| File: | dev/ic/wdc.c |
| Warning: | line 1360, column 3 Value stored to 'valid_mode_found' is never read |
Press '?' to see keyboard shortcuts
Keyboard shortcuts:
| 1 | /* $OpenBSD: wdc.c,v 1.136 2019/12/31 10:05:32 mpi Exp $ */ |
| 2 | /* $NetBSD: wdc.c,v 1.68 1999/06/23 19:00:17 bouyer Exp $ */ |
| 3 | /* |
| 4 | * Copyright (c) 1998, 2001 Manuel Bouyer. All rights reserved. |
| 5 | * |
| 6 | * Redistribution and use in source and binary forms, with or without |
| 7 | * modification, are permitted provided that the following conditions |
| 8 | * are met: |
| 9 | * 1. Redistributions of source code must retain the above copyright |
| 10 | * notice, this list of conditions and the following disclaimer. |
| 11 | * 2. Redistributions in binary form must reproduce the above copyright |
| 12 | * notice, this list of conditions and the following disclaimer in the |
| 13 | * documentation and/or other materials provided with the distribution. |
| 14 | * |
| 15 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| 16 | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| 17 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| 18 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 19 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 20 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 21 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 22 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 23 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 24 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 25 | */ |
| 26 | |
| 27 | /*- |
| 28 | * Copyright (c) 1998 The NetBSD Foundation, Inc. |
| 29 | * All rights reserved. |
| 30 | * |
| 31 | * This code is derived from software contributed to The NetBSD Foundation |
| 32 | * by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer. |
| 33 | * |
| 34 | * Redistribution and use in source and binary forms, with or without |
| 35 | * modification, are permitted provided that the following conditions |
| 36 | * are met: |
| 37 | * 1. Redistributions of source code must retain the above copyright |
| 38 | * notice, this list of conditions and the following disclaimer. |
| 39 | * 2. Redistributions in binary form must reproduce the above copyright |
| 40 | * notice, this list of conditions and the following disclaimer in the |
| 41 | * documentation and/or other materials provided with the distribution. |
| 42 | * |
| 43 | * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS |
| 44 | * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED |
| 45 | * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| 46 | * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS |
| 47 | * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| 48 | * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| 49 | * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| 50 | * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| 51 | * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| 52 | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| 53 | * POSSIBILITY OF SUCH DAMAGE. |
| 54 | */ |
| 55 | |
| 56 | #include <sys/param.h> |
| 57 | #include <sