | error = urtw_eprom_read32(sc, URTW_EPROM_TXPW20x1b + j, |
1322 | &data); |
1323 | if (error != 0) |
1324 | goto fail; |
1325 | sc->sc_txpwr_cck[i + 6 + 4] = data & 0xf; |
1326 | sc->sc_txpwr_cck[i + 6 + 4 + 1] = (data & 0xf00) >> 8; |
1327 | sc->sc_txpwr_ofdm[i + 6 + 4] = (data & 0xf0) >> 4; |
1328 | sc->sc_txpwr_ofdm[i + 6 + 4 + 1] = |
1329 | (data & 0xf000) >> 12; |
1330 | } |
1331 | } else { |
1332 | /* Channel 11. */ |
1333 | error = urtw_eprom_read32(sc, 0x1b, &data); |
1334 | if (error != 0) |
1335 | goto fail; |
1336 | sc->sc_txpwr_cck[11] = data & 0xf; |
1337 | sc->sc_txpwr_ofdm[11] = (data & 0xf0) >> 4; |
1338 | |
1339 | /* Channel 12. */ |
1340 | error = urtw_eprom_read32(sc, 0xa, &data); |
1341 | if (error != 0) |
1342 | goto fail; |
1343 | sc->sc_txpwr_cck[12] = data & 0xf; |
1344 | sc->sc_txpwr_ofdm[12] = (data & 0xf0) >> 4; |
1345 | |
1346 | /* Channel 13, 14. */ |
1347 | error = urtw_eprom_read32(sc, 0x1c, &data); |
1348 | if (error != 0) |
1349 | goto fail; |
1350 | sc->sc_txpwr_cck[13] = data & 0xf; |
1351 | sc->sc_txpwr_ofdm[13] = (data & 0xf0) >> 4; |
1352 | sc->sc_txpwr_cck[14] = (data & 0xf00) >> 8; |
1353 | sc->sc_txpwr_ofdm[14] = (data & 0xf000) >> 12; |
1354 | } |
1355 | fail: |
1356 | return (error); |
1357 | } |
1358 | |
1359 | usbd_status |
1360 | urtw_get_macaddr(struct urtw_softc *sc) |
1361 | { |
1362 | struct ieee80211com *ic = &sc->sc_ic; |
1363 | usbd_status error; |
1364 | uint32_t data; |
1365 | |
1366 | error = urtw_eprom_read32(sc, URTW_EPROM_MACADDR0x07, &data); |
1367 | if (error != 0) |
1368 | goto fail; |
1369 | ic->ic_myaddr[0] = data & 0xff; |
1370 | ic->ic_myaddr[1] = (data & 0xff00) >> 8; |
1371 | error = urtw_eprom_read32(sc, URTW_EPROM_MACADDR0x07 + 1, &data); |
1372 | if (error != 0) |
1373 | goto fail; |
1374 | ic->ic_myaddr[2] = data & 0xff; |
1375 | ic->ic_myaddr[3] = (data & 0xff00) >> 8; |
1376 | error = urtw_eprom_read32(sc, URTW_EPROM_MACADDR0x07 + 2, &data); |
1377 | if (error != 0) |
1378 | goto fail; |
1379 | ic->ic_myaddr[4] = data & 0xff; |
1380 | ic->ic_myaddr[5] = (data & 0xff00) >> 8; |
1381 | fail: |
1382 | return (error); |
1383 | } |
1384 | |
1385 | usbd_status |
1386 | urtw_eprom_read32(struct urtw_softc *sc, uint32_t addr, uint32_t *data) |
1387 | { |
1388 | #define URTW_READCMD_LEN 3 |
1389 | int addrlen, i; |
1390 | int16_t addrstr[8], data16, readcmd[] = { 1, 1, 0 }; |
1391 | usbd_status error; |
1392 | |
1393 | /* NB: make sure the buffer is initialized */ |
1394 | *data = 0; |
1395 | |
1396 | /* enable EPROM programming */ |
1397 | urtw_write8_m(sc, URTW_EPROM_CMD, URTW_EPROM_CMD_PROGRAM_MODE)do { error = urtw_write8_c(sc, 0x0050, ((0x2) << (6)), 0 ); if (error != 0) goto fail; } while (0); |
1398 | DELAY(URTW_EPROM_DELAY)(*delay_func)(10); |
1399 | |
1400 | error = urtw_eprom_cs(sc, URTW_EPROM_ENABLE1); |
1401 | if (error != 0) |
1402 | goto fail; |
1403 | error = urtw_eprom_ck(sc); |
1404 | if (error != 0) |
1405 | goto fail; |
1406 | error = urtw_eprom_sendbits(sc, readcmd, URTW_READCMD_LEN); |
1407 | if (error != 0) |
1408 | goto fail; |
1409 | if (sc->sc_epromtype == URTW_EEPROM_93C561) { |
1410 | addrlen = 8; |
1411 | addrstr[0] = addr & (1 << 7); |
1412 | addrstr[1] = addr & (1 << 6); |
1413 | addrstr[2] = addr & (1 << 5); |
1414 | addrstr[3] = addr & (1 << 4); |
1415 | addrstr[4] = addr & (1 << 3); |
1416 | addrstr[5] = addr & (1 << 2); |
1417 | addrstr[6] = addr & (1 << 1); |
1418 | addrstr[7] = addr & (1 << 0); |
1419 | } else { |
1420 | addrlen=6; |
1421 | addrstr[0] = addr & (1 << 5); |
1422 | addrstr[1] = addr & (1 << 4); |
1423 | addrstr[2] = addr & (1 << 3); |
1424 | addrstr[3] = addr & (1 << 2); |
1425 | addrstr[4] = addr & (1 << 1); |
1426 | addrstr[5] = addr & (1 << 0); |
1427 | } |
1428 | error = urtw_eprom_sendbits(sc, addrstr, addrlen); |
1429 | if (error != 0) |
1430 | goto fail; |
1431 | |
1432 | error = urtw_eprom_writebit(sc, 0); |
1433 | if (error != 0) |
1434 | goto fail; |
1435 | |
1436 | for (i = 0; i < 16; i++) { |
1437 | error = urtw_eprom_ck(sc); |
1438 | if (error != 0) |
1439 | goto fail; |
1440 | error = urtw_eprom_readbit(sc, &data16); |
1441 | if (error != 0) |
1442 | goto fail; |
1443 | |
1444 | (*data) |= (data16 << (15 - i)); |
1445 | } |
1446 | |
1447 | error = urtw_eprom_cs(sc, URTW_EPROM_DISABLE0); |
1448 | if (error != 0) |
1449 | goto fail; |
1450 | error = urtw_eprom_ck(sc); |
1451 | if (error != 0) |
1452 | goto fail; |
1453 | |
1454 | /* now disable EPROM programming */ |
1455 | urtw_write8_m(sc, URTW_EPROM_CMD, URTW_EPROM_CMD_NORMAL_MODE)do { error = urtw_write8_c(sc, 0x0050, ((0x0) << (6)), 0 ); if (error != 0) goto fail; } while (0); |
1456 | fail: |
1457 | return (error); |
1458 | #undef URTW_READCMD_LEN |
1459 | } |
1460 | |
1461 | usbd_status |
1462 | urtw_eprom_readbit(struct urtw_softc *sc, int16_t *data) |
1463 | { |
1464 | uint8_t data8; |
1465 | usbd_status error; |
1466 | |
1467 | urtw_read8_m(sc, URTW_EPROM_CMD, &data8)do { error = urtw_read8_c(sc, 0x0050, &data8, 0); if (error != 0) goto fail; } while (0); |
1468 | *data = (data8 & URTW_EPROM_READBIT(0x1)) ? 1 : 0; |
1469 | DELAY(URTW_EPROM_DELAY)(*delay_func)(10); |
1470 | |
1471 | fail: |
1472 | return (error); |
1473 | } |
1474 | |
1475 | usbd_status |
1476 | urtw_eprom_sendbits(struct urtw_softc *sc, int16_t *buf, int buflen) |
1477 | { |
1478 | int i = 0; |
1479 | usbd_status error = 0; |
1480 | |
1481 | for (i = 0; i < buflen; i++) { |
1482 | error = urtw_eprom_writebit(sc, buf[i]); |
1483 | if (error != 0) |
1484 | goto fail; |
1485 | error = urtw_eprom_ck(sc); |
1486 | if (error != 0) |
1487 | goto fail; |
1488 | } |
1489 | fail: |
1490 | return (error); |
1491 | } |
1492 | |
1493 | usbd_status |
1494 | urtw_eprom_writebit(struct urtw_softc *sc, int16_t bit) |
1495 | { |
1496 | uint8_t data; |
1497 | usbd_status error; |
1498 | |
1499 | urtw_read8_m(sc, URTW_EPROM_CMD, &data)do { error = urtw_read8_c(sc, 0x0050, &data, 0); if (error != 0) goto fail; } while (0); |
1500 | if (bit != 0) |
1501 | urtw_write8_m(sc, URTW_EPROM_CMD, data | URTW_EPROM_WRITEBIT)do { error = urtw_write8_c(sc, 0x0050, data | (0x2), 0); if ( error != 0) goto fail; } while (0); |
1502 | else |
1503 | urtw_write8_m(sc, URTW_EPROM_CMD, data & ~URTW_EPROM_WRITEBIT)do { error = urtw_write8_c(sc, 0x0050, data & ~(0x2), 0); if (error != 0) goto fail; } while (0); |
1504 | DELAY(URTW_EPROM_DELAY)(*delay_func)(10); |
1505 | fail: |
1506 | return (error); |
1507 | } |
1508 | |
1509 | usbd_status |
1510 | urtw_eprom_ck(struct urtw_softc *sc) |
1511 | { |
1512 | uint8_t data; |
1513 | usbd_status error; |
1514 | |
1515 | /* masking */ |
1516 | urtw_read8_m(sc, URTW_EPROM_CMD, &data)do { error = urtw_read8_c(sc, 0x0050, &data, 0); if (error != 0) goto fail; } while (0); |
1517 | urtw_write8_m(sc, URTW_EPROM_CMD, data | URTW_EPROM_CK)do { error = urtw_write8_c(sc, 0x0050, data | (0x4), 0); if ( error != 0) goto fail; } while (0); |
1518 | DELAY(URTW_EPROM_DELAY)(*delay_func)(10); |
1519 | /* unmasking */ |
1520 | urtw_read8_m(sc, URTW_EPROM_CMD, &data)do { error = urtw_read8_c(sc, 0x0050, &data, 0); if (error != 0) goto fail; } while (0); |
1521 | urtw_write8_m(sc, URTW_EPROM_CMD, data & ~URTW_EPROM_CK)do { error = urtw_write8_c(sc, 0x0050, data & ~(0x4), 0); if (error != 0) goto fail; } while (0); |
1522 | DELAY(URTW_EPROM_DELAY)(*delay_func)(10); |
1523 | fail: |
1524 | return (error); |
1525 | } |
1526 | |
1527 | usbd_status |
1528 | urtw_eprom_cs(struct urtw_softc *sc, int able) |
1529 | { |
1530 | uint8_t data; |
1531 | usbd_status error; |
1532 | |
1533 | urtw_read8_m(sc, URTW_EPROM_CMD, &data)do { error = urtw_read8_c(sc, 0x0050, &data, 0); if (error != 0) goto fail; } while (0); |
1534 | if (able == URTW_EPROM_ENABLE1) |
1535 | urtw_write8_m(sc, URTW_EPROM_CMD, data | URTW_EPROM_CS)do { error = urtw_write8_c(sc, 0x0050, data | (0x8), 0); if ( error != 0) goto fail; } while (0); |
1536 | else |
1537 | urtw_write8_m(sc, URTW_EPROM_CMD, data & ~URTW_EPROM_CS)do { error = urtw_write8_c(sc, 0x0050, data & ~(0x8), 0); if (error != 0) goto fail; } while (0); |
1538 | DELAY(URTW_EPROM_DELAY)(*delay_func)(10); |
1539 | fail: |
1540 | return (error); |
1541 | } |
1542 | |
1543 | usbd_status |
1544 | urtw_read8_c(struct urtw_softc *sc, int val, uint8_t *data, uint8_t idx) |
1545 | { |
1546 | usb_device_request_t req; |
1547 | usbd_status error; |
1548 | |
1549 | req.bmRequestType = UT_READ_VENDOR_DEVICE(0x80 | 0x40 | 0x00); |
1550 | req.bRequest = URTW_8187_GETREGS_REQ5; |
1551 | USETW(req.wValue, val | 0xff00)(*(u_int16_t *)(req.wValue) = (val | 0xff00)); |
1552 | USETW(req.wIndex, idx & 0x03)(*(u_int16_t *)(req.wIndex) = (idx & 0x03)); |
1553 | USETW(req.wLength, sizeof(uint8_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint8_t))); |
1554 | |
1555 | error = usbd_do_request(sc->sc_udev, &req, data); |
1556 | return (error); |
1557 | } |
1558 | |
1559 | usbd_status |
1560 | urtw_read8e(struct urtw_softc *sc, int val, uint8_t *data) |
1561 | { |
1562 | usb_device_request_t req; |
1563 | usbd_status error; |
1564 | |
1565 | req.bmRequestType = UT_READ_VENDOR_DEVICE(0x80 | 0x40 | 0x00); |
1566 | req.bRequest = URTW_8187_GETREGS_REQ5; |
1567 | USETW(req.wValue, val | 0xfe00)(*(u_int16_t *)(req.wValue) = (val | 0xfe00)); |
1568 | USETW(req.wIndex, 0)(*(u_int16_t *)(req.wIndex) = (0)); |
1569 | USETW(req.wLength, sizeof(uint8_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint8_t))); |
1570 | |
1571 | error = usbd_do_request(sc->sc_udev, &req, data); |
1572 | return (error); |
1573 | } |
1574 | |
1575 | usbd_status |
1576 | urtw_read16_c(struct urtw_softc *sc, int val, uint16_t *data, uint8_t idx) |
1577 | { |
1578 | usb_device_request_t req; |
1579 | usbd_status error; |
1580 | |
1581 | req.bmRequestType = UT_READ_VENDOR_DEVICE(0x80 | 0x40 | 0x00); |
1582 | req.bRequest = URTW_8187_GETREGS_REQ5; |
1583 | USETW(req.wValue, val | 0xff00)(*(u_int16_t *)(req.wValue) = (val | 0xff00)); |
1584 | USETW(req.wIndex, idx & 0x03)(*(u_int16_t *)(req.wIndex) = (idx & 0x03)); |
1585 | USETW(req.wLength, sizeof(uint16_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint16_t))); |
1586 | |
1587 | error = usbd_do_request(sc->sc_udev, &req, data); |
1588 | *data = letoh16(*data)((__uint16_t)(*data)); |
1589 | return (error); |
1590 | } |
1591 | |
1592 | usbd_status |
1593 | urtw_read32_c(struct urtw_softc *sc, int val, uint32_t *data, uint8_t idx) |
1594 | { |
1595 | usb_device_request_t req; |
1596 | usbd_status error; |
1597 | |
1598 | req.bmRequestType = UT_READ_VENDOR_DEVICE(0x80 | 0x40 | 0x00); |
1599 | req.bRequest = URTW_8187_GETREGS_REQ5; |
1600 | USETW(req.wValue, val | 0xff00)(*(u_int16_t *)(req.wValue) = (val | 0xff00)); |
1601 | USETW(req.wIndex, idx & 0x03)(*(u_int16_t *)(req.wIndex) = (idx & 0x03)); |
1602 | USETW(req.wLength, sizeof(uint32_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint32_t))); |
1603 | |
1604 | error = usbd_do_request(sc->sc_udev, &req, data); |
1605 | *data = letoh32(*data)((__uint32_t)(*data)); |
1606 | return (error); |
1607 | } |
1608 | |
1609 | usbd_status |
1610 | urtw_write8_c(struct urtw_softc *sc, int val, uint8_t data, uint8_t idx) |
1611 | { |
1612 | usb_device_request_t req; |
1613 | |
1614 | req.bmRequestType = UT_WRITE_VENDOR_DEVICE(0x00 | 0x40 | 0x00); |
1615 | req.bRequest = URTW_8187_SETREGS_REQ5; |
1616 | USETW(req.wValue, val | 0xff00)(*(u_int16_t *)(req.wValue) = (val | 0xff00)); |
1617 | USETW(req.wIndex, idx & 0x03)(*(u_int16_t *)(req.wIndex) = (idx & 0x03)); |
1618 | USETW(req.wLength, sizeof(uint8_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint8_t))); |
1619 | |
1620 | return (usbd_do_request(sc->sc_udev, &req, &data)); |
1621 | } |
1622 | |
1623 | usbd_status |
1624 | urtw_write8e(struct urtw_softc *sc, int val, uint8_t data) |
1625 | { |
1626 | usb_device_request_t req; |
1627 | |
1628 | req.bmRequestType = UT_WRITE_VENDOR_DEVICE(0x00 | 0x40 | 0x00); |
1629 | req.bRequest = URTW_8187_SETREGS_REQ5; |
1630 | USETW(req.wValue, val | 0xfe00)(*(u_int16_t *)(req.wValue) = (val | 0xfe00)); |
1631 | USETW(req.wIndex, 0)(*(u_int16_t *)(req.wIndex) = (0)); |
1632 | USETW(req.wLength, sizeof(uint8_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint8_t))); |
1633 | |
1634 | return (usbd_do_request(sc->sc_udev, &req, &data)); |
1635 | } |
1636 | |
1637 | usbd_status |
1638 | urtw_write16_c(struct urtw_softc *sc, int val, uint16_t data, uint8_t idx) |
1639 | { |
1640 | usb_device_request_t req; |
1641 | |
1642 | req.bmRequestType = UT_WRITE_VENDOR_DEVICE(0x00 | 0x40 | 0x00); |
1643 | req.bRequest = URTW_8187_SETREGS_REQ5; |
1644 | USETW(req.wValue, val | 0xff00)(*(u_int16_t *)(req.wValue) = (val | 0xff00)); |
1645 | USETW(req.wIndex, idx & 0x03)(*(u_int16_t *)(req.wIndex) = (idx & 0x03)); |
1646 | USETW(req.wLength, sizeof(uint16_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint16_t))); |
1647 | |
1648 | data = htole16(data)((__uint16_t)(data)); |
1649 | return (usbd_do_request(sc->sc_udev, &req, &data)); |
1650 | } |
1651 | |
1652 | usbd_status |
1653 | urtw_write32_c(struct urtw_softc *sc, int val, uint32_t data, uint8_t idx) |
1654 | { |
1655 | usb_device_request_t req; |
1656 | |
1657 | req.bmRequestType = UT_WRITE_VENDOR_DEVICE(0x00 | 0x40 | 0x00); |
1658 | req.bRequest = URTW_8187_SETREGS_REQ5; |
1659 | USETW(req.wValue, val | 0xff00)(*(u_int16_t *)(req.wValue) = (val | 0xff00)); |
1660 | USETW(req.wIndex, idx & 0x03)(*(u_int16_t *)(req.wIndex) = (idx & 0x03)); |
1661 | USETW(req.wLength, sizeof(uint32_t))(*(u_int16_t *)(req.wLength) = (sizeof(uint32_t))); |
1662 | |
1663 | data = htole32(data)((__uint32_t)(data)); |
1664 | return (usbd_do_request(sc->sc_udev, &req, &data)); |
1665 | } |
1666 | |
1667 | static usbd_status |
1668 | urtw_set_mode(struct urtw_softc *sc, uint32_t mode) |
1669 | { |
1670 | uint8_t data; |
1671 | usbd_status error; |
1672 | |
1673 | urtw_read8_m(sc, URTW_EPROM_CMD, &data)do { error = urtw_read8_c(sc, 0x0050, &data, 0); if (error != 0) goto fail; } while (0); |
1674 | data = (data & ~URTW_EPROM_CMD_MASK((1 << 7) | (1 << 6))) | (mode << URTW_EPROM_CMD_SHIFT(6)); |
1675 | data = data & ~(URTW_EPROM_CS(0x8) | URTW_EPROM_CK(0x4)); |
1676 | urtw_write8_m(sc, URTW_EPROM_CMD, data)do { error = urtw_write8_c(sc, 0x0050, data, 0); if (error != 0) goto fail; } while (0); |
1677 | fail: |
1678 | return (error); |
1679 | } |
1680 | |
1681 | usbd_status |
1682 | urtw_8180_set_anaparam(struct urtw_softc *sc, uint32_t val) |
1683 | { |
1684 | uint8_t data; |
1685 | usbd_status error; |
1686 | |
1687 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
1688 | if (error) |
1689 | goto fail; |
1690 | |
1691 | urtw_read8_m(sc, URTW_CONFIG3, &data)do { error = urtw_read8_c(sc, 0x0059, &data, 0); if (error != 0) goto fail; } while (0); |
1692 | urtw_write8_m(sc, URTW_CONFIG3, data | URTW_CONFIG3_ANAPARAM_WRITE)do { error = urtw_write8_c(sc, 0x0059, data | (0x40), 0); if ( error != 0) goto fail; } while (0); |
1693 | urtw_write32_m(sc, URTW_ANAPARAM, val)do { error = urtw_write32_c(sc, 0x0054, val, 0); if (error != 0) goto fail; } while (0); |
1694 | urtw_read8_m(sc, URTW_CONFIG3, &data)do { error = urtw_read8_c(sc, 0x0059, &data, 0); if (error != 0) goto fail; } while (0); |
1695 | urtw_write8_m(sc, URTW_CONFIG3, data & ~URTW_CONFIG3_ANAPARAM_WRITE)do { error = urtw_write8_c(sc, 0x0059, data & ~(0x40), 0) ; if (error != 0) goto fail; } while (0); |
1696 | |
1697 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
1698 | if (error) |
1699 | goto fail; |
1700 | fail: |
1701 | return (error); |
1702 | } |
1703 | |
1704 | usbd_status |
1705 | urtw_8185_set_anaparam2(struct urtw_softc *sc, uint32_t val) |
1706 | { |
1707 | uint8_t data; |
1708 | usbd_status error; |
1709 | |
1710 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
1711 | if (error) |
1712 | goto fail; |
1713 | |
1714 | urtw_read8_m(sc, URTW_CONFIG3, &data)do { error = urtw_read8_c(sc, 0x0059, &data, 0); if (error != 0) goto fail; } while (0); |
1715 | urtw_write8_m(sc, URTW_CONFIG3, data | URTW_CONFIG3_ANAPARAM_WRITE)do { error = urtw_write8_c(sc, 0x0059, data | (0x40), 0); if ( error != 0) goto fail; } while (0); |
1716 | urtw_write32_m(sc, URTW_ANAPARAM2, val)do { error = urtw_write32_c(sc, 0x0060, val, 0); if (error != 0) goto fail; } while (0); |
1717 | urtw_read8_m(sc, URTW_CONFIG3, &data)do { error = urtw_read8_c(sc, 0x0059, &data, 0); if (error != 0) goto fail; } while (0); |
1718 | urtw_write8_m(sc, URTW_CONFIG3, data & ~URTW_CONFIG3_ANAPARAM_WRITE)do { error = urtw_write8_c(sc, 0x0059, data & ~(0x40), 0) ; if (error != 0) goto fail; } while (0); |
1719 | |
1720 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
1721 | if (error) |
1722 | goto fail; |
1723 | fail: |
1724 | return (error); |
1725 | } |
1726 | |
1727 | usbd_status |
1728 | urtw_intr_disable(struct urtw_softc *sc) |
1729 | { |
1730 | usbd_status error; |
1731 | |
1732 | urtw_write16_m(sc, URTW_INTR_MASK, 0)do { error = urtw_write16_c(sc, 0x003c, 0, 0); if (error != 0 ) goto fail; } while (0); |
1733 | fail: |
1734 | return (error); |
1735 | } |
1736 | |
1737 | usbd_status |
1738 | urtw_reset(struct urtw_softc *sc) |
1739 | { |
1740 | uint8_t data; |
1741 | usbd_status error; |
1742 | |
1743 | error = urtw_8180_set_anaparam(sc, URTW_8187_8225_ANAPARAM_ON(0xa0000a59)); |
1744 | if (error) |
1745 | goto fail; |
1746 | error = urtw_8185_set_anaparam2(sc, URTW_8187_8225_ANAPARAM2_ON(0x860c7312)); |
1747 | if (error) |
1748 | goto fail; |
1749 | |
1750 | error = urtw_intr_disable(sc); |
1751 | if (error) |
1752 | goto fail; |
1753 | usbd_delay_ms(sc->sc_udev, 100); |
1754 | |
1755 | error = urtw_write8e(sc, 0x18, 0x10); |
1756 | if (error != 0) |
1757 | goto fail; |
1758 | error = urtw_write8e(sc, 0x18, 0x11); |
1759 | if (error != 0) |
1760 | goto fail; |
1761 | error = urtw_write8e(sc, 0x18, 0x00); |
1762 | if (error != 0) |
1763 | goto fail; |
1764 | usbd_delay_ms(sc->sc_udev, 100); |
1765 | |
1766 | urtw_read8_m(sc, URTW_CMD, &data)do { error = urtw_read8_c(sc, 0x0037, &data, 0); if (error != 0) goto fail; } while (0); |
1767 | data = (data & 2) | URTW_CMD_RST(0x10); |
1768 | urtw_write8_m(sc, URTW_CMD, data)do { error = urtw_write8_c(sc, 0x0037, data, 0); if (error != 0) goto fail; } while (0); |
1769 | usbd_delay_ms(sc->sc_udev, 100); |
1770 | |
1771 | urtw_read8_m(sc, URTW_CMD, &data)do { error = urtw_read8_c(sc, 0x0037, &data, 0); if (error != 0) goto fail; } while (0); |
1772 | if (data & URTW_CMD_RST(0x10)) { |
1773 | printf("%s: reset timeout\n", sc->sc_dev.dv_xname); |
1774 | goto fail; |
1775 | } |
1776 | |
1777 | error = urtw_set_mode(sc, URTW_EPROM_CMD_LOAD(0x1)); |
1778 | if (error) |
1779 | goto fail; |
1780 | usbd_delay_ms(sc->sc_udev, 100); |
1781 | |
1782 | error = urtw_8180_set_anaparam(sc, URTW_8187_8225_ANAPARAM_ON(0xa0000a59)); |
1783 | if (error) |
1784 | goto fail; |
1785 | error = urtw_8185_set_anaparam2(sc, URTW_8187_8225_ANAPARAM2_ON(0x860c7312)); |
1786 | if (error) |
1787 | goto fail; |
1788 | fail: |
1789 | return (error); |
1790 | } |
1791 | |
1792 | usbd_status |
1793 | urtw_led_on(struct urtw_softc *sc, int type) |
1794 | { |
1795 | usbd_status error = 0; |
1796 | |
1797 | if (type == URTW_LED_GPIO1) { |
1798 | switch (sc->sc_gpio_ledpin) { |
1799 | case URTW_LED_PIN_GPIO00: |
1800 | urtw_write8_m(sc, URTW_GPIO, 0x01)do { error = urtw_write8_c(sc, 0x0091, 0x01, 0); if (error != 0) goto fail; } while (0); |
1801 | urtw_write8_m(sc, URTW_GP_ENABLE, 0x00)do { error = urtw_write8_c(sc, 0x0090, 0x00, 0); if (error != 0) goto fail; } while (0); |
1802 | break; |
1803 | default: |
1804 | break; |
1805 | } |
1806 | } |
1807 | |
1808 | sc->sc_gpio_ledon = 1; |
1809 | fail: |
1810 | return (error); |
1811 | } |
1812 | |
1813 | static usbd_status |
1814 | urtw_led_off(struct urtw_softc *sc, int type) |
1815 | { |
1816 | usbd_status error = 0; |
1817 | |
1818 | if (type == URTW_LED_GPIO1) { |
1819 | switch (sc->sc_gpio_ledpin) { |
1820 | case URTW_LED_PIN_GPIO00: |
1821 | urtw_write8_m(sc, URTW_GPIO, 0x01)do { error = urtw_write8_c(sc, 0x0091, 0x01, 0); if (error != 0) goto fail; } while (0); |
1822 | urtw_write8_m(sc, URTW_GP_ENABLE, 0x01)do { error = urtw_write8_c(sc, 0x0090, 0x01, 0); if (error != 0) goto fail; } while (0); |
1823 | break; |
1824 | default: |
1825 | break; |
1826 | } |
1827 | } |
1828 | |
1829 | sc->sc_gpio_ledon = 0; |
1830 | |
1831 | fail: |
1832 | return (error); |
1833 | } |
1834 | |
1835 | usbd_status |
1836 | urtw_led_mode0(struct urtw_softc *sc, int mode) |
1837 | { |
1838 | switch (mode) { |
1839 | case URTW_LED_CTL_POWER_ON0: |
1840 | sc->sc_gpio_ledstate = URTW_LED_POWER_ON_BLINK5; |
1841 | break; |
1842 | case URTW_LED_CTL_TX4: |
1843 | if (sc->sc_gpio_ledinprogress == 1) |
1844 | return (0); |
1845 | |
1846 | sc->sc_gpio_ledstate = URTW_LED_BLINK_NORMAL3; |
1847 | sc->sc_gpio_blinktime = 2; |
1848 | break; |
1849 | case URTW_LED_CTL_LINK2: |
1850 | sc->sc_gpio_ledstate = URTW_LED_ON1; |
1851 | break; |
1852 | default: |
1853 | break; |
1854 | } |
1855 | |
1856 | switch (sc->sc_gpio_ledstate) { |
1857 | case URTW_LED_ON1: |
1858 | if (sc->sc_gpio_ledinprogress != 0) |
1859 | break; |
1860 | urtw_led_on(sc, URTW_LED_GPIO1); |
1861 | break; |
1862 | case URTW_LED_BLINK_NORMAL3: |
1863 | if (sc->sc_gpio_ledinprogress != 0) |
1864 | break; |
1865 | sc->sc_gpio_ledinprogress = 1; |
1866 | sc->sc_gpio_blinkstate = (sc->sc_gpio_ledon != 0) ? |
1867 | URTW_LED_OFF2 : URTW_LED_ON1; |
1868 | if (!usbd_is_dying(sc->sc_udev)) |
1869 | timeout_add_msec(&sc->sc_led_ch, 100); |
1870 | break; |
1871 | case URTW_LED_POWER_ON_BLINK5: |
1872 | urtw_led_on(sc, URTW_LED_GPIO1); |
1873 | usbd_delay_ms(sc->sc_udev, 100); |
1874 | urtw_led_off(sc, URTW_LED_GPIO1); |
1875 | break; |
1876 | default: |
1877 | break; |
1878 | } |
1879 | return (0); |
1880 | } |
1881 | |
1882 | usbd_status |
1883 | urtw_led_mode1(struct urtw_softc *sc, int mode) |
1884 | { |
1885 | return (USBD_INVAL); |
1886 | } |
1887 | |
1888 | usbd_status |
1889 | urtw_led_mode2(struct urtw_softc *sc, int mode) |
1890 | { |
1891 | return (USBD_INVAL); |
1892 | } |
1893 | |
1894 | usbd_status |
1895 | urtw_led_mode3(struct urtw_softc *sc, int mode) |
1896 | { |
1897 | return (USBD_INVAL); |
1898 | } |
1899 | |
1900 | void |
1901 | urtw_ledusbtask(void *arg) |
1902 | { |
1903 | struct urtw_softc *sc = arg; |
1904 | |
1905 | if (sc->sc_strategy != URTW_SW_LED_MODE00) |
1906 | return; |
1907 | |
1908 | urtw_led_blink(sc); |
1909 | } |
1910 | |
1911 | void |
1912 | urtw_ledtask(void *arg) |
1913 | { |
1914 | struct urtw_softc *sc = arg; |
1915 | |
1916 | /* |
1917 | * NB: to change a status of the led we need at least a sleep so we |
1918 | * can't do it here |
1919 | */ |
1920 | usb_add_task(sc->sc_udev, &sc->sc_ledtask); |
1921 | } |
1922 | |
1923 | usbd_status |
1924 | urtw_led_ctl(struct urtw_softc *sc, int mode) |
1925 | { |
1926 | usbd_status error = 0; |
1927 | |
1928 | switch (sc->sc_strategy) { |
1929 | case URTW_SW_LED_MODE00: |
1930 | error = urtw_led_mode0(sc, mode); |
1931 | break; |
1932 | case URTW_SW_LED_MODE11: |
1933 | error = urtw_led_mode1(sc, mode); |
1934 | break; |
1935 | case URTW_SW_LED_MODE22: |
1936 | error = urtw_led_mode2(sc, mode); |
1937 | break; |
1938 | case URTW_SW_LED_MODE33: |
1939 | error = urtw_led_mode3(sc, mode); |
1940 | break; |
1941 | default: |
1942 | break; |
1943 | } |
1944 | |
1945 | return (error); |
1946 | } |
1947 | |
1948 | usbd_status |
1949 | urtw_led_blink(struct urtw_softc *sc) |
1950 | { |
1951 | uint8_t ing = 0; |
1952 | usbd_status error; |
1953 | |
1954 | if (sc->sc_gpio_blinkstate == URTW_LED_ON1) |
1955 | error = urtw_led_on(sc, URTW_LED_GPIO1); |
1956 | else |
1957 | error = urtw_led_off(sc, URTW_LED_GPIO1); |
1958 | sc->sc_gpio_blinktime--; |
1959 | if (sc->sc_gpio_blinktime == 0) |
1960 | ing = 1; |
1961 | else { |
1962 | if (sc->sc_gpio_ledstate != URTW_LED_BLINK_NORMAL3 && |
1963 | sc->sc_gpio_ledstate != URTW_LED_BLINK_SLOWLY4 && |
1964 | sc->sc_gpio_ledstate != URTW_LED_BLINK_CM38) |
1965 | ing = 1; |
1966 | } |
1967 | if (ing == 1) { |
1968 | if (sc->sc_gpio_ledstate == URTW_LED_ON1 && |
1969 | sc->sc_gpio_ledon == 0) |
1970 | error = urtw_led_on(sc, URTW_LED_GPIO1); |
1971 | else if (sc->sc_gpio_ledstate == URTW_LED_OFF2 && |
1972 | sc->sc_gpio_ledon == 1) |
1973 | error = urtw_led_off(sc, URTW_LED_GPIO1); |
Value stored to 'error' is never read | |
1974 | |
1975 | sc->sc_gpio_blinktime = 0; |
1976 | sc->sc_gpio_ledinprogress = 0; |
1977 | return (0); |
1978 | } |
1979 | |
1980 | sc->sc_gpio_blinkstate = (sc->sc_gpio_blinkstate != URTW_LED_ON1) ? |
1981 | URTW_LED_ON1 : URTW_LED_OFF2; |
1982 | |
1983 | switch (sc->sc_gpio_ledstate) { |
1984 | case URTW_LED_BLINK_NORMAL3: |
1985 | if (!usbd_is_dying(sc->sc_udev)) |
1986 | timeout_add_msec(&sc->sc_led_ch, 100); |
1987 | break; |
1988 | default: |
1989 | break; |
1990 | } |
1991 | return (0); |
1992 | } |
1993 | |
1994 | usbd_status |
1995 | urtw_update_msr(struct urtw_softc *sc) |
1996 | { |
1997 | struct ieee80211com *ic = &sc->sc_ic; |
1998 | uint8_t data; |
1999 | usbd_status error; |
2000 | |
2001 | urtw_read8_m(sc, URTW_MSR, &data)do { error = urtw_read8_c(sc, 0x0058, &data, 0); if (error != 0) goto fail; } while (0); |
2002 | data &= ~URTW_MSR_LINK_MASK((1 << 2) | (1 << 3)); |
2003 | |
2004 | /* Should always be set. */ |
2005 | if (sc->sc_hwrev & URTW_HWREV_8187B0x08) |
2006 | data |= URTW_MSR_LINK_ENEDCA(4 << (2)); |
2007 | |
2008 | if (sc->sc_state == IEEE80211_S_RUN) { |
2009 | switch (ic->ic_opmode) { |
2010 | case IEEE80211_M_STA: |
2011 | case IEEE80211_M_MONITOR: |
2012 | data |= URTW_MSR_LINK_STA(2 << (2)); |
2013 | break; |
2014 | default: |
2015 | break; |
2016 | } |
2017 | } else |
2018 | data |= URTW_MSR_LINK_NONE(0 << (2)); |
2019 | |
2020 | urtw_write8_m(sc, URTW_MSR, data)do { error = urtw_write8_c(sc, 0x0058, data, 0); if (error != 0) goto fail; } while (0); |
2021 | fail: |
2022 | return (error); |
2023 | } |
2024 | |
2025 | uint16_t |
2026 | urtw_rate2rtl(int rate) |
2027 | { |
2028 | int i; |
2029 | |
2030 | for (i = 0; i < nitems(urtw_ratetable)(sizeof((urtw_ratetable)) / sizeof((urtw_ratetable)[0])); i++) { |
2031 | if (rate == urtw_ratetable[i].reg) |
2032 | return (urtw_ratetable[i].val); |
2033 | } |
2034 | |
2035 | return (3); |
2036 | } |
2037 | |
2038 | uint16_t |
2039 | urtw_rtl2rate(int rate) |
2040 | { |
2041 | int i; |
2042 | |
2043 | for (i = 0; i < nitems(urtw_ratetable)(sizeof((urtw_ratetable)) / sizeof((urtw_ratetable)[0])); i++) { |
2044 | if (rate == urtw_ratetable[i].val) |
2045 | return (urtw_ratetable[i].reg); |
2046 | } |
2047 | |
2048 | return (0); |
2049 | } |
2050 | |
2051 | usbd_status |
2052 | urtw_set_rate(struct urtw_softc *sc) |
2053 | { |
2054 | int i, basic_rate, min_rr_rate, max_rr_rate; |
2055 | uint16_t data; |
2056 | usbd_status error; |
2057 | |
2058 | basic_rate = urtw_rate2rtl(48); |
2059 | min_rr_rate = urtw_rate2rtl(12); |
2060 | max_rr_rate = urtw_rate2rtl(48); |
2061 | |
2062 | urtw_write8_m(sc, URTW_RESP_RATE,do { error = urtw_write8_c(sc, 0x0034, max_rr_rate << ( 4) | min_rr_rate << (0), 0); if (error != 0) goto fail; } while (0) |
2063 | max_rr_rate << URTW_RESP_MAX_RATE_SHIFT |do { error = urtw_write8_c(sc, 0x0034, max_rr_rate << ( 4) | min_rr_rate << (0), 0); if (error != 0) goto fail; } while (0) |
2064 | min_rr_rate << URTW_RESP_MIN_RATE_SHIFT)do { error = urtw_write8_c(sc, 0x0034, max_rr_rate << ( 4) | min_rr_rate << (0), 0); if (error != 0) goto fail; } while (0); |
2065 | |
2066 | urtw_read16_m(sc, URTW_8187_BRSR, &data)do { error = urtw_read16_c(sc, 0x002c, &data, 0); if (error != 0) goto fail; } while (0); |
2067 | data &= ~URTW_BRSR_MBR_8185(0x0fff); |
2068 | |
2069 | for (i = 0; i <= basic_rate; i++) |
2070 | data |= (1 << i); |
2071 | |
2072 | urtw_write16_m(sc, URTW_8187_BRSR, data)do { error = urtw_write16_c(sc, 0x002c, data, 0); if (error != 0) goto fail; } while (0); |
2073 | fail: |
2074 | return (error); |
2075 | } |
2076 | |
2077 | usbd_status |
2078 | urtw_intr_enable(struct urtw_softc *sc) |
2079 | { |
2080 | usbd_status error; |
2081 | |
2082 | urtw_write16_m(sc, URTW_INTR_MASK, 0xffff)do { error = urtw_write16_c(sc, 0x003c, 0xffff, 0); if (error != 0) goto fail; } while (0); |
2083 | fail: |
2084 | return (error); |
2085 | } |
2086 | |
2087 | usbd_status |
2088 | urtw_rx_setconf(struct urtw_softc *sc) |
2089 | { |
2090 | struct ifnet *ifp = &sc->sc_ic.ic_ific_ac.ac_if; |
2091 | struct ieee80211com *ic = &sc->sc_ic; |
2092 | uint32_t data; |
2093 | usbd_status error; |
2094 | |
2095 | urtw_read32_m(sc, URTW_RX, &data)do { error = urtw_read32_c(sc, 0x0044, &data, 0); if (error != 0) goto fail; } while (0); |
2096 | data = data &~ URTW_RX_FILTER_MASK((0x00000001) | (0x00000002) | (0x00000004) | (0x00000008) | ( 0x00000020) | (0x00001000) | (0x00040000) | (0x00080000) | (0x00100000 ) | (1 << 21) | (0x00400000) | (0x00800000)); |
2097 | #if 0 |
2098 | data = data | URTW_RX_FILTER_CTL(0x00080000); |
2099 | #endif |
2100 | data = data | URTW_RX_FILTER_MNG(0x00100000) | URTW_RX_FILTER_DATA(0x00040000); |
2101 | data = data | URTW_RX_FILTER_BCAST(0x00000008) | URTW_RX_FILTER_MCAST(0x00000004); |
2102 | |
2103 | if (ic->ic_opmode == IEEE80211_M_MONITOR) { |
2104 | data = data | URTW_RX_FILTER_ICVERR(0x00001000); |
2105 | data = data | URTW_RX_FILTER_PWR(0x00400000); |
2106 | } |
2107 | if (sc->sc_crcmon == 1 && ic->ic_opmode == IEEE80211_M_MONITOR) |
2108 | data = data | URTW_RX_FILTER_CRCERR(0x00000020); |
2109 | |
2110 | if (ic->ic_opmode == IEEE80211_M_MONITOR || |
2111 | (ifp->if_flags & (IFF_ALLMULTI0x200 | IFF_PROMISC0x100))) { |
2112 | data = data | URTW_RX_FILTER_ALLMAC(0x00000001); |
2113 | } else { |
2114 | data = data | URTW_RX_FILTER_NICMAC(0x00000002); |
2115 | data = data | URTW_RX_CHECK_BSSID(0x00800000); |
2116 | } |
2117 | |
2118 | data = data &~ URTW_RX_FIFO_THRESHOLD_MASK((1 << 13) | (1 << 14) | (1 << 15)); |
2119 | data = data | URTW_RX_FIFO_THRESHOLD_NONE(7 << (13)) | URTW_RX_AUTORESETPHY(1 << (28)); |
2120 | data = data &~ URTW_MAX_RX_DMA_MASK((1<<8) | (1<<9) | (1<<10)); |
2121 | data = data | URTW_MAX_RX_DMA_2048(7 << (10)) | URTW_RCR_ONLYERLPKT(1U << 31); |
2122 | |
2123 | urtw_write32_m(sc, URTW_RX, data)do { error = urtw_write32_c(sc, 0x0044, data, 0); if (error != 0) goto fail; } while (0); |
2124 | fail: |
2125 | return (error); |
2126 | } |
2127 | |
2128 | usbd_status |
2129 | urtw_rx_enable(struct urtw_softc *sc) |
2130 | { |
2131 | int i; |
2132 | struct urtw_rx_data *rx_data; |
2133 | uint8_t data; |
2134 | usbd_status error; |
2135 | |
2136 | /* |
2137 | * Start up the receive pipe. |
2138 | */ |
2139 | for (i = 0; i < URTW_RX_DATA_LIST_COUNT1; i++) { |
2140 | rx_data = &sc->sc_rx_data[i]; |
2141 | |
2142 | usbd_setup_xfer(rx_data->xfer, sc->sc_rxpipe, rx_data, |
2143 | rx_data->buf, MCLBYTES(1 << 11), USBD_SHORT_XFER_OK0x04, |
2144 | USBD_NO_TIMEOUT0, urtw_rxeof); |
2145 | error = usbd_transfer(rx_data->xfer); |
2146 | if (error != USBD_IN_PROGRESS && error != 0) { |
2147 | printf("%s: could not queue Rx transfer\n", |
2148 | sc->sc_dev.dv_xname); |
2149 | goto fail; |
2150 | } |
2151 | } |
2152 | |
2153 | error = urtw_rx_setconf(sc); |
2154 | if (error != 0) |
2155 | goto fail; |
2156 | |
2157 | urtw_read8_m(sc, URTW_CMD, &data)do { error = urtw_read8_c(sc, 0x0037, &data, 0); if (error != 0) goto fail; } while (0); |
2158 | urtw_write8_m(sc, URTW_CMD, data | URTW_CMD_RX_ENABLE)do { error = urtw_write8_c(sc, 0x0037, data | (0x8), 0); if ( error != 0) goto fail; } while (0); |
2159 | fail: |
2160 | return (error); |
2161 | } |
2162 | |
2163 | usbd_status |
2164 | urtw_tx_enable(struct urtw_softc *sc) |
2165 | { |
2166 | uint8_t data8; |
2167 | uint32_t data; |
2168 | usbd_status error; |
2169 | |
2170 | if (sc->sc_hwrev & URTW_HWREV_81870x01) { |
2171 | urtw_read8_m(sc, URTW_CW_CONF, &data8)do { error = urtw_read8_c(sc, 0x00bc, &data8, 0); if (error != 0) goto fail; } while (0); |
2172 | data8 &= ~(URTW_CW_CONF_PERPACKET_CW(0x1) | |
2173 | URTW_CW_CONF_PERPACKET_RETRY(0x2)); |
2174 | urtw_write8_m(sc, URTW_CW_CONF, data8)do { error = urtw_write8_c(sc, 0x00bc, data8, 0); if (error != 0) goto fail; } while (0); |
2175 | |
2176 | urtw_read8_m(sc, URTW_TX_AGC_CTL, &data8)do { error = urtw_read8_c(sc, 0x009c, &data8, 0); if (error != 0) goto fail; } while (0); |
2177 | data8 &= ~URTW_TX_AGC_CTL_PERPACKET_GAIN(0x1); |
2178 | data8 &= ~URTW_TX_AGC_CTL_PERPACKET_ANTSEL(0x2); |
2179 | data8 &= ~URTW_TX_AGC_CTL_FEEDBACK_ANT(0x4); |
2180 | urtw_write8_m(sc, URTW_TX_AGC_CTL, data8)do { error = urtw_write8_c(sc, 0x009c, data8, 0); if (error != 0) goto fail; } while (0); |
2181 | |
2182 | urtw_read32_m(sc, URTW_TX_CONF, &data)do { error = urtw_read32_c(sc, 0x0040, &data, 0); if (error != 0) goto fail; } while (0); |
2183 | data &= ~URTW_TX_LOOPBACK_MASK(0x60000); |
2184 | data |= URTW_TX_LOOPBACK_NONE(0 << (17)); |
2185 | data &= ~(URTW_TX_DPRETRY_MASK(0xff00) | URTW_TX_RTSRETRY_MASK(0xff)); |
2186 | data |= sc->sc_tx_retry << URTW_TX_DPRETRY_SHIFT(0); |
2187 | data |= sc->sc_rts_retry << URTW_TX_RTSRETRY_SHIFT(8); |
2188 | data &= ~(URTW_TX_NOCRC(0x10000) | URTW_TX_MXDMA_MASK(0xe00000)); |
2189 | data |= URTW_TX_MXDMA_2048(7 << (21)) | URTW_TX_CWMIN(1U << 31) | URTW_TX_DISCW(1U << 20); |
2190 | data &= ~URTW_TX_SWPLCPLEN(1U << 24); |
2191 | data |= URTW_TX_NOICV(0x80000); |
2192 | urtw_write32_m(sc, URTW_TX_CONF, data)do { error = urtw_write32_c(sc, 0x0040, data, 0); if (error != 0) goto fail; } while (0); |
2193 | } else { |
2194 | data = URTW_TX_DURPROCMODE(1 << 30) | URTW_TX_DISREQQSIZE(1 << 28) | |
2195 | URTW_TX_MXDMA_2048(7 << (21)) | URTW_TX_SHORTRETRY(7 << 8) | |
2196 | URTW_TX_LONGRETRY(7 << 0); |
2197 | urtw_write32_m(sc, URTW_TX_CONF, data)do { error = urtw_write32_c(sc, 0x0040, data, 0); if (error != 0) goto fail; } while (0); |
2198 | } |
2199 | |
2200 | urtw_read8_m(sc, URTW_CMD, &data8)do { error = urtw_read8_c(sc, 0x0037, &data8, 0); if (error != 0) goto fail; } while (0); |
2201 | urtw_write8_m(sc, URTW_CMD, data8 | URTW_CMD_TX_ENABLE)do { error = urtw_write8_c(sc, 0x0037, data8 | (0x4), 0); if ( error != 0) goto fail; } while (0); |
2202 | fail: |
2203 | return (error); |
2204 | } |
2205 | |
2206 | int |
2207 | urtw_init(struct ifnet *ifp) |
2208 | { |
2209 | struct urtw_softc *sc = ifp->if_softc; |
2210 | struct urtw_rf *rf = &sc->sc_rf; |
2211 | struct ieee80211com *ic = &sc->sc_ic; |
2212 | usbd_status error; |
2213 | |
2214 | urtw_stop(ifp, 0); |
2215 | |
2216 | error = urtw_reset(sc); |
2217 | if (error) |
2218 | goto fail; |
2219 | |
2220 | urtw_write8_m(sc, 0x85, 0)do { error = urtw_write8_c(sc, 0x85, 0, 0); if (error != 0) goto fail; } while (0); |
2221 | urtw_write8_m(sc, URTW_GPIO, 0)do { error = urtw_write8_c(sc, 0x0091, 0, 0); if (error != 0) goto fail; } while (0); |
2222 | |
2223 | /* for led */ |
2224 | urtw_write8_m(sc, 0x85, 4)do { error = urtw_write8_c(sc, 0x85, 4, 0); if (error != 0) goto fail; } while (0); |
2225 | error = urtw_led_ctl(sc, URTW_LED_CTL_POWER_ON0); |
2226 | if (error != 0) |
2227 | goto fail; |
2228 | |
2229 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
2230 | if (error) |
2231 | goto fail; |
2232 | |
2233 | /* applying MAC address again. */ |
2234 | IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl))__builtin_memcpy((ic->ic_myaddr), (((caddr_t)((ifp->if_sadl )->sdl_data + (ifp->if_sadl)->sdl_nlen))), (6)); |
2235 | error = urtw_set_macaddr(sc, ic->ic_myaddr); |
2236 | if (error) |
2237 | goto fail; |
2238 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
2239 | if (error) |
2240 | goto fail; |
2241 | |
2242 | error = urtw_update_msr(sc); |
2243 | if (error) |
2244 | goto fail; |
2245 | |
2246 | urtw_write32_m(sc, URTW_INT_TIMEOUT, 0)do { error = urtw_write32_c(sc, 0x0048, 0, 0); if (error != 0 ) goto fail; } while (0); |
2247 | urtw_write8_m(sc, URTW_WPA_CONFIG, 0)do { error = urtw_write8_c(sc, 0x00b0, 0, 0); if (error != 0) goto fail; } while (0); |
2248 | urtw_write8_m(sc, URTW_RATE_FALLBACK, 0x81)do { error = urtw_write8_c(sc, 0x00be, 0x81, 0); if (error != 0) goto fail; } while (0); |
2249 | error = urtw_set_rate(sc); |
2250 | if (error != 0) |
2251 | goto fail; |
2252 | |
2253 | error = rf->init(rf); |
2254 | if (error != 0) |
2255 | goto fail; |
2256 | if (rf->set_sens != NULL((void *)0)) |
2257 | rf->set_sens(rf); |
2258 | |
2259 | urtw_write16_m(sc, 0x5e, 1)do { error = urtw_write16_c(sc, 0x5e, 1, 0); if (error != 0) goto fail; } while (0); |
2260 | urtw_write16_m(sc, 0xfe, 0x10)do { error = urtw_write16_c(sc, 0xfe, 0x10, 0); if (error != 0 ) goto fail; } while (0); |
2261 | urtw_write8_m(sc, URTW_TALLY_SEL, 0x80)do { error = urtw_write8_c(sc, 0x00fc, 0x80, 0); if (error != 0) goto fail; } while (0); |
2262 | urtw_write8_m(sc, 0xff, 0x60)do { error = urtw_write8_c(sc, 0xff, 0x60, 0); if (error != 0 ) goto fail; } while (0); |
2263 | urtw_write16_m(sc, 0x5e, 0)do { error = urtw_write16_c(sc, 0x5e, 0, 0); if (error != 0) goto fail; } while (0); |
2264 | urtw_write8_m(sc, 0x85, 4)do { error = urtw_write8_c(sc, 0x85, 4, 0); if (error != 0) goto fail; } while (0); |
2265 | |
2266 | error = urtw_intr_enable(sc); |
2267 | if (error != 0) |
2268 | goto fail; |
2269 | |
2270 | /* reset softc variables */ |
2271 | sc->sc_txidx = sc->sc_tx_low_queued = sc->sc_tx_normal_queued = 0; |
2272 | sc->sc_txtimer = 0; |
2273 | |
2274 | if (!(sc->sc_flags & URTW_INIT_ONCE(1 << 1))) { |
2275 | error = urtw_open_pipes(sc); |
2276 | if (error != 0) |
2277 | goto fail; |
2278 | error = urtw_alloc_rx_data_list(sc); |
2279 | if (error != 0) |
2280 | goto fail; |
2281 | error = urtw_alloc_tx_data_list(sc); |
2282 | if (error != 0) |
2283 | goto fail; |
2284 | sc->sc_flags |= URTW_INIT_ONCE(1 << 1); |
2285 | } |
2286 | |
2287 | error = urtw_rx_enable(sc); |
2288 | if (error != 0) |
2289 | goto fail; |
2290 | error = urtw_tx_enable(sc); |
2291 | if (error != 0) |
2292 | goto fail; |
2293 | |
2294 | ifq_clr_oactive(&ifp->if_snd); |
2295 | ifp->if_flags |= IFF_RUNNING0x40; |
2296 | |
2297 | ifp->if_timer = 1; |
2298 | |
2299 | if (ic->ic_opmode == IEEE80211_M_MONITOR) |
2300 | ieee80211_new_state(ic, IEEE80211_S_RUN, -1)(((ic)->ic_newstate)((ic), (IEEE80211_S_RUN), (-1))); |
2301 | else |
2302 | ieee80211_new_state(ic, IEEE80211_S_SCAN, -1)(((ic)->ic_newstate)((ic), (IEEE80211_S_SCAN), (-1))); |
2303 | |
2304 | return (0); |
2305 | fail: |
2306 | return (error); |
2307 | } |
2308 | |
2309 | void |
2310 | urtw_set_multi(struct urtw_softc *sc) |
2311 | { |
2312 | struct arpcom *ac = &sc->sc_ic.ic_ac; |
2313 | struct ifnet *ifp = &ac->ac_if; |
2314 | |
2315 | /* |
2316 | * XXX don't know how to set a device. Lack of docs. Just try to set |
2317 | * IFF_ALLMULTI flag here. |
2318 | */ |
2319 | ifp->if_flags |= IFF_ALLMULTI0x200; |
2320 | } |
2321 | |
2322 | int |
2323 | urtw_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) |
2324 | { |
2325 | struct urtw_softc *sc = ifp->if_softc; |
2326 | struct ieee80211com *ic = &sc->sc_ic; |
2327 | struct ifreq *ifr; |
2328 | int s, error = 0; |
2329 | |
2330 | if (usbd_is_dying(sc->sc_udev)) |
2331 | return (ENXIO6); |
2332 | |
2333 | usbd_ref_incr(sc->sc_udev); |
2334 | |
2335 | s = splnet()splraise(0x7); |
2336 | |
2337 | switch (cmd) { |
2338 | case SIOCSIFADDR((unsigned long)0x80000000 | ((sizeof(struct ifreq) & 0x1fff ) << 16) | ((('i')) << 8) | ((12))): |
2339 | ifp->if_flags |= IFF_UP0x1; |
2340 | /* FALLTHROUGH */ |
2341 | case SIOCSIFFLAGS((unsigned long)0x80000000 | ((sizeof(struct ifreq) & 0x1fff ) << 16) | ((('i')) << 8) | ((16))): |
2342 | if (ifp->if_flags & IFF_UP0x1) { |
2343 | /* |
2344 | * If only the PROMISC or ALLMULTI flag changes, then |
2345 | * don't do a full re-init of the chip, just update |
2346 | * the Rx filter. |
2347 | */ |
2348 | if ((ifp->if_flags & IFF_RUNNING0x40) && |
2349 | ((ifp->if_flags ^ sc->sc_if_flags) & |
2350 | (IFF_ALLMULTI0x200 | IFF_PROMISC0x100)) != 0) { |
2351 | urtw_set_multi(sc); |
2352 | } else { |
2353 | if (!(ifp->if_flags & IFF_RUNNING0x40)) |
2354 | sc->sc_init(ifp); |
2355 | } |
2356 | } else { |
2357 | if (ifp->if_flags & IFF_RUNNING0x40) |
2358 | urtw_stop(ifp, 1); |
2359 | } |
2360 | sc->sc_if_flags = ifp->if_flags; |
2361 | break; |
2362 | |
2363 | case SIOCADDMULTI((unsigned long)0x80000000 | ((sizeof(struct ifreq) & 0x1fff ) << 16) | ((('i')) << 8) | ((49))): |
2364 | case SIOCDELMULTI((unsigned long)0x80000000 | ((sizeof(struct ifreq) & 0x1fff ) << 16) | ((('i')) << 8) | ((50))): |
2365 | ifr = (struct ifreq *)data; |
2366 | error = (cmd == SIOCADDMULTI((unsigned long)0x80000000 | ((sizeof(struct ifreq) & 0x1fff ) << 16) | ((('i')) << 8) | ((49)))) ? |
2367 | ether_addmulti(ifr, &ic->ic_ac) : |
2368 | ether_delmulti(ifr, &ic->ic_ac); |
2369 | if (error == ENETRESET52) { |
2370 | if (ifp->if_flags & IFF_RUNNING0x40) |
2371 | urtw_set_multi(sc); |
2372 | error = 0; |
2373 | } |
2374 | break; |
2375 | |
2376 | case SIOCS80211CHANNEL((unsigned long)0x80000000 | ((sizeof(struct ieee80211chanreq ) & 0x1fff) << 16) | ((('i')) << 8) | ((238)) ): |
2377 | /* |
2378 | * This allows for fast channel switching in monitor mode |
2379 | * (used by kismet). In IBSS mode, we must explicitly reset |
2380 | * the interface to generate a new beacon frame. |
2381 | */ |
2382 | error = ieee80211_ioctl(ifp, cmd, data); |
2383 | if (error == ENETRESET52 && |
2384 | ic->ic_opmode == IEEE80211_M_MONITOR) { |
2385 | urtw_set_chan(sc, ic->ic_ibss_chan); |
2386 | error = 0; |
2387 | } |
2388 | break; |
2389 | |
2390 | default: |
2391 | error = ieee80211_ioctl(ifp, cmd, data); |
2392 | } |
2393 | |
2394 | if (error == ENETRESET52) { |
2395 | if ((ifp->if_flags & (IFF_RUNNING0x40 | IFF_UP0x1)) == |
2396 | (IFF_RUNNING0x40 | IFF_UP0x1)) |
2397 | sc->sc_init(ifp); |
2398 | error = 0; |
2399 | } |
2400 | |
2401 | splx(s)spllower(s); |
2402 | |
2403 | usbd_ref_decr(sc->sc_udev); |
2404 | |
2405 | return (error); |
2406 | } |
2407 | |
2408 | void |
2409 | urtw_start(struct ifnet *ifp) |
2410 | { |
2411 | struct urtw_softc *sc = ifp->if_softc; |
2412 | struct ieee80211com *ic = &sc->sc_ic; |
2413 | struct ieee80211_node *ni; |
2414 | struct mbuf *m0; |
2415 | |
2416 | /* |
2417 | * net80211 may still try to send management frames even if the |
2418 | * IFF_RUNNING flag is not set... |
2419 | */ |
2420 | if (!(ifp->if_flags & IFF_RUNNING0x40) || ifq_is_oactive(&ifp->if_snd)) |
2421 | return; |
2422 | |
2423 | for (;;) { |
2424 | if (sc->sc_tx_low_queued >= URTW_TX_DATA_LIST_COUNT16 || |
2425 | sc->sc_tx_normal_queued >= URTW_TX_DATA_LIST_COUNT16) { |
2426 | ifq_set_oactive(&ifp->if_snd); |
2427 | break; |
2428 | } |
2429 | |
2430 | m0 = mq_dequeue(&ic->ic_mgtq); |
2431 | if (m0 != NULL((void *)0)) { |
2432 | ni = m0->m_pkthdrM_dat.MH.MH_pkthdr.ph_cookie; |
2433 | #if NBPFILTER1 > 0 |
2434 | if (ic->ic_rawbpf != NULL((void *)0)) |
2435 | bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT(1 << 1)); |
2436 | #endif |
2437 | if (urtw_tx_start(sc, ni, m0, URTW_PRIORITY_NORMAL1) |
2438 | != 0) |
2439 | break; |
2440 | } else { |
2441 | if (ic->ic_state != IEEE80211_S_RUN) |
2442 | break; |
2443 | m0 = ifq_dequeue(&ifp->if_snd); |
2444 | if (m0 == NULL((void *)0)) |
2445 | break; |
2446 | #if NBPFILTER1 > 0 |
2447 | if (ifp->if_bpf != NULL((void *)0)) |
2448 | bpf_mtap(ifp->if_bpf, m0, BPF_DIRECTION_OUT(1 << 1)); |
2449 | #endif |
2450 | m0 = ieee80211_encap(ifp, m0, &ni); |
2451 | if (m0 == NULL((void *)0)) |
2452 | continue; |
2453 | #if NBPFILTER1 > 0 |
2454 | if (ic->ic_rawbpf != NULL((void *)0)) |
2455 | bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT(1 << 1)); |
2456 | #endif |
2457 | if (urtw_tx_start(sc, ni, m0, URTW_PRIORITY_NORMAL1) |
2458 | != 0) { |
2459 | if (ni != NULL((void *)0)) |
2460 | ieee80211_release_node(ic, ni); |
2461 | ifp->if_oerrorsif_data.ifi_oerrors++; |
2462 | break; |
2463 | } |
2464 | } |
2465 | sc->sc_txtimer = 5; |
2466 | } |
2467 | } |
2468 | |
2469 | void |
2470 | urtw_watchdog(struct ifnet *ifp) |
2471 | { |
2472 | struct urtw_softc *sc = ifp->if_softc; |
2473 | |
2474 | ifp->if_timer = 0; |
2475 | |
2476 | if (sc->sc_txtimer > 0) { |
2477 | if (--sc->sc_txtimer == 0) { |
2478 | printf("%s: device timeout\n", sc->sc_dev.dv_xname); |
2479 | ifp->if_oerrorsif_data.ifi_oerrors++; |
2480 | return; |
2481 | } |
2482 | ifp->if_timer = 1; |
2483 | } |
2484 | |
2485 | ieee80211_watchdog(ifp); |
2486 | } |
2487 | |
2488 | void |
2489 | urtw_txeof_low(struct usbd_xfer *xfer, void *priv, |
2490 | usbd_status status) |
2491 | { |
2492 | struct urtw_tx_data *data = priv; |
2493 | struct urtw_softc *sc = data->sc; |
2494 | struct ieee80211com *ic = &sc->sc_ic; |
2495 | struct ifnet *ifp = &ic->ic_ific_ac.ac_if; |
2496 | int s; |
2497 | |
2498 | if (status != USBD_NORMAL_COMPLETION) { |
2499 | if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) |
2500 | return; |
2501 | |
2502 | printf("%s: could not transmit buffer: %s\n", |
2503 | sc->sc_dev.dv_xname, usbd_errstr(status)); |
2504 | |
2505 | if (status == USBD_STALLED) |
2506 | usbd_clear_endpoint_stall_async(sc->sc_txpipe_low); |
2507 | |
2508 | ifp->if_oerrorsif_data.ifi_oerrors++; |
2509 | return; |
2510 | } |
2511 | |
2512 | s = splnet()splraise(0x7); |
2513 | |
2514 | ieee80211_release_node(ic, data->ni); |
2515 | data->ni = NULL((void *)0); |
2516 | |
2517 | sc->sc_txtimer = 0; |
2518 | |
2519 | sc->sc_tx_low_queued--; |
2520 | ifq_clr_oactive(&ifp->if_snd); |
2521 | urtw_start(ifp); |
2522 | |
2523 | splx(s)spllower(s); |
2524 | } |
2525 | |
2526 | void |
2527 | urtw_txeof_normal(struct usbd_xfer *xfer, void *priv, |
2528 | usbd_status status) |
2529 | { |
2530 | struct urtw_tx_data *data = priv; |
2531 | struct urtw_softc *sc = data->sc; |
2532 | struct ieee80211com *ic = &sc->sc_ic; |
2533 | struct ifnet *ifp = &ic->ic_ific_ac.ac_if; |
2534 | int s; |
2535 | |
2536 | if (status != USBD_NORMAL_COMPLETION) { |
2537 | if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) |
2538 | return; |
2539 | |
2540 | printf("%s: could not transmit buffer: %s\n", |
2541 | sc->sc_dev.dv_xname, usbd_errstr(status)); |
2542 | |
2543 | if (status == USBD_STALLED) |
2544 | usbd_clear_endpoint_stall_async(sc->sc_txpipe_normal); |
2545 | |
2546 | ifp->if_oerrorsif_data.ifi_oerrors++; |
2547 | return; |
2548 | } |
2549 | |
2550 | s = splnet()splraise(0x7); |
2551 | |
2552 | ieee80211_release_node(ic, data->ni); |
2553 | data->ni = NULL((void *)0); |
2554 | |
2555 | sc->sc_txtimer = 0; |
2556 | |
2557 | sc->sc_tx_normal_queued--; |
2558 | ifq_clr_oactive(&ifp->if_snd); |
2559 | urtw_start(ifp); |
2560 | |
2561 | splx(s)spllower(s); |
2562 | } |
2563 | |
2564 | int |
2565 | urtw_tx_start(struct urtw_softc *sc, struct ieee80211_node *ni, struct mbuf *m0, |
2566 | int prior) |
2567 | { |
2568 | struct ieee80211com *ic = &sc->sc_ic; |
2569 | struct urtw_tx_data *data; |
2570 | struct ieee80211_frame *wh; |
2571 | struct ieee80211_key *k; |
2572 | usbd_status error; |
2573 | int xferlen; |
2574 | |
2575 | wh = mtod(m0, struct ieee80211_frame *)((struct ieee80211_frame *)((m0)->m_hdr.mh_data)); |
2576 | |
2577 | if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED0x40) { |
2578 | k = ieee80211_get_txkey(ic, wh, ni); |
2579 | |
2580 | if ((m0 = ieee80211_encrypt(ic, m0, k)) == NULL((void *)0)) |
2581 | return (ENOBUFS55); |
2582 | |
2583 | /* packet header may have moved, reset our local pointer */ |
2584 | wh = mtod(m0, struct ieee80211_frame *)((struct ieee80211_frame *)((m0)->m_hdr.mh_data)); |
2585 | } |
2586 | |
2587 | #if NBPFILTER1 > 0 |
2588 | if (sc->sc_drvbpf != NULL((void *)0)) { |
2589 | struct mbuf mb; |
2590 | struct urtw_tx_radiotap_header *tap = &sc->sc_txtapsc_txtapu.th; |
2591 | |
2592 | tap->wt_flags = 0; |
2593 | tap->wt_rate = 0; |
2594 | tap->wt_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq)((__uint16_t)(ic->ic_bss->ni_chan->ic_freq)); |
2595 | tap->wt_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags)((__uint16_t)(ic->ic_bss->ni_chan->ic_flags)); |
2596 | |
2597 | mb.m_datam_hdr.mh_data = (caddr_t)tap; |
2598 | mb.m_lenm_hdr.mh_len = sc->sc_txtap_len; |
2599 | mb.m_nextm_hdr.mh_next = m0; |
2600 | mb.m_nextpktm_hdr.mh_nextpkt = NULL((void *)0); |
2601 | mb.m_typem_hdr.mh_type = 0; |
2602 | mb.m_flagsm_hdr.mh_flags = 0; |
2603 | bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_OUT(1 << 1)); |
2604 | } |
2605 | #endif |
2606 | |
2607 | if (sc->sc_hwrev & URTW_HWREV_81870x01) |
2608 | xferlen = m0->m_pkthdrM_dat.MH.MH_pkthdr.len + 4 * 3; |
2609 | else |
2610 | xferlen = m0->m_pkthdrM_dat.MH.MH_pkthdr.len + 4 * 8; |
2611 | |
2612 | if ((0 == xferlen % 64) || (0 == xferlen % 512)) |
2613 | xferlen += 1; |
2614 | |
2615 | data = &sc->sc_tx_data[sc->sc_txidx]; |
2616 | sc->sc_txidx = (sc->sc_txidx + 1) % URTW_TX_DATA_LIST_COUNT16; |
2617 | |
2618 | bzero(data->buf, URTW_TX_MAXSIZE)__builtin_bzero((data->buf), (0x9c4)); |
2619 | data->buf[0] = m0->m_pkthdrM_dat.MH.MH_pkthdr.len & 0xff; |
2620 | data->buf[1] = (m0->m_pkthdrM_dat.MH.MH_pkthdr.len & 0x0f00) >> 8; |
2621 | data->buf[1] |= (1 << 7); |
2622 | |
2623 | /* XXX sc_preamble_mode is always 2. */ |
2624 | if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE0x00040000) && |
2625 | (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE0x0020) && |
2626 | (sc->sc_preamble_mode == 1) && (sc->sc_currate != 0)) |
2627 | data->buf[2] |= 1; |
2628 | if ((m0->m_pkthdrM_dat.MH.MH_pkthdr.len > ic->ic_rtsthreshold) && |
2629 | prior == URTW_PRIORITY_LOW0) |
2630 | return ENOTSUP91; /* TODO */ |
2631 | if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG0x04) |
2632 | data->buf[2] |= (1 << 1); |
2633 | /* RTS rate - 10 means we use a basic rate. */ |
2634 | data->buf[2] |= (urtw_rate2rtl(2) << 3); |
2635 | /* |
2636 | * XXX currently TX rate control depends on the rate value of |
2637 | * RX descriptor because I don't know how to we can control TX rate |
2638 | * in more smart way. Please fix me you find a thing. |
2639 | */ |
2640 | data->buf[3] = sc->sc_currate; |
2641 | if (prior == URTW_PRIORITY_NORMAL1) { |
2642 | if (IEEE80211_IS_MULTICAST(wh->i_addr1)(*(wh->i_addr1) & 0x01)) |
2643 | data->buf[3] = urtw_rate2rtl(ni->ni_rates.rs_rates[0]); |
2644 | else if (ic->ic_fixed_rate != -1) |
2645 | data->buf[3] = urtw_rate2rtl(ic->ic_fixed_rate); |
2646 | } |
2647 | |
2648 | if (sc->sc_hwrev & URTW_HWREV_81870x01) { |
2649 | data->buf[8] = 3; /* CW minimum */ |
2650 | data->buf[8] |= (7 << 4); /* CW maximum */ |
2651 | data->buf[9] |= 11; /* retry limitation */ |
2652 | m_copydata(m0, 0, m0->m_pkthdrM_dat.MH.MH_pkthdr.len, &data->buf[12]); |
2653 | } else { |
2654 | data->buf[21] |= 11; /* retry limitation */ |
2655 | m_copydata(m0, 0, m0->m_pkthdrM_dat.MH.MH_pkthdr.len, &data->buf[32]); |
2656 | } |
2657 | |
2658 | data->ni = ni; |
2659 | |
2660 | /* mbuf is no longer needed. */ |
2661 | m_freem(m0); |
2662 | |
2663 | usbd_setup_xfer(data->xfer, |
2664 | (prior == URTW_PRIORITY_LOW0) ? sc->sc_txpipe_low : |
2665 | sc->sc_txpipe_normal, data, data->buf, xferlen, |
2666 | USBD_FORCE_SHORT_XFER0x08 | USBD_NO_COPY0x01, URTW_DATA_TIMEOUT10000, |
2667 | (prior == URTW_PRIORITY_LOW0) ? urtw_txeof_low : urtw_txeof_normal); |
2668 | error = usbd_transfer(data->xfer); |
2669 | if (error != USBD_IN_PROGRESS && error != USBD_NORMAL_COMPLETION) { |
2670 | printf("%s: could not send frame: %s\n", |
2671 | sc->sc_dev.dv_xname, usbd_errstr(error)); |
2672 | return (EIO5); |
2673 | } |
2674 | |
2675 | error = urtw_led_ctl(sc, URTW_LED_CTL_TX4); |
2676 | if (error != 0) |
2677 | printf("%s: could not control LED (%d)\n", |
2678 | sc->sc_dev.dv_xname, error); |
2679 | |
2680 | if (prior == URTW_PRIORITY_LOW0) |
2681 | sc->sc_tx_low_queued++; |
2682 | else |
2683 | sc->sc_tx_normal_queued++; |
2684 | |
2685 | return (0); |
2686 | } |
2687 | |
2688 | usbd_status |
2689 | urtw_8225_usb_init(struct urtw_softc *sc) |
2690 | { |
2691 | uint8_t data; |
2692 | usbd_status error; |
2693 | |
2694 | urtw_write8_m(sc, URTW_RF_PINS_SELECT + 1, 0)do { error = urtw_write8_c(sc, 0x0084 + 1, 0, 0); if (error != 0) goto fail; } while (0); |
2695 | urtw_write8_m(sc, URTW_GPIO, 0)do { error = urtw_write8_c(sc, 0x0091, 0, 0); if (error != 0) goto fail; } while (0); |
2696 | error = urtw_read8e(sc, 0x53, &data); |
2697 | if (error) |
2698 | goto fail; |
2699 | error = urtw_write8e(sc, 0x53, data | (1 << 7)); |
2700 | if (error) |
2701 | goto fail; |
2702 | urtw_write8_m(sc, URTW_RF_PINS_SELECT + 1, 4)do { error = urtw_write8_c(sc, 0x0084 + 1, 4, 0); if (error != 0) goto fail; } while (0); |
2703 | urtw_write8_m(sc, URTW_GPIO, 0x20)do { error = urtw_write8_c(sc, 0x0091, 0x20, 0); if (error != 0) goto fail; } while (0); |
2704 | urtw_write8_m(sc, URTW_GP_ENABLE, 0)do { error = urtw_write8_c(sc, 0x0090, 0, 0); if (error != 0) goto fail; } while (0); |
2705 | |
2706 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, 0x80)do { error = urtw_write16_c(sc, 0x0080, 0x80, 0); if (error != 0) goto fail; } while (0); |
2707 | urtw_write16_m(sc, URTW_RF_PINS_SELECT, 0x80)do { error = urtw_write16_c(sc, 0x0084, 0x80, 0); if (error != 0) goto fail; } while (0); |
2708 | urtw_write16_m(sc, URTW_RF_PINS_ENABLE, 0x80)do { error = urtw_write16_c(sc, 0x0082, 0x80, 0); if (error != 0) goto fail; } while (0); |
2709 | |
2710 | usbd_delay_ms(sc->sc_udev, 500); |
2711 | fail: |
2712 | return (error); |
2713 | } |
2714 | |
2715 | usbd_status |
2716 | urtw_8185_rf_pins_enable(struct urtw_softc *sc) |
2717 | { |
2718 | usbd_status error = 0; |
2719 | |
2720 | urtw_write16_m(sc, URTW_RF_PINS_ENABLE, 0x1ff7)do { error = urtw_write16_c(sc, 0x0082, 0x1ff7, 0); if (error != 0) goto fail; } while (0); |
2721 | fail: |
2722 | return (error); |
2723 | } |
2724 | |
2725 | usbd_status |
2726 | urtw_8187_write_phy(struct urtw_softc *sc, uint8_t addr, uint32_t data) |
2727 | { |
2728 | uint32_t phyw; |
2729 | usbd_status error; |
2730 | |
2731 | phyw = ((data << 8) | (addr | 0x80)); |
2732 | urtw_write8_m(sc, 0x7f, ((phyw & 0xff000000) >> 24))do { error = urtw_write8_c(sc, 0x7f, ((phyw & 0xff000000) >> 24), 0); if (error != 0) goto fail; } while (0); |
2733 | urtw_write8_m(sc, 0x7e, ((phyw & 0x00ff0000) >> 16))do { error = urtw_write8_c(sc, 0x7e, ((phyw & 0x00ff0000) >> 16), 0); if (error != 0) goto fail; } while (0); |
2734 | urtw_write8_m(sc, 0x7d, ((phyw & 0x0000ff00) >> 8))do { error = urtw_write8_c(sc, 0x7d, ((phyw & 0x0000ff00) >> 8), 0); if (error != 0) goto fail; } while (0); |
2735 | urtw_write8_m(sc, 0x7c, ((phyw & 0x000000ff)))do { error = urtw_write8_c(sc, 0x7c, ((phyw & 0x000000ff) ), 0); if (error != 0) goto fail; } while (0); |
2736 | /* |
2737 | * Delay removed from 8185 to 8187. |
2738 | * usbd_delay_ms(sc->sc_udev, 1); |
2739 | */ |
2740 | fail: |
2741 | return (error); |
2742 | } |
2743 | |
2744 | usbd_status |
2745 | urtw_8187_write_phy_ofdm_c(struct urtw_softc *sc, uint8_t addr, uint32_t data) |
2746 | { |
2747 | data = data & 0xff; |
2748 | return (urtw_8187_write_phy(sc, addr, data)); |
2749 | } |
2750 | |
2751 | usbd_status |
2752 | urtw_8187_write_phy_cck_c(struct urtw_softc *sc, uint8_t addr, uint32_t data) |
2753 | { |
2754 | data = data & 0xff; |
2755 | return (urtw_8187_write_phy(sc, addr, data | 0x10000)); |
2756 | } |
2757 | |
2758 | usbd_status |
2759 | urtw_8225_setgain(struct urtw_softc *sc, int16_t gain) |
2760 | { |
2761 | usbd_status error; |
2762 | |
2763 | urtw_8187_write_phy_ofdm(sc, 0x0d, urtw_8225_gain[gain * 4])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x0d, urtw_8225_gain [gain * 4]); if (error != 0) goto fail; } while (0); |
2764 | urtw_8187_write_phy_ofdm(sc, 0x1b, urtw_8225_gain[gain * 4 + 2])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x1b, urtw_8225_gain [gain * 4 + 2]); if (error != 0) goto fail; } while (0); |
2765 | urtw_8187_write_phy_ofdm(sc, 0x1d, urtw_8225_gain[gain * 4 + 3])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x1d, urtw_8225_gain [gain * 4 + 3]); if (error != 0) goto fail; } while (0); |
2766 | urtw_8187_write_phy_ofdm(sc, 0x23, urtw_8225_gain[gain * 4 + 1])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x23, urtw_8225_gain [gain * 4 + 1]); if (error != 0) goto fail; } while (0); |
2767 | fail: |
2768 | return (error); |
2769 | } |
2770 | |
2771 | usbd_status |
2772 | urtw_8225_set_txpwrlvl(struct urtw_softc *sc, int chan) |
2773 | { |
2774 | int i, idx, set; |
2775 | uint8_t *cck_pwltable; |
2776 | uint8_t cck_pwrlvl_max, ofdm_pwrlvl_min, ofdm_pwrlvl_max; |
2777 | uint8_t cck_pwrlvl = sc->sc_txpwr_cck[chan] & 0xff; |
2778 | uint8_t ofdm_pwrlvl = sc->sc_txpwr_ofdm[chan] & 0xff; |
2779 | usbd_status error; |
2780 | |
2781 | cck_pwrlvl_max = 11; |
2782 | ofdm_pwrlvl_max = 25; /* 12 -> 25 */ |
2783 | ofdm_pwrlvl_min = 10; |
2784 | |
2785 | /* CCK power setting */ |
2786 | cck_pwrlvl = (cck_pwrlvl > cck_pwrlvl_max) ? cck_pwrlvl_max : cck_pwrlvl; |
2787 | idx = cck_pwrlvl % 6; |
2788 | set = cck_pwrlvl / 6; |
2789 | cck_pwltable = (chan == 14) ? urtw_8225_txpwr_cck_ch14 : |
2790 | urtw_8225_txpwr_cck; |
2791 | |
2792 | urtw_write8_m(sc, URTW_TX_GAIN_CCK,do { error = urtw_write8_c(sc, 0x009d, urtw_8225_tx_gain_cck_ofdm [set] >> 1, 0); if (error != 0) goto fail; } while (0) |
2793 | urtw_8225_tx_gain_cck_ofdm[set] >> 1)do { error = urtw_write8_c(sc, 0x009d, urtw_8225_tx_gain_cck_ofdm [set] >> 1, 0); if (error != 0) goto fail; } while (0); |
2794 | for (i = 0; i < 8; i++) { |
2795 | urtw_8187_write_phy_cck(sc, 0x44 + i,do { error = urtw_8187_write_phy_cck_c(sc, 0x44 + i, cck_pwltable [idx * 8 + i]); if (error != 0) goto fail; } while (0) |
2796 | cck_pwltable[idx * 8 + i])do { error = urtw_8187_write_phy_cck_c(sc, 0x44 + i, cck_pwltable [idx * 8 + i]); if (error != 0) goto fail; } while (0); |
2797 | } |
2798 | usbd_delay_ms(sc->sc_udev, 1); |
2799 | |
2800 | /* OFDM power setting */ |
2801 | ofdm_pwrlvl = (ofdm_pwrlvl > (ofdm_pwrlvl_max - ofdm_pwrlvl_min)) ? |
2802 | ofdm_pwrlvl_max : ofdm_pwrlvl + ofdm_pwrlvl_min; |
2803 | ofdm_pwrlvl = (ofdm_pwrlvl > 35) ? 35 : ofdm_pwrlvl; |
2804 | |
2805 | idx = ofdm_pwrlvl % 6; |
2806 | set = ofdm_pwrlvl / 6; |
2807 | |
2808 | error = urtw_8185_set_anaparam2(sc, URTW_8187_8225_ANAPARAM2_ON(0x860c7312)); |
2809 | if (error) |
2810 | goto fail; |
2811 | urtw_8187_write_phy_ofdm(sc, 2, 0x42)do { error = urtw_8187_write_phy_ofdm_c(sc, 2, 0x42); if (error != 0) goto fail; } while (0); |
2812 | urtw_8187_write_phy_ofdm(sc, 6, 0)do { error = urtw_8187_write_phy_ofdm_c(sc, 6, 0); if (error != 0) goto fail; } while (0); |
2813 | urtw_8187_write_phy_ofdm(sc, 8, 0)do { error = urtw_8187_write_phy_ofdm_c(sc, 8, 0); if (error != 0) goto fail; } while (0); |
2814 | |
2815 | urtw_write8_m(sc, URTW_TX_GAIN_OFDM,do { error = urtw_write8_c(sc, 0x009e, urtw_8225_tx_gain_cck_ofdm [set] >> 1, 0); if (error != 0) goto fail; } while (0) |
2816 | urtw_8225_tx_gain_cck_ofdm[set] >> 1)do { error = urtw_write8_c(sc, 0x009e, urtw_8225_tx_gain_cck_ofdm [set] >> 1, 0); if (error != 0) goto fail; } while (0); |
2817 | urtw_8187_write_phy_ofdm(sc, 0x5, urtw_8225_txpwr_ofdm[idx])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x5, urtw_8225_txpwr_ofdm [idx]); if (error != 0) goto fail; } while (0); |
2818 | urtw_8187_write_phy_ofdm(sc, 0x7, urtw_8225_txpwr_ofdm[idx])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x7, urtw_8225_txpwr_ofdm [idx]); if (error != 0) goto fail; } while (0); |
2819 | usbd_delay_ms(sc->sc_udev, 1); |
2820 | fail: |
2821 | return (error); |
2822 | } |
2823 | |
2824 | usbd_status |
2825 | urtw_8185_tx_antenna(struct urtw_softc *sc, uint8_t ant) |
2826 | { |
2827 | usbd_status error; |
2828 | |
2829 | urtw_write8_m(sc, URTW_TX_ANTENNA, ant)do { error = urtw_write8_c(sc, 0x009f, ant, 0); if (error != 0 ) goto fail; } while (0); |
2830 | usbd_delay_ms(sc->sc_udev, 1); |
2831 | fail: |
2832 | return (error); |
2833 | } |
2834 | |
2835 | usbd_status |
2836 | urtw_8225_rf_init(struct urtw_rf *rf) |
2837 | { |
2838 | struct urtw_softc *sc = rf->rf_sc; |
2839 | int i; |
2840 | uint16_t data; |
2841 | usbd_status error; |
2842 | |
2843 | error = urtw_8180_set_anaparam(sc, URTW_8187_8225_ANAPARAM_ON(0xa0000a59)); |
2844 | if (error) |
2845 | goto fail; |
2846 | |
2847 | error = urtw_8225_usb_init(sc); |
2848 | if (error) |
2849 | goto fail; |
2850 | |
2851 | urtw_write32_m(sc, URTW_RF_TIMING, 0x000a8008)do { error = urtw_write32_c(sc, 0x008c, 0x000a8008, 0); if (error != 0) goto fail; } while (0); |
2852 | urtw_read16_m(sc, URTW_8187_BRSR, &data)do { error = urtw_read16_c(sc, 0x002c, &data, 0); if (error != 0) goto fail; } while (0); /* XXX ??? */ |
2853 | urtw_write16_m(sc, URTW_8187_BRSR, 0xffff)do { error = urtw_write16_c(sc, 0x002c, 0xffff, 0); if (error != 0) goto fail; } while (0); |
2854 | urtw_write32_m(sc, URTW_RF_PARA, 0x100044)do { error = urtw_write32_c(sc, 0x0088, 0x100044, 0); if (error != 0) goto fail; } while (0); |
2855 | |
2856 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
2857 | if (error) |
2858 | goto fail; |
2859 | urtw_write8_m(sc, URTW_CONFIG3, 0x44)do { error = urtw_write8_c(sc, 0x0059, 0x44, 0); if (error != 0) goto fail; } while (0); |
2860 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
2861 | if (error) |
2862 | goto fail; |
2863 | |
2864 | error = urtw_8185_rf_pins_enable(sc); |
2865 | if (error) |
2866 | goto fail; |
2867 | |
2868 | usbd_delay_ms(sc->sc_udev, 500); |
2869 | |
2870 | for (i = 0; i < nitems(urtw_8225_rf_part1)(sizeof((urtw_8225_rf_part1)) / sizeof((urtw_8225_rf_part1)[0 ])); i++) { |
2871 | urtw_8225_write(sc, urtw_8225_rf_part1[i].reg,do { error = urtw_8225_write_c(sc, urtw_8225_rf_part1[i].reg, urtw_8225_rf_part1[i].val); if (error != 0) goto fail; } while (0) |
2872 | urtw_8225_rf_part1[i].val)do { error = urtw_8225_write_c(sc, urtw_8225_rf_part1[i].reg, urtw_8225_rf_part1[i].val); if (error != 0) goto fail; } while (0); |
2873 | } |
2874 | usbd_delay_ms(sc->sc_udev, 50); |
2875 | urtw_8225_write(sc, 0x2, 0xc4d)do { error = urtw_8225_write_c(sc, 0x2, 0xc4d); if (error != 0 ) goto fail; } while (0); |
2876 | usbd_delay_ms(sc->sc_udev, 200); |
2877 | urtw_8225_write(sc, 0x2, 0x44d)do { error = urtw_8225_write_c(sc, 0x2, 0x44d); if (error != 0 ) goto fail; } while (0); |
2878 | usbd_delay_ms(sc->sc_udev, 200); |
2879 | urtw_8225_write(sc, 0x0, 0x127)do { error = urtw_8225_write_c(sc, 0x0, 0x127); if (error != 0 ) goto fail; } while (0); |
2880 | |
2881 | for (i = 0; i < nitems(urtw_8225_rxgain)(sizeof((urtw_8225_rxgain)) / sizeof((urtw_8225_rxgain)[0])); i++) { |
2882 | urtw_8225_write(sc, 0x1, (uint8_t)(i + 1))do { error = urtw_8225_write_c(sc, 0x1, (uint8_t)(i + 1)); if (error != 0) goto fail; } while (0); |
2883 | urtw_8225_write(sc, 0x2, urtw_8225_rxgain[i])do { error = urtw_8225_write_c(sc, 0x2, urtw_8225_rxgain[i]); if (error != 0) goto fail; } while (0); |
2884 | } |
2885 | |
2886 | urtw_8225_write(sc, 0x0, 0x27)do { error = urtw_8225_write_c(sc, 0x0, 0x27); if (error != 0 ) goto fail; } while (0); |
2887 | urtw_8225_write(sc, 0x0, 0x22f)do { error = urtw_8225_write_c(sc, 0x0, 0x22f); if (error != 0 ) goto fail; } while (0); |
2888 | |
2889 | for (i = 0; i < nitems(urtw_8225_agc)(sizeof((urtw_8225_agc)) / sizeof((urtw_8225_agc)[0])); i++) { |
2890 | urtw_8187_write_phy_ofdm(sc, 0xb, urtw_8225_agc[i])do { error = urtw_8187_write_phy_ofdm_c(sc, 0xb, urtw_8225_agc [i]); if (error != 0) goto fail; } while (0); |
2891 | urtw_8187_write_phy_ofdm(sc, 0xa, (uint8_t)i + 0x80)do { error = urtw_8187_write_phy_ofdm_c(sc, 0xa, (uint8_t)i + 0x80); if (error != 0) goto fail; } while (0); |
2892 | } |
2893 | |
2894 | for (i = 0; i < nitems(urtw_8225_rf_part2)(sizeof((urtw_8225_rf_part2)) / sizeof((urtw_8225_rf_part2)[0 ])); i++) { |
2895 | urtw_8187_write_phy_ofdm(sc, urtw_8225_rf_part2[i].reg,do { error = urtw_8187_write_phy_ofdm_c(sc, urtw_8225_rf_part2 [i].reg, urtw_8225_rf_part2[i].val); if (error != 0) goto fail ; } while (0) |
2896 | urtw_8225_rf_part2[i].val)do { error = urtw_8187_write_phy_ofdm_c(sc, urtw_8225_rf_part2 [i].reg, urtw_8225_rf_part2[i].val); if (error != 0) goto fail ; } while (0); |
2897 | usbd_delay_ms(sc->sc_udev, 1); |
2898 | } |
2899 | |
2900 | error = urtw_8225_setgain(sc, 4); |
2901 | if (error) |
2902 | goto fail; |
2903 | |
2904 | for (i = 0; i < nitems(urtw_8225_rf_part3)(sizeof((urtw_8225_rf_part3)) / sizeof((urtw_8225_rf_part3)[0 ])); i++) { |
2905 | urtw_8187_write_phy_cck(sc, urtw_8225_rf_part3[i].reg,do { error = urtw_8187_write_phy_cck_c(sc, urtw_8225_rf_part3 [i].reg, urtw_8225_rf_part3[i].val); if (error != 0) goto fail ; } while (0) |
2906 | urtw_8225_rf_part3[i].val)do { error = urtw_8187_write_phy_cck_c(sc, urtw_8225_rf_part3 [i].reg, urtw_8225_rf_part3[i].val); if (error != 0) goto fail ; } while (0); |
2907 | usbd_delay_ms(sc->sc_udev, 1); |
2908 | } |
2909 | |
2910 | urtw_write8_m(sc, 0x5b, 0x0d)do { error = urtw_write8_c(sc, 0x5b, 0x0d, 0); if (error != 0 ) goto fail; } while (0); |
2911 | |
2912 | error = urtw_8225_set_txpwrlvl(sc, 1); |
2913 | if (error) |
2914 | goto fail; |
2915 | |
2916 | urtw_8187_write_phy_cck(sc, 0x10, 0x9b)do { error = urtw_8187_write_phy_cck_c(sc, 0x10, 0x9b); if (error != 0) goto fail; } while (0); |
2917 | usbd_delay_ms(sc->sc_udev, 1); |
2918 | urtw_8187_write_phy_ofdm(sc, 0x26, 0x90)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x26, 0x90); if ( error != 0) goto fail; } while (0); |
2919 | usbd_delay_ms(sc->sc_udev, 1); |
2920 | |
2921 | /* TX ant A, 0x0 for B */ |
2922 | error = urtw_8185_tx_antenna(sc, 0x3); |
2923 | if (error) |
2924 | goto fail; |
2925 | urtw_write32_m(sc, 0x94, 0x3dc00002)do { error = urtw_write32_c(sc, 0x94, 0x3dc00002, 0); if (error != 0) goto fail; } while (0); |
2926 | |
2927 | error = urtw_8225_rf_set_chan(rf, 1); |
2928 | fail: |
2929 | return (error); |
2930 | } |
2931 | |
2932 | usbd_status |
2933 | urtw_8225_rf_set_chan(struct urtw_rf *rf, int chan) |
2934 | { |
2935 | struct urtw_softc *sc = rf->rf_sc; |
2936 | struct ieee80211com *ic = &sc->sc_ic; |
2937 | struct ieee80211_channel *c = ic->ic_ibss_chan; |
2938 | usbd_status error; |
2939 | |
2940 | error = urtw_8225_set_txpwrlvl(sc, chan); |
2941 | if (error) |
2942 | goto fail; |
2943 | urtw_8225_write(sc, 0x7, urtw_8225_channel[chan])do { error = urtw_8225_write_c(sc, 0x7, urtw_8225_channel[chan ]); if (error != 0) goto fail; } while (0); |
2944 | usbd_delay_ms(sc->sc_udev, 10); |
2945 | |
2946 | urtw_write8_m(sc, URTW_SIFS, 0x22)do { error = urtw_write8_c(sc, 0x00b4, 0x22, 0); if (error != 0) goto fail; } while (0); |
2947 | |
2948 | if (sc->sc_state == IEEE80211_S_ASSOC && |
2949 | ic->ic_flags & IEEE80211_F_SHSLOT0x00020000) |
2950 | urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_DS_SHSLOT)do { error = urtw_write8_c(sc, 0x00b6, 9, 0); if (error != 0) goto fail; } while (0); |
2951 | else |
2952 | urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_DS_SLOT)do { error = urtw_write8_c(sc, 0x00b6, 20, 0); if (error != 0 ) goto fail; } while (0); |
2953 | |
2954 | if (IEEE80211_IS_CHAN_G(c)(((c)->ic_flags & (0x0080 | 0x0400)) == (0x0080 | 0x0400 ))) { |
2955 | urtw_write8_m(sc, URTW_DIFS, 0x14)do { error = urtw_write8_c(sc, 0x00b5, 0x14, 0); if (error != 0) goto fail; } while (0); |
2956 | urtw_write8_m(sc, URTW_8187_EIFS, 0x5b - 0x14)do { error = urtw_write8_c(sc, 0x0035, 0x5b - 0x14, 0); if (error != 0) goto fail; } while (0); |
2957 | urtw_write8_m(sc, URTW_CW_VAL, 0x73)do { error = urtw_write8_c(sc, 0x00bd, 0x73, 0); if (error != 0) goto fail; } while (0); |
2958 | } else { |
2959 | urtw_write8_m(sc, URTW_DIFS, 0x24)do { error = urtw_write8_c(sc, 0x00b5, 0x24, 0); if (error != 0) goto fail; } while (0); |
2960 | urtw_write8_m(sc, URTW_8187_EIFS, 0x5b - 0x24)do { error = urtw_write8_c(sc, 0x0035, 0x5b - 0x24, 0); if (error != 0) goto fail; } while (0); |
2961 | urtw_write8_m(sc, URTW_CW_VAL, 0xa5)do { error = urtw_write8_c(sc, 0x00bd, 0xa5, 0); if (error != 0) goto fail; } while (0); |
2962 | } |
2963 | |
2964 | fail: |
2965 | return (error); |
2966 | } |
2967 | |
2968 | usbd_status |
2969 | urtw_8225_rf_set_sens(struct urtw_rf *rf) |
2970 | { |
2971 | struct urtw_softc *sc = rf->rf_sc; |
2972 | usbd_status error; |
2973 | |
2974 | if (rf->sens > 6) |
2975 | return (-1); |
2976 | |
2977 | if (rf->sens > 4) |
2978 | urtw_8225_write(sc, 0x0c, 0x850)do { error = urtw_8225_write_c(sc, 0x0c, 0x850); if (error != 0) goto fail; } while (0); |
2979 | else |
2980 | urtw_8225_write(sc, 0x0c, 0x50)do { error = urtw_8225_write_c(sc, 0x0c, 0x50); if (error != 0 ) goto fail; } while (0); |
2981 | |
2982 | rf->sens = 6 - rf->sens; |
2983 | error = urtw_8225_setgain(sc, rf->sens); |
2984 | if (error) |
2985 | goto fail; |
2986 | |
2987 | urtw_8187_write_phy_cck(sc, 0x41, urtw_8225_threshold[rf->sens])do { error = urtw_8187_write_phy_cck_c(sc, 0x41, urtw_8225_threshold [rf->sens]); if (error != 0) goto fail; } while (0); |
2988 | |
2989 | fail: |
2990 | return (error); |
2991 | } |
2992 | |
2993 | void |
2994 | urtw_stop(struct ifnet *ifp, int disable) |
2995 | { |
2996 | struct urtw_softc *sc = ifp->if_softc; |
2997 | struct ieee80211com *ic = &sc->sc_ic; |
2998 | uint8_t data; |
2999 | usbd_status error; |
3000 | |
3001 | ifp->if_flags &= ~IFF_RUNNING0x40; |
3002 | ifq_clr_oactive(&ifp->if_snd); |
3003 | |
3004 | ieee80211_new_state(ic, IEEE80211_S_INIT, -1)(((ic)->ic_newstate)((ic), (IEEE80211_S_INIT), (-1))); |
3005 | |
3006 | timeout_del(&sc->scan_to); |
3007 | timeout_del(&sc->sc_led_ch); |
3008 | |
3009 | urtw_intr_disable(sc); |
3010 | urtw_read8_m(sc, URTW_CMD, &data)do { error = urtw_read8_c(sc, 0x0037, &data, 0); if (error != 0) goto fail; } while (0); |
3011 | data &= ~URTW_CMD_TX_ENABLE(0x4); |
3012 | data &= ~URTW_CMD_RX_ENABLE(0x8); |
3013 | urtw_write8_m(sc, URTW_CMD, data)do { error = urtw_write8_c(sc, 0x0037, data, 0); if (error != 0) goto fail; } while (0); |
3014 | |
3015 | if (sc->sc_rxpipe != NULL((void *)0)) |
3016 | usbd_abort_pipe(sc->sc_rxpipe); |
3017 | if (sc->sc_txpipe_low != NULL((void *)0)) |
3018 | usbd_abort_pipe(sc->sc_txpipe_low); |
3019 | if (sc->sc_txpipe_normal != NULL((void *)0)) |
3020 | usbd_abort_pipe(sc->sc_txpipe_normal); |
3021 | |
3022 | fail: |
3023 | return; |
3024 | } |
3025 | |
3026 | int |
3027 | urtw_isbmode(uint16_t rate) |
3028 | { |
3029 | rate = urtw_rtl2rate(rate); |
3030 | |
3031 | return (((rate <= 22 && rate != 12 && rate != 18) || |
3032 | rate == 44) ? (1) : (0)); |
3033 | } |
3034 | |
3035 | void |
3036 | urtw_rxeof(struct usbd_xfer *xfer, void *priv, usbd_status status) |
3037 | { |
3038 | struct urtw_rx_data *data = priv; |
3039 | struct urtw_softc *sc = data->sc; |
3040 | struct ieee80211com *ic = &sc->sc_ic; |
3041 | struct ifnet *ifp = &ic->ic_ific_ac.ac_if; |
3042 | struct ieee80211_frame *wh; |
3043 | struct ieee80211_node *ni; |
3044 | struct ieee80211_rxinfo rxi; |
3045 | struct mbuf *m, *mnew; |
3046 | uint8_t *desc, quality, rate; |
3047 | int actlen, flen, len, nf, rssi, s; |
3048 | |
3049 | if (status != USBD_NORMAL_COMPLETION) { |
3050 | if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) |
3051 | return; |
3052 | |
3053 | if (status == USBD_STALLED) |
3054 | usbd_clear_endpoint_stall_async(sc->sc_rxpipe); |
3055 | ifp->if_ierrorsif_data.ifi_ierrors++; |
3056 | goto skip; |
3057 | } |
3058 | |
3059 | usbd_get_xfer_status(xfer, NULL((void *)0), NULL((void *)0), &actlen, NULL((void *)0)); |
3060 | if (actlen < URTW_MIN_RXBUFSZ(sizeof(struct ieee80211_frame_min))) { |
3061 | ifp->if_ierrorsif_data.ifi_ierrors++; |
3062 | goto skip; |
3063 | } |
3064 | |
3065 | if (sc->sc_hwrev & URTW_HWREV_81870x01) |
3066 | /* 4 dword and 4 byte CRC */ |
3067 | len = actlen - (4 * 4); |
3068 | else |
3069 | /* 5 dword and 4 byte CRC */ |
3070 | len = actlen - (4 * 5); |
3071 | |
3072 | desc = data->buf + len; |
3073 | flen = ((desc[1] & 0x0f) << 8) + (desc[0] & 0xff); |
3074 | if (flen > actlen) { |
3075 | ifp->if_ierrorsif_data.ifi_ierrors++; |
3076 | goto skip; |
3077 | } |
3078 | |
3079 | rate = (desc[2] & 0xf0) >> 4; |
3080 | if (sc->sc_hwrev & URTW_HWREV_81870x01) { |
3081 | quality = desc[4] & 0xff; |
3082 | rssi = (desc[6] & 0xfe) >> 1; |
3083 | |
3084 | /* XXX correct? */ |
3085 | if (!urtw_isbmode(rate)) { |
3086 | rssi = (rssi > 90) ? 90 : ((rssi < 25) ? 25 : rssi); |
3087 | rssi = ((90 - rssi) * 100) / 65; |
3088 | } else { |
3089 | rssi = (rssi > 90) ? 95 : ((rssi < 30) ? 30 : rssi); |
3090 | rssi = ((95 - rssi) * 100) / 65; |
3091 | } |
3092 | } else { |
3093 | quality = desc[12]; |
3094 | rssi = 14 - desc[14] / 2; |
3095 | } |
3096 | |
3097 | MGETHDR(mnew, M_DONTWAIT, MT_DATA)mnew = m_gethdr((0x0002), (1)); |
3098 | if (mnew == NULL((void *)0)) { |
3099 | printf("%s: could not allocate rx mbuf\n", |
3100 | sc->sc_dev.dv_xname); |
3101 | ifp->if_ierrorsif_data.ifi_ierrors++; |
3102 | goto skip; |
3103 | } |
3104 | MCLGET(mnew, M_DONTWAIT)(void) m_clget((mnew), (0x0002), (1 << 11)); |
3105 | if (!(mnew->m_flagsm_hdr.mh_flags & M_EXT0x0001)) { |
3106 | printf("%s: could not allocate rx mbuf cluster\n", |
3107 | sc->sc_dev.dv_xname); |
3108 | m_freem(mnew); |
3109 | ifp->if_ierrorsif_data.ifi_ierrors++; |
3110 | goto skip; |
3111 | } |
3112 | |
3113 | m = data->m; |
3114 | data->m = mnew; |
3115 | data->buf = mtod(mnew, uint8_t *)((uint8_t *)((mnew)->m_hdr.mh_data)); |
3116 | |
3117 | /* finalize mbuf */ |
3118 | m->m_pkthdrM_dat.MH.MH_pkthdr.len = m->m_lenm_hdr.mh_len = flen - 4; |
3119 | |
3120 | s = splnet()splraise(0x7); |
3121 | |
3122 | #if NBPFILTER1 > 0 |
3123 | if (sc->sc_drvbpf != NULL((void *)0)) { |
3124 | struct mbuf mb; |
3125 | struct urtw_rx_radiotap_header *tap = &sc->sc_rxtapsc_rxtapu.th; |
3126 | |
3127 | /* XXX Are variables correct? */ |
3128 | tap->wr_chan_freq = htole16(ic->ic_ibss_chan->ic_freq)((__uint16_t)(ic->ic_ibss_chan->ic_freq)); |
3129 | tap->wr_chan_flags = htole16(ic->ic_ibss_chan->ic_flags)((__uint16_t)(ic->ic_ibss_chan->ic_flags)); |
3130 | tap->wr_dbm_antsignal = (int8_t)rssi; |
3131 | |
3132 | mb.m_datam_hdr.mh_data = (caddr_t)tap; |
3133 | mb.m_lenm_hdr.mh_len = sc->sc_rxtap_len; |
3134 | mb.m_nextm_hdr.mh_next = m; |
3135 | mb.m_nextpktm_hdr.mh_nextpkt = NULL((void *)0); |
3136 | mb.m_typem_hdr.mh_type = 0; |
3137 | mb.m_flagsm_hdr.mh_flags = 0; |
3138 | bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_IN(1 << 0)); |
3139 | } |
3140 | #endif |
3141 | wh = mtod(m, struct ieee80211_frame *)((struct ieee80211_frame *)((m)->m_hdr.mh_data)); |
3142 | if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK0x0c) == IEEE80211_FC0_TYPE_DATA0x08) |
3143 | sc->sc_currate = (rate > 0) ? rate : sc->sc_currate; |
3144 | ni = ieee80211_find_rxnode(ic, wh); |
3145 | |
3146 | /* XXX correct? */ |
3147 | if (!urtw_isbmode(rate)) { |
3148 | if (quality > 127) |
3149 | quality = 0; |
3150 | else if (quality < 27) |
3151 | quality = 100; |
3152 | else |
3153 | quality = 127 - quality; |
3154 | } else |
3155 | quality = (quality > 64) ? 0 : ((64 - quality) * 100) / 64; |
3156 | |
3157 | nf = quality; |
3158 | |
3159 | /* send the frame to the 802.11 layer */ |
3160 | rxi.rxi_flags = 0; |
3161 | rxi.rxi_rssi = rssi; |
3162 | rxi.rxi_tstamp = 0; |
3163 | ieee80211_input(ifp, m, ni, &rxi); |
3164 | |
3165 | /* node is no longer needed */ |
3166 | ieee80211_release_node(ic, ni); |
3167 | |
3168 | splx(s)spllower(s); |
3169 | |
3170 | skip: /* setup a new transfer */ |
3171 | usbd_setup_xfer(xfer, sc->sc_rxpipe, data, data->buf, MCLBYTES(1 << 11), |
3172 | USBD_SHORT_XFER_OK0x04, USBD_NO_TIMEOUT0, urtw_rxeof); |
3173 | (void)usbd_transfer(xfer); |
3174 | } |
3175 | |
3176 | usbd_status |
3177 | urtw_8225v2_setgain(struct urtw_softc *sc, int16_t gain) |
3178 | { |
3179 | uint8_t *gainp; |
3180 | usbd_status error; |
3181 | |
3182 | /* XXX for A? */ |
3183 | gainp = urtw_8225v2_gain_bg; |
3184 | urtw_8187_write_phy_ofdm(sc, 0x0d, gainp[gain * 3])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x0d, gainp[gain * 3]); if (error != 0) goto fail; } while (0); |
3185 | usbd_delay_ms(sc->sc_udev, 1); |
3186 | urtw_8187_write_phy_ofdm(sc, 0x1b, gainp[gain * 3 + 1])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x1b, gainp[gain * 3 + 1]); if (error != 0) goto fail; } while (0); |
3187 | usbd_delay_ms(sc->sc_udev, 1); |
3188 | urtw_8187_write_phy_ofdm(sc, 0x1d, gainp[gain * 3 + 2])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x1d, gainp[gain * 3 + 2]); if (error != 0) goto fail; } while (0); |
3189 | usbd_delay_ms(sc->sc_udev, 1); |
3190 | urtw_8187_write_phy_ofdm(sc, 0x21, 0x17)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x21, 0x17); if ( error != 0) goto fail; } while (0); |
3191 | usbd_delay_ms(sc->sc_udev, 1); |
3192 | fail: |
3193 | return (error); |
3194 | } |
3195 | |
3196 | usbd_status |
3197 | urtw_8225v2_set_txpwrlvl(struct urtw_softc *sc, int chan) |
3198 | { |
3199 | int i; |
3200 | uint8_t *cck_pwrtable; |
3201 | uint8_t cck_pwrlvl_max = 15, ofdm_pwrlvl_max = 25, ofdm_pwrlvl_min = 10; |
3202 | uint8_t cck_pwrlvl = sc->sc_txpwr_cck[chan] & 0xff; |
3203 | uint8_t ofdm_pwrlvl = sc->sc_txpwr_ofdm[chan] & 0xff; |
3204 | usbd_status error; |
3205 | |
3206 | /* CCK power setting */ |
3207 | cck_pwrlvl = (cck_pwrlvl > cck_pwrlvl_max) ? cck_pwrlvl_max : cck_pwrlvl; |
3208 | cck_pwrlvl += sc->sc_txpwr_cck_base; |
3209 | cck_pwrlvl = (cck_pwrlvl > 35) ? 35 : cck_pwrlvl; |
3210 | cck_pwrtable = (chan == 14) ? urtw_8225v2_txpwr_cck_ch14 : |
3211 | urtw_8225v2_txpwr_cck; |
3212 | |
3213 | for (i = 0; i < 8; i++) { |
3214 | urtw_8187_write_phy_cck(sc, 0x44 + i, cck_pwrtable[i])do { error = urtw_8187_write_phy_cck_c(sc, 0x44 + i, cck_pwrtable [i]); if (error != 0) goto fail; } while (0); |
3215 | } |
3216 | urtw_write8_m(sc, URTW_TX_GAIN_CCK,do { error = urtw_write8_c(sc, 0x009d, urtw_8225v2_tx_gain_cck_ofdm [cck_pwrlvl], 0); if (error != 0) goto fail; } while (0) |
3217 | urtw_8225v2_tx_gain_cck_ofdm[cck_pwrlvl])do { error = urtw_write8_c(sc, 0x009d, urtw_8225v2_tx_gain_cck_ofdm [cck_pwrlvl], 0); if (error != 0) goto fail; } while (0); |
3218 | usbd_delay_ms(sc->sc_udev, 1); |
3219 | |
3220 | /* OFDM power setting */ |
3221 | ofdm_pwrlvl = (ofdm_pwrlvl > (ofdm_pwrlvl_max - ofdm_pwrlvl_min)) ? |
3222 | ofdm_pwrlvl_max : ofdm_pwrlvl + ofdm_pwrlvl_min; |
3223 | ofdm_pwrlvl += sc->sc_txpwr_ofdm_base; |
3224 | ofdm_pwrlvl = (ofdm_pwrlvl > 35) ? 35 : ofdm_pwrlvl; |
3225 | |
3226 | error = urtw_8185_set_anaparam2(sc, URTW_8187_8225_ANAPARAM2_ON(0x860c7312)); |
3227 | if (error) |
3228 | goto fail; |
3229 | |
3230 | urtw_8187_write_phy_ofdm(sc, 2, 0x42)do { error = urtw_8187_write_phy_ofdm_c(sc, 2, 0x42); if (error != 0) goto fail; } while (0); |
3231 | urtw_8187_write_phy_ofdm(sc, 5, 0x0)do { error = urtw_8187_write_phy_ofdm_c(sc, 5, 0x0); if (error != 0) goto fail; } while (0); |
3232 | urtw_8187_write_phy_ofdm(sc, 6, 0x40)do { error = urtw_8187_write_phy_ofdm_c(sc, 6, 0x40); if (error != 0) goto fail; } while (0); |
3233 | urtw_8187_write_phy_ofdm(sc, 7, 0x0)do { error = urtw_8187_write_phy_ofdm_c(sc, 7, 0x0); if (error != 0) goto fail; } while (0); |
3234 | urtw_8187_write_phy_ofdm(sc, 8, 0x40)do { error = urtw_8187_write_phy_ofdm_c(sc, 8, 0x40); if (error != 0) goto fail; } while (0); |
3235 | |
3236 | urtw_write8_m(sc, URTW_TX_GAIN_OFDM,do { error = urtw_write8_c(sc, 0x009e, urtw_8225v2_tx_gain_cck_ofdm [ofdm_pwrlvl], 0); if (error != 0) goto fail; } while (0) |
3237 | urtw_8225v2_tx_gain_cck_ofdm[ofdm_pwrlvl])do { error = urtw_write8_c(sc, 0x009e, urtw_8225v2_tx_gain_cck_ofdm [ofdm_pwrlvl], 0); if (error != 0) goto fail; } while (0); |
3238 | usbd_delay_ms(sc->sc_udev, 1); |
3239 | fail: |
3240 | return (error); |
3241 | } |
3242 | |
3243 | usbd_status |
3244 | urtw_8225v2_rf_init(struct urtw_rf *rf) |
3245 | { |
3246 | struct urtw_softc *sc = rf->rf_sc; |
3247 | int i; |
3248 | uint16_t data; |
3249 | uint32_t data32; |
3250 | usbd_status error; |
3251 | |
3252 | error = urtw_8180_set_anaparam(sc, URTW_8187_8225_ANAPARAM_ON(0xa0000a59)); |
3253 | if (error) |
3254 | goto fail; |
3255 | |
3256 | error = urtw_8225_usb_init(sc); |
3257 | if (error) |
3258 | goto fail; |
3259 | |
3260 | urtw_write32_m(sc, URTW_RF_TIMING, 0x000a8008)do { error = urtw_write32_c(sc, 0x008c, 0x000a8008, 0); if (error != 0) goto fail; } while (0); |
3261 | urtw_read16_m(sc, URTW_8187_BRSR, &data)do { error = urtw_read16_c(sc, 0x002c, &data, 0); if (error != 0) goto fail; } while (0); /* XXX ??? */ |
3262 | urtw_write16_m(sc, URTW_8187_BRSR, 0xffff)do { error = urtw_write16_c(sc, 0x002c, 0xffff, 0); if (error != 0) goto fail; } while (0); |
3263 | urtw_write32_m(sc, URTW_RF_PARA, 0x100044)do { error = urtw_write32_c(sc, 0x0088, 0x100044, 0); if (error != 0) goto fail; } while (0); |
3264 | |
3265 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
3266 | if (error) |
3267 | goto fail; |
3268 | urtw_write8_m(sc, URTW_CONFIG3, 0x44)do { error = urtw_write8_c(sc, 0x0059, 0x44, 0); if (error != 0) goto fail; } while (0); |
3269 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
3270 | if (error) |
3271 | goto fail; |
3272 | |
3273 | error = urtw_8185_rf_pins_enable(sc); |
3274 | if (error) |
3275 | goto fail; |
3276 | |
3277 | usbd_delay_ms(sc->sc_udev, 1000); |
3278 | |
3279 | for (i = 0; i < nitems(urtw_8225v2_rf_part1)(sizeof((urtw_8225v2_rf_part1)) / sizeof((urtw_8225v2_rf_part1 )[0])); i++) { |
3280 | urtw_8225_write(sc, urtw_8225v2_rf_part1[i].reg,do { error = urtw_8225_write_c(sc, urtw_8225v2_rf_part1[i].reg , urtw_8225v2_rf_part1[i].val); if (error != 0) goto fail; } while (0) |
3281 | urtw_8225v2_rf_part1[i].val)do { error = urtw_8225_write_c(sc, urtw_8225v2_rf_part1[i].reg , urtw_8225v2_rf_part1[i].val); if (error != 0) goto fail; } while (0); |
3282 | usbd_delay_ms(sc->sc_udev, 1); |
3283 | } |
3284 | usbd_delay_ms(sc->sc_udev, 50); |
3285 | |
3286 | urtw_8225_write(sc, 0x0, 0x1b7)do { error = urtw_8225_write_c(sc, 0x0, 0x1b7); if (error != 0 ) goto fail; } while (0); |
3287 | |
3288 | for (i = 0; i < nitems(urtw_8225v2_rxgain)(sizeof((urtw_8225v2_rxgain)) / sizeof((urtw_8225v2_rxgain)[0 ])); i++) { |
3289 | urtw_8225_write(sc, 0x1, (uint8_t)(i + 1))do { error = urtw_8225_write_c(sc, 0x1, (uint8_t)(i + 1)); if (error != 0) goto fail; } while (0); |
3290 | urtw_8225_write(sc, 0x2, urtw_8225v2_rxgain[i])do { error = urtw_8225_write_c(sc, 0x2, urtw_8225v2_rxgain[i] ); if (error != 0) goto fail; } while (0); |
3291 | } |
3292 | |
3293 | urtw_8225_write(sc, 0x3, 0x2)do { error = urtw_8225_write_c(sc, 0x3, 0x2); if (error != 0) goto fail; } while (0); |
3294 | urtw_8225_write(sc, 0x5, 0x4)do { error = urtw_8225_write_c(sc, 0x5, 0x4); if (error != 0) goto fail; } while (0); |
3295 | urtw_8225_write(sc, 0x0, 0xb7)do { error = urtw_8225_write_c(sc, 0x0, 0xb7); if (error != 0 ) goto fail; } while (0); |
3296 | urtw_8225_write(sc, 0x2, 0xc4d)do { error = urtw_8225_write_c(sc, 0x2, 0xc4d); if (error != 0 ) goto fail; } while (0); |
3297 | usbd_delay_ms(sc->sc_udev, 100); |
3298 | urtw_8225_write(sc, 0x2, 0x44d)do { error = urtw_8225_write_c(sc, 0x2, 0x44d); if (error != 0 ) goto fail; } while (0); |
3299 | usbd_delay_ms(sc->sc_udev, 100); |
3300 | |
3301 | error = urtw_8225_read(sc, 0x6, &data32); |
3302 | if (error != 0) |
3303 | goto fail; |
3304 | if (data32 != 0xe6) |
3305 | printf("%s: expect 0xe6!! (0x%x)\n", sc->sc_dev.dv_xname, |
3306 | data32); |
3307 | if (!(data32 & 0x80)) { |
3308 | urtw_8225_write(sc, 0x02, 0x0c4d)do { error = urtw_8225_write_c(sc, 0x02, 0x0c4d); if (error != 0) goto fail; } while (0); |
3309 | usbd_delay_ms(sc->sc_udev, 200); |
3310 | urtw_8225_write(sc, 0x02, 0x044d)do { error = urtw_8225_write_c(sc, 0x02, 0x044d); if (error != 0) goto fail; } while (0); |
3311 | usbd_delay_ms(sc->sc_udev, 100); |
3312 | error = urtw_8225_read(sc, 0x6, &data32); |
3313 | if (error != 0) |
3314 | goto fail; |
3315 | if (!(data32 & 0x80)) |
3316 | printf("%s: RF calibration failed\n", |
3317 | sc->sc_dev.dv_xname); |
3318 | } |
3319 | usbd_delay_ms(sc->sc_udev, 100); |
3320 | |
3321 | urtw_8225_write(sc, 0x0, 0x2bf)do { error = urtw_8225_write_c(sc, 0x0, 0x2bf); if (error != 0 ) goto fail; } while (0); |
3322 | for (i = 0; i < nitems(urtw_8225_agc)(sizeof((urtw_8225_agc)) / sizeof((urtw_8225_agc)[0])); i++) { |
3323 | urtw_8187_write_phy_ofdm(sc, 0xb, urtw_8225_agc[i])do { error = urtw_8187_write_phy_ofdm_c(sc, 0xb, urtw_8225_agc [i]); if (error != 0) goto fail; } while (0); |
3324 | urtw_8187_write_phy_ofdm(sc, 0xa, (uint8_t)i + 0x80)do { error = urtw_8187_write_phy_ofdm_c(sc, 0xa, (uint8_t)i + 0x80); if (error != 0) goto fail; } while (0); |
3325 | } |
3326 | |
3327 | for (i = 0; i < nitems(urtw_8225v2_rf_part2)(sizeof((urtw_8225v2_rf_part2)) / sizeof((urtw_8225v2_rf_part2 )[0])); i++) { |
3328 | urtw_8187_write_phy_ofdm(sc, urtw_8225v2_rf_part2[i].reg,do { error = urtw_8187_write_phy_ofdm_c(sc, urtw_8225v2_rf_part2 [i].reg, urtw_8225v2_rf_part2[i].val); if (error != 0) goto fail ; } while (0) |
3329 | urtw_8225v2_rf_part2[i].val)do { error = urtw_8187_write_phy_ofdm_c(sc, urtw_8225v2_rf_part2 [i].reg, urtw_8225v2_rf_part2[i].val); if (error != 0) goto fail ; } while (0); |
3330 | } |
3331 | |
3332 | error = urtw_8225v2_setgain(sc, 4); |
3333 | if (error) |
3334 | goto fail; |
3335 | |
3336 | for (i = 0; i < nitems(urtw_8225v2_rf_part3)(sizeof((urtw_8225v2_rf_part3)) / sizeof((urtw_8225v2_rf_part3 )[0])); i++) { |
3337 | urtw_8187_write_phy_cck(sc, urtw_8225v2_rf_part3[i].reg,do { error = urtw_8187_write_phy_cck_c(sc, urtw_8225v2_rf_part3 [i].reg, urtw_8225v2_rf_part3[i].val); if (error != 0) goto fail ; } while (0) |
3338 | urtw_8225v2_rf_part3[i].val)do { error = urtw_8187_write_phy_cck_c(sc, urtw_8225v2_rf_part3 [i].reg, urtw_8225v2_rf_part3[i].val); if (error != 0) goto fail ; } while (0); |
3339 | } |
3340 | |
3341 | urtw_write8_m(sc, 0x5b, 0x0d)do { error = urtw_write8_c(sc, 0x5b, 0x0d, 0); if (error != 0 ) goto fail; } while (0); |
3342 | |
3343 | error = urtw_8225v2_set_txpwrlvl(sc, 1); |
3344 | if (error) |
3345 | goto fail; |
3346 | |
3347 | urtw_8187_write_phy_cck(sc, 0x10, 0x9b)do { error = urtw_8187_write_phy_cck_c(sc, 0x10, 0x9b); if (error != 0) goto fail; } while (0); |
3348 | urtw_8187_write_phy_ofdm(sc, 0x26, 0x90)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x26, 0x90); if ( error != 0) goto fail; } while (0); |
3349 | |
3350 | /* TX ant A, 0x0 for B */ |
3351 | error = urtw_8185_tx_antenna(sc, 0x3); |
3352 | if (error) |
3353 | goto fail; |
3354 | urtw_write32_m(sc, 0x94, 0x3dc00002)do { error = urtw_write32_c(sc, 0x94, 0x3dc00002, 0); if (error != 0) goto fail; } while (0); |
3355 | |
3356 | error = urtw_8225_rf_set_chan(rf, 1); |
3357 | fail: |
3358 | return (error); |
3359 | } |
3360 | |
3361 | usbd_status |
3362 | urtw_8225v2_rf_set_chan(struct urtw_rf *rf, int chan) |
3363 | { |
3364 | struct urtw_softc *sc = rf->rf_sc; |
3365 | struct ieee80211com *ic = &sc->sc_ic; |
3366 | struct ieee80211_channel *c = ic->ic_ibss_chan; |
3367 | usbd_status error; |
3368 | |
3369 | error = urtw_8225v2_set_txpwrlvl(sc, chan); |
3370 | if (error) |
3371 | goto fail; |
3372 | |
3373 | urtw_8225_write(sc, 0x7, urtw_8225_channel[chan])do { error = urtw_8225_write_c(sc, 0x7, urtw_8225_channel[chan ]); if (error != 0) goto fail; } while (0); |
3374 | usbd_delay_ms(sc->sc_udev, 10); |
3375 | |
3376 | urtw_write8_m(sc, URTW_SIFS, 0x22)do { error = urtw_write8_c(sc, 0x00b4, 0x22, 0); if (error != 0) goto fail; } while (0); |
3377 | |
3378 | if(sc->sc_state == IEEE80211_S_ASSOC && |
3379 | ic->ic_flags & IEEE80211_F_SHSLOT0x00020000) |
3380 | urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_DS_SHSLOT)do { error = urtw_write8_c(sc, 0x00b6, 9, 0); if (error != 0) goto fail; } while (0); |
3381 | else |
3382 | urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_DS_SLOT)do { error = urtw_write8_c(sc, 0x00b6, 20, 0); if (error != 0 ) goto fail; } while (0); |
3383 | |
3384 | if (IEEE80211_IS_CHAN_G(c)(((c)->ic_flags & (0x0080 | 0x0400)) == (0x0080 | 0x0400 ))) { |
3385 | urtw_write8_m(sc, URTW_DIFS, 0x14)do { error = urtw_write8_c(sc, 0x00b5, 0x14, 0); if (error != 0) goto fail; } while (0); |
3386 | urtw_write8_m(sc, URTW_8187_EIFS, 0x5b - 0x14)do { error = urtw_write8_c(sc, 0x0035, 0x5b - 0x14, 0); if (error != 0) goto fail; } while (0); |
3387 | urtw_write8_m(sc, URTW_CW_VAL, 0x73)do { error = urtw_write8_c(sc, 0x00bd, 0x73, 0); if (error != 0) goto fail; } while (0); |
3388 | } else { |
3389 | urtw_write8_m(sc, URTW_DIFS, 0x24)do { error = urtw_write8_c(sc, 0x00b5, 0x24, 0); if (error != 0) goto fail; } while (0); |
3390 | urtw_write8_m(sc, URTW_8187_EIFS, 0x5b - 0x24)do { error = urtw_write8_c(sc, 0x0035, 0x5b - 0x24, 0); if (error != 0) goto fail; } while (0); |
3391 | urtw_write8_m(sc, URTW_CW_VAL, 0xa5)do { error = urtw_write8_c(sc, 0x00bd, 0xa5, 0); if (error != 0) goto fail; } while (0); |
3392 | } |
3393 | |
3394 | fail: |
3395 | return (error); |
3396 | } |
3397 | |
3398 | void |
3399 | urtw_set_chan(struct urtw_softc *sc, struct ieee80211_channel *c) |
3400 | { |
3401 | struct urtw_rf *rf = &sc->sc_rf; |
3402 | struct ieee80211com *ic = &sc->sc_ic; |
3403 | usbd_status error = 0; |
3404 | uint32_t data; |
3405 | u_int chan; |
3406 | |
3407 | chan = ieee80211_chan2ieee(ic, c); |
3408 | if (chan == 0 || chan == IEEE80211_CHAN_ANY0xffff) |
3409 | return; |
3410 | /* |
3411 | * During changing the channel we need to temporary disable |
3412 | * TX. |
3413 | */ |
3414 | urtw_read32_m(sc, URTW_TX_CONF, &data)do { error = urtw_read32_c(sc, 0x0040, &data, 0); if (error != 0) goto fail; } while (0); |
3415 | data &= ~URTW_TX_LOOPBACK_MASK(0x60000); |
3416 | urtw_write32_m(sc, URTW_TX_CONF, data | URTW_TX_LOOPBACK_MAC)do { error = urtw_write32_c(sc, 0x0040, data | (1 << (17 )), 0); if (error != 0) goto fail; } while (0); |
3417 | error = rf->set_chan(rf, chan); |
3418 | if (error != 0) { |
3419 | printf("%s could not change the channel\n", |
3420 | sc->sc_dev.dv_xname); |
3421 | return; |
3422 | } |
3423 | usbd_delay_ms(sc->sc_udev, 10); |
3424 | urtw_write32_m(sc, URTW_TX_CONF, data | URTW_TX_LOOPBACK_NONE)do { error = urtw_write32_c(sc, 0x0040, data | (0 << (17 )), 0); if (error != 0) goto fail; } while (0); |
3425 | |
3426 | fail: return; |
3427 | |
3428 | } |
3429 | |
3430 | void |
3431 | urtw_next_scan(void *arg) |
3432 | { |
3433 | struct urtw_softc *sc = arg; |
3434 | struct ieee80211com *ic = &sc->sc_ic; |
3435 | struct ifnet *ifp = &ic->ic_ific_ac.ac_if; |
3436 | |
3437 | if (usbd_is_dying(sc->sc_udev)) |
3438 | return; |
3439 | |
3440 | usbd_ref_incr(sc->sc_udev); |
3441 | |
3442 | if (ic->ic_state == IEEE80211_S_SCAN) |
3443 | ieee80211_next_scan(ifp); |
3444 | |
3445 | usbd_ref_decr(sc->sc_udev); |
3446 | } |
3447 | |
3448 | void |
3449 | urtw_task(void *arg) |
3450 | { |
3451 | struct urtw_softc *sc = arg; |
3452 | struct ieee80211com *ic = &sc->sc_ic; |
3453 | struct ieee80211_node *ni; |
3454 | enum ieee80211_state ostate; |
3455 | usbd_status error = 0; |
3456 | |
3457 | if (usbd_is_dying(sc->sc_udev)) |
3458 | return; |
3459 | |
3460 | ostate = ic->ic_state; |
3461 | |
3462 | switch (sc->sc_state) { |
3463 | case IEEE80211_S_INIT: |
3464 | if (ostate == IEEE80211_S_RUN) { |
3465 | /* turn link LED off */ |
3466 | (void)urtw_led_off(sc, URTW_LED_GPIO1); |
3467 | } |
3468 | break; |
3469 | |
3470 | case IEEE80211_S_SCAN: |
3471 | urtw_set_chan(sc, ic->ic_bss->ni_chan); |
3472 | if (!usbd_is_dying(sc->sc_udev)) |
3473 | timeout_add_msec(&sc->scan_to, 200); |
3474 | break; |
3475 | |
3476 | case IEEE80211_S_AUTH: |
3477 | case IEEE80211_S_ASSOC: |
3478 | urtw_set_chan(sc, ic->ic_bss->ni_chan); |
3479 | break; |
3480 | |
3481 | case IEEE80211_S_RUN: |
3482 | ni = ic->ic_bss; |
3483 | |
3484 | /* setting bssid. */ |
3485 | error = urtw_set_bssid(sc, ni->ni_bssid); |
3486 | if (error != 0) |
3487 | goto fail; |
3488 | urtw_update_msr(sc); |
3489 | /* XXX maybe the below would be incorrect. */ |
3490 | urtw_write16_m(sc, URTW_ATIM_WND, 2)do { error = urtw_write16_c(sc, 0x0072, 2, 0); if (error != 0 ) goto fail; } while (0); |
3491 | urtw_write16_m(sc, URTW_ATIM_TR_ITV, 100)do { error = urtw_write16_c(sc, 0x0076, 100, 0); if (error != 0) goto fail; } while (0); |
3492 | urtw_write16_m(sc, URTW_BEACON_INTERVAL, 0x64)do { error = urtw_write16_c(sc, 0x0070, 0x64, 0); if (error != 0) goto fail; } while (0); |
3493 | urtw_write16_m(sc, URTW_BEACON_INTERVAL_TIME, 0x3ff)do { error = urtw_write16_c(sc, 0x0074, 0x3ff, 0); if (error != 0) goto fail; } while (0); |
3494 | error = urtw_led_ctl(sc, URTW_LED_CTL_LINK2); |
3495 | if (error != 0) |
3496 | printf("%s: could not control LED (%d)\n", |
3497 | sc->sc_dev.dv_xname, error); |
3498 | break; |
3499 | } |
3500 | |
3501 | sc->sc_newstate(ic, sc->sc_state, sc->sc_arg); |
3502 | |
3503 | fail: |
3504 | if (error != 0) |
3505 | DPRINTF(("%s: error duing processing RUN state.", |
3506 | sc->sc_dev.dv_xname)); |
3507 | } |
3508 | |
3509 | usbd_status |
3510 | urtw_8187b_update_wmm(struct urtw_softc *sc) |
3511 | { |
3512 | struct ieee80211com *ic = &sc->sc_ic; |
3513 | struct ieee80211_channel *c = ic->ic_ibss_chan; |
3514 | uint32_t data; |
3515 | uint8_t aifs, sifs, slot, ecwmin, ecwmax; |
3516 | usbd_status error; |
3517 | |
3518 | sifs = 0xa; |
3519 | if (IEEE80211_IS_CHAN_G(c)(((c)->ic_flags & (0x0080 | 0x0400)) == (0x0080 | 0x0400 ))) |
3520 | slot = 0x9; |
3521 | else |
3522 | slot = 0x14; |
3523 | |
3524 | aifs = (2 * slot) + sifs; |
3525 | ecwmin = 3; |
3526 | ecwmax = 7; |
3527 | |
3528 | data = ((uint32_t)aifs << 0) | /* AIFS, offset 0 */ |
3529 | ((uint32_t)ecwmin << 8) | /* ECW minimum, offset 8 */ |
3530 | ((uint32_t)ecwmax << 12); /* ECW maximum, offset 16 */ |
3531 | |
3532 | urtw_write32_m(sc, URTW_AC_VO, data)do { error = urtw_write32_c(sc, 0x00f0, data, 0); if (error != 0) goto fail; } while (0); |
3533 | urtw_write32_m(sc, URTW_AC_VI, data)do { error = urtw_write32_c(sc, 0x00f4, data, 0); if (error != 0) goto fail; } while (0); |
3534 | urtw_write32_m(sc, URTW_AC_BE, data)do { error = urtw_write32_c(sc, 0x00f8, data, 0); if (error != 0) goto fail; } while (0); |
3535 | urtw_write32_m(sc, URTW_AC_BK, data)do { error = urtw_write32_c(sc, 0x00fc, data, 0); if (error != 0) goto fail; } while (0); |
3536 | |
3537 | fail: |
3538 | return (error); |
3539 | } |
3540 | |
3541 | usbd_status |
3542 | urtw_8187b_reset(struct urtw_softc *sc) |
3543 | { |
3544 | uint8_t data; |
3545 | usbd_status error; |
3546 | |
3547 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
3548 | if (error) |
3549 | goto fail; |
3550 | |
3551 | urtw_read8_m(sc, URTW_CONFIG3, &data)do { error = urtw_read8_c(sc, 0x0059, &data, 0); if (error != 0) goto fail; } while (0); |
3552 | urtw_write8_m(sc, URTW_CONFIG3, data | URTW_CONFIG3_ANAPARAM_WRITE |do { error = urtw_write8_c(sc, 0x0059, data | (0x40) | (0x80) , 0); if (error != 0) goto fail; } while (0) |
3553 | URTW_CONFIG3_GNT_SELECT)do { error = urtw_write8_c(sc, 0x0059, data | (0x40) | (0x80) , 0); if (error != 0) goto fail; } while (0); |
3554 | |
3555 | urtw_write32_m(sc, URTW_ANAPARAM2, URTW_8187B_8225_ANAPARAM2_ON)do { error = urtw_write32_c(sc, 0x0060, (0x727f3f52), 0); if ( error != 0) goto fail; } while (0); |
3556 | urtw_write32_m(sc, URTW_ANAPARAM, URTW_8187B_8225_ANAPARAM_ON)do { error = urtw_write32_c(sc, 0x0054, (0x45090658), 0); if ( error != 0) goto fail; } while (0); |
3557 | urtw_write8_m(sc, URTW_ANAPARAM3, URTW_8187B_8225_ANAPARAM3_ON)do { error = urtw_write8_c(sc, 0x00ee, (0x0), 0); if (error != 0) goto fail; } while (0); |
3558 | |
3559 | urtw_write8_m(sc, 0x61, 0x10)do { error = urtw_write8_c(sc, 0x61, 0x10, 0); if (error != 0 ) goto fail; } while (0); |
3560 | urtw_read8_m(sc, 0x62, &data)do { error = urtw_read8_c(sc, 0x62, &data, 0); if (error != 0) goto fail; } while (0); |
3561 | urtw_write8_m(sc, 0x62, data & ~(1 << 5))do { error = urtw_write8_c(sc, 0x62, data & ~(1 << 5 ), 0); if (error != 0) goto fail; } while (0); |
3562 | urtw_write8_m(sc, 0x62, data | (1 << 5))do { error = urtw_write8_c(sc, 0x62, data | (1 << 5), 0 ); if (error != 0) goto fail; } while (0); |
3563 | |
3564 | urtw_read8_m(sc, URTW_CONFIG3, &data)do { error = urtw_read8_c(sc, 0x0059, &data, 0); if (error != 0) goto fail; } while (0); |
3565 | urtw_write8_m(sc, URTW_CONFIG3, data & ~URTW_CONFIG3_ANAPARAM_WRITE)do { error = urtw_write8_c(sc, 0x0059, data & ~(0x40), 0) ; if (error != 0) goto fail; } while (0); |
3566 | |
3567 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
3568 | if (error) |
3569 | goto fail; |
3570 | |
3571 | urtw_read8_m(sc, URTW_CMD, &data)do { error = urtw_read8_c(sc, 0x0037, &data, 0); if (error != 0) goto fail; } while (0); |
3572 | data = (data & 2) | URTW_CMD_RST(0x10); |
3573 | urtw_write8_m(sc, URTW_CMD, data)do { error = urtw_write8_c(sc, 0x0037, data, 0); if (error != 0) goto fail; } while (0); |
3574 | usbd_delay_ms(sc->sc_udev, 100); |
3575 | |
3576 | urtw_read8_m(sc, URTW_CMD, &data)do { error = urtw_read8_c(sc, 0x0037, &data, 0); if (error != 0) goto fail; } while (0); |
3577 | if (data & URTW_CMD_RST(0x10)) { |
3578 | printf("%s: reset timeout\n", sc->sc_dev.dv_xname); |
3579 | goto fail; |
3580 | } |
3581 | |
3582 | fail: |
3583 | return (error); |
3584 | } |
3585 | |
3586 | int |
3587 | urtw_8187b_init(struct ifnet *ifp) |
3588 | { |
3589 | struct urtw_softc *sc = ifp->if_softc; |
3590 | struct urtw_rf *rf = &sc->sc_rf; |
3591 | struct ieee80211com *ic = &sc->sc_ic; |
3592 | uint8_t data; |
3593 | usbd_status error; |
3594 | |
3595 | urtw_stop(ifp, 0); |
3596 | |
3597 | error = urtw_8187b_update_wmm(sc); |
3598 | if (error != 0) |
3599 | goto fail; |
3600 | error = urtw_8187b_reset(sc); |
3601 | if (error) |
3602 | goto fail; |
3603 | |
3604 | /* Applying MAC address again. */ |
3605 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
3606 | if (error) |
3607 | goto fail; |
3608 | IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl))__builtin_memcpy((ic->ic_myaddr), (((caddr_t)((ifp->if_sadl )->sdl_data + (ifp->if_sadl)->sdl_nlen))), (6)); |
3609 | error = urtw_set_macaddr(sc, ic->ic_myaddr); |
3610 | if (error) |
3611 | goto fail; |
3612 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
3613 | if (error) |
3614 | goto fail; |
3615 | |
3616 | error = urtw_update_msr(sc); |
3617 | if (error) |
3618 | goto fail; |
3619 | |
3620 | error = rf->init(rf); |
3621 | if (error != 0) |
3622 | goto fail; |
3623 | |
3624 | urtw_write8_m(sc, URTW_CMD, URTW_CMD_TX_ENABLE |do { error = urtw_write8_c(sc, 0x0037, (0x4) | (0x8), 0); if ( error != 0) goto fail; } while (0) |
3625 | URTW_CMD_RX_ENABLE)do { error = urtw_write8_c(sc, 0x0037, (0x4) | (0x8), 0); if ( error != 0) goto fail; } while (0); |
3626 | error = urtw_intr_enable(sc); |
3627 | if (error != 0) |
3628 | goto fail; |
3629 | |
3630 | error = urtw_write8e(sc, 0x41, 0xf4); |
3631 | if (error != 0) |
3632 | goto fail; |
3633 | error = urtw_write8e(sc, 0x40, 0x00); |
3634 | if (error != 0) |
3635 | goto fail; |
3636 | error = urtw_write8e(sc, 0x42, 0x00); |
3637 | if (error != 0) |
3638 | goto fail; |
3639 | error = urtw_write8e(sc, 0x42, 0x01); |
3640 | if (error != 0) |
3641 | goto fail; |
3642 | error = urtw_write8e(sc, 0x40, 0x0f); |
3643 | if (error != 0) |
3644 | goto fail; |
3645 | error = urtw_write8e(sc, 0x42, 0x00); |
3646 | if (error != 0) |
3647 | goto fail; |
3648 | error = urtw_write8e(sc, 0x42, 0x01); |
3649 | if (error != 0) |
3650 | goto fail; |
3651 | |
3652 | urtw_read8_m(sc, 0xdb, &data)do { error = urtw_read8_c(sc, 0xdb, &data, 0); if (error != 0) goto fail; } while (0); |
3653 | urtw_write8_m(sc, 0xdb, data | (1 << 2))do { error = urtw_write8_c(sc, 0xdb, data | (1 << 2), 0 ); if (error != 0) goto fail; } while (0); |
3654 | urtw_write16_idx_m(sc, 0x72, 0x59fa, 3)do { error = urtw_write16_c(sc, 0x72, 0x59fa, 3); if (error != 0) goto fail; } while (0); |
3655 | urtw_write16_idx_m(sc, 0x74, 0x59d2, 3)do { error = urtw_write16_c(sc, 0x74, 0x59d2, 3); if (error != 0) goto fail; } while (0); |
3656 | urtw_write16_idx_m(sc, 0x76, 0x59d2, 3)do { error = urtw_write16_c(sc, 0x76, 0x59d2, 3); if (error != 0) goto fail; } while (0); |
3657 | urtw_write16_idx_m(sc, 0x78, 0x19fa, 3)do { error = urtw_write16_c(sc, 0x78, 0x19fa, 3); if (error != 0) goto fail; } while (0); |
3658 | urtw_write16_idx_m(sc, 0x7a, 0x19fa, 3)do { error = urtw_write16_c(sc, 0x7a, 0x19fa, 3); if (error != 0) goto fail; } while (0); |
3659 | urtw_write16_idx_m(sc, 0x7c, 0x00d0, 3)do { error = urtw_write16_c(sc, 0x7c, 0x00d0, 3); if (error != 0) goto fail; } while (0); |
3660 | urtw_write8_m(sc, 0x61, 0)do { error = urtw_write8_c(sc, 0x61, 0, 0); if (error != 0) goto fail; } while (0); |
3661 | urtw_write8_idx_m(sc, 0x80, 0x0f, 1)do { error = urtw_write8_c(sc, 0x80, 0x0f, 1); if (error != 0 ) goto fail; } while (0); |
3662 | urtw_write8_idx_m(sc, 0x83, 0x03, 1)do { error = urtw_write8_c(sc, 0x83, 0x03, 1); if (error != 0 ) goto fail; } while (0); |
3663 | urtw_write8_m(sc, 0xda, 0x10)do { error = urtw_write8_c(sc, 0xda, 0x10, 0); if (error != 0 ) goto fail; } while (0); |
3664 | urtw_write8_idx_m(sc, 0x4d, 0x08, 2)do { error = urtw_write8_c(sc, 0x4d, 0x08, 2); if (error != 0 ) goto fail; } while (0); |
3665 | |
3666 | urtw_write32_m(sc, URTW_HSSI_PARA, 0x0600321b)do { error = urtw_write32_c(sc, 0x0094, 0x0600321b, 0); if (error != 0) goto fail; } while (0); |
3667 | |
3668 | urtw_write16_idx_m(sc, 0xec, 0x0800, 1)do { error = urtw_write16_c(sc, 0xec, 0x0800, 1); if (error != 0) goto fail; } while (0); |
3669 | |
3670 | urtw_write8_m(sc, URTW_ACM_CONTROL, 0)do { error = urtw_write8_c(sc, 0x00bf, 0, 0); if (error != 0) goto fail; } while (0); |
3671 | |
3672 | /* Reset softc variables. */ |
3673 | sc->sc_txidx = sc->sc_tx_low_queued = sc->sc_tx_normal_queued = 0; |
3674 | sc->sc_txtimer = 0; |
3675 | |
3676 | if (!(sc->sc_flags & URTW_INIT_ONCE(1 << 1))) { |
3677 | error = urtw_open_pipes(sc); |
3678 | if (error != 0) |
3679 | goto fail; |
3680 | error = urtw_alloc_rx_data_list(sc); |
3681 | if (error != 0) |
3682 | goto fail; |
3683 | error = urtw_alloc_tx_data_list(sc); |
3684 | if (error != 0) |
3685 | goto fail; |
3686 | sc->sc_flags |= URTW_INIT_ONCE(1 << 1); |
3687 | } |
3688 | |
3689 | error = urtw_rx_enable(sc); |
3690 | if (error != 0) |
3691 | goto fail; |
3692 | error = urtw_tx_enable(sc); |
3693 | if (error != 0) |
3694 | goto fail; |
3695 | |
3696 | ifp->if_flags |= IFF_RUNNING0x40; |
3697 | ifq_clr_oactive(&ifp->if_snd); |
3698 | |
3699 | ifp->if_timer = 1; |
3700 | |
3701 | if (ic->ic_opmode == IEEE80211_M_MONITOR) |
3702 | ieee80211_new_state(ic, IEEE80211_S_RUN, -1)(((ic)->ic_newstate)((ic), (IEEE80211_S_RUN), (-1))); |
3703 | else |
3704 | ieee80211_new_state(ic, IEEE80211_S_SCAN, -1)(((ic)->ic_newstate)((ic), (IEEE80211_S_SCAN), (-1))); |
3705 | |
3706 | fail: |
3707 | return (error); |
3708 | } |
3709 | |
3710 | usbd_status |
3711 | urtw_8225v2_b_config_mac(struct urtw_softc *sc) |
3712 | { |
3713 | int i; |
3714 | usbd_status error; |
3715 | |
3716 | for (i = 0; i < nitems(urtw_8187b_regtbl)(sizeof((urtw_8187b_regtbl)) / sizeof((urtw_8187b_regtbl)[0]) ); i++) { |
3717 | urtw_write8_idx_m(sc, urtw_8187b_regtbl[i].reg,do { error = urtw_write8_c(sc, urtw_8187b_regtbl[i].reg, urtw_8187b_regtbl [i].val, urtw_8187b_regtbl[i].idx); if (error != 0) goto fail ; } while (0) |
3718 | urtw_8187b_regtbl[i].val, urtw_8187b_regtbl[i].idx)do { error = urtw_write8_c(sc, urtw_8187b_regtbl[i].reg, urtw_8187b_regtbl [i].val, urtw_8187b_regtbl[i].idx); if (error != 0) goto fail ; } while (0); |
3719 | } |
3720 | |
3721 | urtw_write16_m(sc, URTW_TID_AC_MAP, 0xfa50)do { error = urtw_write16_c(sc, 0x00e8, 0xfa50, 0); if (error != 0) goto fail; } while (0); |
3722 | urtw_write16_m(sc, URTW_INT_MIG, 0)do { error = urtw_write16_c(sc, 0x00e2, 0, 0); if (error != 0 ) goto fail; } while (0); |
3723 | |
3724 | urtw_write32_idx_m(sc, 0xf0, 0, 1)do { error = urtw_write32_c(sc, 0xf0, 0, 1); if (error != 0) goto fail; } while (0); |
3725 | urtw_write32_idx_m(sc, 0xf4, 0, 1)do { error = urtw_write32_c(sc, 0xf4, 0, 1); if (error != 0) goto fail; } while (0); |
3726 | urtw_write8_idx_m(sc, 0xf8, 0, 1)do { error = urtw_write8_c(sc, 0xf8, 0, 1); if (error != 0) goto fail; } while (0); |
3727 | |
3728 | urtw_write32_m(sc, URTW_RF_TIMING, 0x00004001)do { error = urtw_write32_c(sc, 0x008c, 0x00004001, 0); if (error != 0) goto fail; } while (0); |
3729 | |
3730 | fail: |
3731 | return (error); |
3732 | } |
3733 | |
3734 | usbd_status |
3735 | urtw_8225v2_b_init_rfe(struct urtw_softc *sc) |
3736 | { |
3737 | usbd_status error; |
3738 | |
3739 | urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, 0x0480)do { error = urtw_write16_c(sc, 0x0080, 0x0480, 0); if (error != 0) goto fail; } while (0); |
3740 | urtw_write16_m(sc, URTW_RF_PINS_SELECT, 0x2488)do { error = urtw_write16_c(sc, 0x0084, 0x2488, 0); if (error != 0) goto fail; } while (0); |
3741 | urtw_write16_m(sc, URTW_RF_PINS_ENABLE, 0x1fff)do { error = urtw_write16_c(sc, 0x0082, 0x1fff, 0); if (error != 0) goto fail; } while (0); |
3742 | usbd_delay_ms(sc->sc_udev, 100); |
3743 | |
3744 | fail: |
3745 | return (error); |
3746 | } |
3747 | |
3748 | usbd_status |
3749 | urtw_8225v2_b_update_chan(struct urtw_softc *sc) |
3750 | { |
3751 | struct ieee80211com *ic = &sc->sc_ic; |
3752 | struct ieee80211_channel *c = ic->ic_ibss_chan; |
3753 | uint8_t aifs, difs, eifs, sifs, slot; |
3754 | usbd_status error; |
3755 | |
3756 | urtw_write8_m(sc, URTW_SIFS, 0x22)do { error = urtw_write8_c(sc, 0x00b4, 0x22, 0); if (error != 0) goto fail; } while (0); |
3757 | |
3758 | sifs = 0xa; |
3759 | if (IEEE80211_IS_CHAN_G(c)(((c)->ic_flags & (0x0080 | 0x0400)) == (0x0080 | 0x0400 ))) { |
3760 | slot = 0x9; |
3761 | difs = 0x1c; |
3762 | eifs = 0x5b; |
3763 | } else { |
3764 | slot = 0x14; |
3765 | difs = 0x32; |
3766 | eifs = 0x5b; |
3767 | } |
3768 | aifs = (2 * slot) + sifs; |
3769 | |
3770 | urtw_write8_m(sc, URTW_SLOT, slot)do { error = urtw_write8_c(sc, 0x00b6, slot, 0); if (error != 0) goto fail; } while (0); |
3771 | |
3772 | urtw_write8_m(sc, URTW_AC_VO, aifs)do { error = urtw_write8_c(sc, 0x00f0, aifs, 0); if (error != 0) goto fail; } while (0); |
3773 | urtw_write8_m(sc, URTW_AC_VI, aifs)do { error = urtw_write8_c(sc, 0x00f4, aifs, 0); if (error != 0) goto fail; } while (0); |
3774 | urtw_write8_m(sc, URTW_AC_BE, aifs)do { error = urtw_write8_c(sc, 0x00f8, aifs, 0); if (error != 0) goto fail; } while (0); |
3775 | urtw_write8_m(sc, URTW_AC_BK, aifs)do { error = urtw_write8_c(sc, 0x00fc, aifs, 0); if (error != 0) goto fail; } while (0); |
3776 | |
3777 | urtw_write8_m(sc, URTW_DIFS, difs)do { error = urtw_write8_c(sc, 0x00b5, difs, 0); if (error != 0) goto fail; } while (0); |
3778 | urtw_write8_m(sc, URTW_8187B_EIFS, eifs)do { error = urtw_write8_c(sc, 0x002d, eifs, 0); if (error != 0) goto fail; } while (0); |
3779 | |
3780 | fail: |
3781 | return (error); |
3782 | } |
3783 | |
3784 | usbd_status |
3785 | urtw_8225v2_b_rf_init(struct urtw_rf *rf) |
3786 | { |
3787 | struct urtw_softc *sc = rf->rf_sc; |
3788 | int i; |
3789 | uint8_t data; |
3790 | usbd_status error; |
3791 | |
3792 | /* Set up ACK rate, retry limit, TX AGC, TX antenna. */ |
3793 | urtw_write16_m(sc, URTW_8187B_BRSR, 0x0fff)do { error = urtw_write16_c(sc, 0x0034, 0x0fff, 0); if (error != 0) goto fail; } while (0); |
3794 | urtw_read8_m(sc, URTW_CW_CONF, &data)do { error = urtw_read8_c(sc, 0x00bc, &data, 0); if (error != 0) goto fail; } while (0); |
3795 | urtw_write8_m(sc, URTW_CW_CONF, data |do { error = urtw_write8_c(sc, 0x00bc, data | (0x2), 0); if ( error != 0) goto fail; } while (0) |
3796 | URTW_CW_CONF_PERPACKET_RETRY)do { error = urtw_write8_c(sc, 0x00bc, data | (0x2), 0); if ( error != 0) goto fail; } while (0); |
3797 | urtw_read8_m(sc, URTW_TX_AGC_CTL, &data)do { error = urtw_read8_c(sc, 0x009c, &data, 0); if (error != 0) goto fail; } while (0); |
3798 | urtw_write8_m(sc, URTW_TX_AGC_CTL, data |do { error = urtw_write8_c(sc, 0x009c, data | (0x1) | (0x2), 0 ); if (error != 0) goto fail; } while (0) |
3799 | URTW_TX_AGC_CTL_PERPACKET_GAIN |do { error = urtw_write8_c(sc, 0x009c, data | (0x1) | (0x2), 0 ); if (error != 0) goto fail; } while (0) |
3800 | URTW_TX_AGC_CTL_PERPACKET_ANTSEL)do { error = urtw_write8_c(sc, 0x009c, data | (0x1) | (0x2), 0 ); if (error != 0) goto fail; } while (0); |
3801 | |
3802 | /* Auto rate fallback control. */ |
3803 | urtw_write16_idx_m(sc, URTW_ARFR, 0x0fff, 1)do { error = urtw_write16_c(sc, 0x01e0, 0x0fff, 1); if (error != 0) goto fail; } while (0); /* 1M ~ 54M */ |
3804 | urtw_read8_m(sc, URTW_RATE_FALLBACK, &data)do { error = urtw_read8_c(sc, 0x00be, &data, 0); if (error != 0) goto fail; } while (0); |
3805 | urtw_write8_m(sc, URTW_RATE_FALLBACK, data |do { error = urtw_write8_c(sc, 0x00be, data | (0x80), 0); if ( error != 0) goto fail; } while (0) |
3806 | URTW_RATE_FALLBACK_ENABLE)do { error = urtw_write8_c(sc, 0x00be, data | (0x80), 0); if ( error != 0) goto fail; } while (0); |
3807 | |
3808 | urtw_write16_m(sc, URTW_BEACON_INTERVAL, 100)do { error = urtw_write16_c(sc, 0x0070, 100, 0); if (error != 0) goto fail; } while (0); |
3809 | urtw_write16_m(sc, URTW_ATIM_WND, 2)do { error = urtw_write16_c(sc, 0x0072, 2, 0); if (error != 0 ) goto fail; } while (0); |
3810 | urtw_write16_idx_m(sc, URTW_FEMR, 0xffff, 1)do { error = urtw_write16_c(sc, 0x01d4, 0xffff, 1); if (error != 0) goto fail; } while (0); |
3811 | |
3812 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
3813 | if (error) |
3814 | goto fail; |
3815 | urtw_read8_m(sc, URTW_CONFIG1, &data)do { error = urtw_read8_c(sc, 0x0052, &data, 0); if (error != 0) goto fail; } while (0); |
3816 | urtw_write8_m(sc, URTW_CONFIG1, (data & 0x3f) | 0x80)do { error = urtw_write8_c(sc, 0x0052, (data & 0x3f) | 0x80 , 0); if (error != 0) goto fail; } while (0); |
3817 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
3818 | if (error) |
3819 | goto fail; |
3820 | |
3821 | urtw_write8_m(sc, URTW_WPA_CONFIG, 0)do { error = urtw_write8_c(sc, 0x00b0, 0, 0); if (error != 0) goto fail; } while (0); |
3822 | urtw_8225v2_b_config_mac(sc); |
3823 | urtw_write16_idx_m(sc, URTW_RFSW_CTRL, 0x569a, 2)do { error = urtw_write16_c(sc, 0x0272, 0x569a, 2); if (error != 0) goto fail; } while (0); |
3824 | |
3825 | error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG(0x3)); |
3826 | if (error) |
3827 | goto fail; |
3828 | urtw_read8_m(sc, URTW_CONFIG3, &data)do { error = urtw_read8_c(sc, 0x0059, &data, 0); if (error != 0) goto fail; } while (0); |
3829 | urtw_write8_m(sc, URTW_CONFIG3, data | URTW_CONFIG3_ANAPARAM_WRITE)do { error = urtw_write8_c(sc, 0x0059, data | (0x40), 0); if ( error != 0) goto fail; } while (0); |
3830 | error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL(0x0)); |
3831 | if (error) |
3832 | goto fail; |
3833 | |
3834 | urtw_8225v2_b_init_rfe(sc); |
3835 | |
3836 | for (i = 0; i < nitems(urtw_8225v2_b_rf)(sizeof((urtw_8225v2_b_rf)) / sizeof((urtw_8225v2_b_rf)[0])); i++) { |
3837 | urtw_8225_write(sc, urtw_8225v2_b_rf[i].reg,do { error = urtw_8225_write_c(sc, urtw_8225v2_b_rf[i].reg, urtw_8225v2_b_rf [i].val); if (error != 0) goto fail; } while (0) |
3838 | urtw_8225v2_b_rf[i].val)do { error = urtw_8225_write_c(sc, urtw_8225v2_b_rf[i].reg, urtw_8225v2_b_rf [i].val); if (error != 0) goto fail; } while (0); |
3839 | } |
3840 | |
3841 | for (i = 0; i < nitems(urtw_8225v2_rxgain)(sizeof((urtw_8225v2_rxgain)) / sizeof((urtw_8225v2_rxgain)[0 ])); i++) { |
3842 | urtw_8225_write(sc, 0x1, (uint8_t)(i + 1))do { error = urtw_8225_write_c(sc, 0x1, (uint8_t)(i + 1)); if (error != 0) goto fail; } while (0); |
3843 | urtw_8225_write(sc, 0x2, urtw_8225v2_rxgain[i])do { error = urtw_8225_write_c(sc, 0x2, urtw_8225v2_rxgain[i] ); if (error != 0) goto fail; } while (0); |
3844 | } |
3845 | |
3846 | urtw_8225_write(sc, 0x03, 0x080)do { error = urtw_8225_write_c(sc, 0x03, 0x080); if (error != 0) goto fail; } while (0); |
3847 | urtw_8225_write(sc, 0x05, 0x004)do { error = urtw_8225_write_c(sc, 0x05, 0x004); if (error != 0) goto fail; } while (0); |
3848 | urtw_8225_write(sc, 0x00, 0x0b7)do { error = urtw_8225_write_c(sc, 0x00, 0x0b7); if (error != 0) goto fail; } while (0); |
3849 | urtw_8225_write(sc, 0x02, 0xc4d)do { error = urtw_8225_write_c(sc, 0x02, 0xc4d); if (error != 0) goto fail; } while (0); |
3850 | urtw_8225_write(sc, 0x02, 0x44d)do { error = urtw_8225_write_c(sc, 0x02, 0x44d); if (error != 0) goto fail; } while (0); |
3851 | urtw_8225_write(sc, 0x00, 0x2bf)do { error = urtw_8225_write_c(sc, 0x00, 0x2bf); if (error != 0) goto fail; } while (0); |
3852 | |
3853 | urtw_write8_m(sc, URTW_TX_GAIN_CCK, 0x03)do { error = urtw_write8_c(sc, 0x009d, 0x03, 0); if (error != 0) goto fail; } while (0); |
3854 | urtw_write8_m(sc, URTW_TX_GAIN_OFDM, 0x07)do { error = urtw_write8_c(sc, 0x009e, 0x07, 0); if (error != 0) goto fail; } while (0); |
3855 | urtw_write8_m(sc, URTW_TX_ANTENNA, 0x03)do { error = urtw_write8_c(sc, 0x009f, 0x03, 0); if (error != 0) goto fail; } while (0); |
3856 | |
3857 | urtw_8187_write_phy_ofdm(sc, 0x80, 0x12)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x80, 0x12); if ( error != 0) goto fail; } while (0); |
3858 | for (i = 0; i < nitems(urtw_8225v2_agc)(sizeof((urtw_8225v2_agc)) / sizeof((urtw_8225v2_agc)[0])); i++) { |
3859 | urtw_8187_write_phy_ofdm(sc, 0x0f, urtw_8225v2_agc[i])do { error = urtw_8187_write_phy_ofdm_c(sc, 0x0f, urtw_8225v2_agc [i]); if (error != 0) goto fail; } while (0); |
3860 | urtw_8187_write_phy_ofdm(sc, 0x0e, (uint8_t)i + 0x80)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x0e, (uint8_t)i + 0x80); if (error != 0) goto fail; } while (0); |
3861 | urtw_8187_write_phy_ofdm(sc, 0x0e, 0)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x0e, 0); if (error != 0) goto fail; } while (0); |
3862 | } |
3863 | urtw_8187_write_phy_ofdm(sc, 0x80, 0x10)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x80, 0x10); if ( error != 0) goto fail; } while (0); |
3864 | |
3865 | for (i = 0; i < nitems(urtw_8225v2_ofdm)(sizeof((urtw_8225v2_ofdm)) / sizeof((urtw_8225v2_ofdm)[0])); i++) |
3866 | urtw_8187_write_phy_ofdm(sc, i, urtw_8225v2_ofdm[i])do { error = urtw_8187_write_phy_ofdm_c(sc, i, urtw_8225v2_ofdm [i]); if (error != 0) goto fail; } while (0); |
3867 | |
3868 | urtw_8225v2_b_update_chan(sc); |
3869 | |
3870 | urtw_8187_write_phy_ofdm(sc, 0x97, 0x46)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x97, 0x46); if ( error != 0) goto fail; } while (0); |
3871 | urtw_8187_write_phy_ofdm(sc, 0xa4, 0xb6)do { error = urtw_8187_write_phy_ofdm_c(sc, 0xa4, 0xb6); if ( error != 0) goto fail; } while (0); |
3872 | urtw_8187_write_phy_ofdm(sc, 0x85, 0xfc)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x85, 0xfc); if ( error != 0) goto fail; } while (0); |
3873 | urtw_8187_write_phy_cck(sc, 0xc1, 0x88)do { error = urtw_8187_write_phy_cck_c(sc, 0xc1, 0x88); if (error != 0) goto fail; } while (0); |
3874 | |
3875 | error = urtw_8225v2_b_rf_set_chan(rf, 1); |
3876 | fail: |
3877 | return (error); |
3878 | } |
3879 | |
3880 | usbd_status |
3881 | urtw_8225v2_b_rf_set_chan(struct urtw_rf *rf, int chan) |
3882 | { |
3883 | struct urtw_softc *sc = rf->rf_sc; |
3884 | usbd_status error; |
3885 | |
3886 | error = urtw_8225v2_b_set_txpwrlvl(sc, chan); |
3887 | if (error) |
3888 | goto fail; |
3889 | |
3890 | urtw_8225_write(sc, 0x7, urtw_8225_channel[chan])do { error = urtw_8225_write_c(sc, 0x7, urtw_8225_channel[chan ]); if (error != 0) goto fail; } while (0); |
3891 | /* |
3892 | * Delay removed from 8185 to 8187. |
3893 | * usbd_delay_ms(sc->sc_udev, 10); |
3894 | */ |
3895 | |
3896 | urtw_write16_m(sc, URTW_AC_VO, 0x5114)do { error = urtw_write16_c(sc, 0x00f0, 0x5114, 0); if (error != 0) goto fail; } while (0); |
3897 | urtw_write16_m(sc, URTW_AC_VI, 0x5114)do { error = urtw_write16_c(sc, 0x00f4, 0x5114, 0); if (error != 0) goto fail; } while (0); |
3898 | urtw_write16_m(sc, URTW_AC_BE, 0x5114)do { error = urtw_write16_c(sc, 0x00f8, 0x5114, 0); if (error != 0) goto fail; } while (0); |
3899 | urtw_write16_m(sc, URTW_AC_BK, 0x5114)do { error = urtw_write16_c(sc, 0x00fc, 0x5114, 0); if (error != 0) goto fail; } while (0); |
3900 | |
3901 | fail: |
3902 | return (error); |
3903 | } |
3904 | |
3905 | usbd_status |
3906 | urtw_8225v2_b_set_txpwrlvl(struct urtw_softc *sc, int chan) |
3907 | { |
3908 | int i; |
3909 | uint8_t *cck_pwrtable; |
3910 | uint8_t cck_pwrlvl_min, cck_pwrlvl_max, ofdm_pwrlvl_min, |
3911 | ofdm_pwrlvl_max; |
3912 | int8_t cck_pwrlvl = sc->sc_txpwr_cck[chan] & 0xff; |
3913 | int8_t ofdm_pwrlvl = sc->sc_txpwr_ofdm[chan] & 0xff; |
3914 | usbd_status error; |
3915 | |
3916 | if (sc->sc_hwrev & URTW_HWREV_8187B_B0x10) { |
3917 | cck_pwrlvl_min = 0; |
3918 | cck_pwrlvl_max = 15; |
3919 | ofdm_pwrlvl_min = 2; |
3920 | ofdm_pwrlvl_max = 17; |
3921 | } else { |
3922 | cck_pwrlvl_min = 7; |
3923 | cck_pwrlvl_max = 22; |
3924 | ofdm_pwrlvl_min = 10; |
3925 | ofdm_pwrlvl_max = 25; |
3926 | } |
3927 | |
3928 | /* CCK power setting */ |
3929 | cck_pwrlvl = (cck_pwrlvl > (cck_pwrlvl_max - cck_pwrlvl_min)) ? |
3930 | cck_pwrlvl_max : (cck_pwrlvl + cck_pwrlvl_min); |
3931 | |
3932 | cck_pwrlvl += sc->sc_txpwr_cck_base; |
3933 | cck_pwrlvl = (cck_pwrlvl > 35) ? 35 : cck_pwrlvl; |
3934 | cck_pwrlvl = (cck_pwrlvl < 0) ? 0 : cck_pwrlvl; |
3935 | |
3936 | cck_pwrtable = (chan == 14) ? urtw_8225v2_txpwr_cck_ch14 : |
3937 | urtw_8225v2_txpwr_cck; |
3938 | |
3939 | if (sc->sc_hwrev & URTW_HWREV_8187B_B0x10) { |
3940 | if (cck_pwrlvl <= 6) |
3941 | ; /* do nothing */ |
3942 | else if (cck_pwrlvl <= 11) |
3943 | cck_pwrtable += 8; |
3944 | else |
3945 | cck_pwrtable += 16; |
3946 | } else { |
3947 | if (cck_pwrlvl <= 5) |
3948 | ; /* do nothing */ |
3949 | else if (cck_pwrlvl <= 11) |
3950 | cck_pwrtable += 8; |
3951 | else if (cck_pwrlvl <= 17) |
3952 | cck_pwrtable += 16; |
3953 | else |
3954 | cck_pwrtable += 24; |
3955 | } |
3956 | |
3957 | for (i = 0; i < 8; i++) { |
3958 | urtw_8187_write_phy_cck(sc, 0x44 + i, cck_pwrtable[i])do { error = urtw_8187_write_phy_cck_c(sc, 0x44 + i, cck_pwrtable [i]); if (error != 0) goto fail; } while (0); |
3959 | } |
3960 | |
3961 | urtw_write8_m(sc, URTW_TX_GAIN_CCK,do { error = urtw_write8_c(sc, 0x009d, urtw_8225v2_tx_gain_cck_ofdm [cck_pwrlvl] << 1, 0); if (error != 0) goto fail; } while (0) |
3962 | urtw_8225v2_tx_gain_cck_ofdm[cck_pwrlvl] << 1)do { error = urtw_write8_c(sc, 0x009d, urtw_8225v2_tx_gain_cck_ofdm [cck_pwrlvl] << 1, 0); if (error != 0) goto fail; } while (0); |
3963 | /* |
3964 | * Delay removed from 8185 to 8187. |
3965 | * usbd_delay_ms(sc->sc_udev, 1); |
3966 | */ |
3967 | |
3968 | /* OFDM power setting */ |
3969 | ofdm_pwrlvl = (ofdm_pwrlvl > (ofdm_pwrlvl_max - ofdm_pwrlvl_min)) ? |
3970 | ofdm_pwrlvl_max : ofdm_pwrlvl + ofdm_pwrlvl_min; |
3971 | |
3972 | ofdm_pwrlvl += sc->sc_txpwr_ofdm_base; |
3973 | ofdm_pwrlvl = (ofdm_pwrlvl > 35) ? 35 : ofdm_pwrlvl; |
3974 | ofdm_pwrlvl = (ofdm_pwrlvl < 0) ? 0 : ofdm_pwrlvl; |
3975 | |
3976 | urtw_write8_m(sc, URTW_TX_GAIN_OFDM,do { error = urtw_write8_c(sc, 0x009e, urtw_8225v2_tx_gain_cck_ofdm [ofdm_pwrlvl] << 1, 0); if (error != 0) goto fail; } while (0) |
3977 | urtw_8225v2_tx_gain_cck_ofdm[ofdm_pwrlvl] << 1)do { error = urtw_write8_c(sc, 0x009e, urtw_8225v2_tx_gain_cck_ofdm [ofdm_pwrlvl] << 1, 0); if (error != 0) goto fail; } while (0); |
3978 | |
3979 | if (sc->sc_hwrev & URTW_HWREV_8187B_B0x10) { |
3980 | if (ofdm_pwrlvl <= 11) { |
3981 | urtw_8187_write_phy_ofdm(sc, 0x87, 0x60)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x87, 0x60); if ( error != 0) goto fail; } while (0); |
3982 | urtw_8187_write_phy_ofdm(sc, 0x89, 0x60)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x89, 0x60); if ( error != 0) goto fail; } while (0); |
3983 | } else { |
3984 | urtw_8187_write_phy_ofdm(sc, 0x87, 0x5c)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x87, 0x5c); if ( error != 0) goto fail; } while (0); |
3985 | urtw_8187_write_phy_ofdm(sc, 0x89, 0x5c)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x89, 0x5c); if ( error != 0) goto fail; } while (0); |
3986 | } |
3987 | } else { |
3988 | if (ofdm_pwrlvl <= 11) { |
3989 | urtw_8187_write_phy_ofdm(sc, 0x87, 0x5c)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x87, 0x5c); if ( error != 0) goto fail; } while (0); |
3990 | urtw_8187_write_phy_ofdm(sc, 0x89, 0x5c)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x89, 0x5c); if ( error != 0) goto fail; } while (0); |
3991 | } else if (ofdm_pwrlvl <= 17) { |
3992 | urtw_8187_write_phy_ofdm(sc, 0x87, 0x54)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x87, 0x54); if ( error != 0) goto fail; } while (0); |
3993 | urtw_8187_write_phy_ofdm(sc, 0x89, 0x54)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x89, 0x54); if ( error != 0) goto fail; } while (0); |
3994 | } else { |
3995 | urtw_8187_write_phy_ofdm(sc, 0x87, 0x50)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x87, 0x50); if ( error != 0) goto fail; } while (0); |
3996 | urtw_8187_write_phy_ofdm(sc, 0x89, 0x50)do { error = urtw_8187_write_phy_ofdm_c(sc, 0x89, 0x50); if ( error != 0) goto fail; } while (0); |
3997 | } |
3998 | } |
3999 | |
4000 | /* |
4001 | * Delay removed from 8185 to 8187. |
4002 | * usbd_delay_ms(sc->sc_udev, 1); |
4003 | */ |
4004 | fail: |
4005 | return (error); |
4006 | } |
4007 | |
4008 | int |
4009 | urtw_set_bssid(struct urtw_softc *sc, const uint8_t *bssid) |
4010 | { |
4011 | int error; |
4012 | |
4013 | urtw_write32_m(sc, URTW_BSSID,do { error = urtw_write32_c(sc, 0x002e, bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24, 0); if (error != 0) goto fail; } while (0) |
4014 | bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24)do { error = urtw_write32_c(sc, 0x002e, bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24, 0); if (error != 0) goto fail; } while (0); |
4015 | urtw_write16_m(sc, URTW_BSSID + 4,do { error = urtw_write16_c(sc, 0x002e + 4, bssid[4] | bssid[ 5] << 8, 0); if (error != 0) goto fail; } while (0) |
4016 | bssid[4] | bssid[5] << 8)do { error = urtw_write16_c(sc, 0x002e + 4, bssid[4] | bssid[ 5] << 8, 0); if (error != 0) goto fail; } while (0); |
4017 | |
4018 | return 0; |
4019 | |
4020 | fail: |
4021 | return error; |
4022 | } |
4023 | |
4024 | int |
4025 | urtw_set_macaddr(struct urtw_softc *sc, const uint8_t *addr) |
4026 | { |
4027 | int error; |
4028 | |
4029 | urtw_write32_m(sc, URTW_MAC0,do { error = urtw_write32_c(sc, 0x0000, addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24, 0); if (error != 0) goto fail; } while (0) |
4030 | addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24)do { error = urtw_write32_c(sc, 0x0000, addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24, 0); if (error != 0) goto fail; } while (0); |
4031 | urtw_write16_m(sc, URTW_MAC4,do { error = urtw_write16_c(sc, 0x0004, addr[4] | addr[5] << 8, 0); if (error != 0) goto fail; } while (0) |
4032 | addr[4] | addr[5] << 8)do { error = urtw_write16_c(sc, 0x0004, addr[4] | addr[5] << 8, 0); if (error != 0) goto fail; } while (0); |
4033 | |
4034 | return 0; |
4035 | |
4036 | fail: |
4037 | return error; |
4038 | } |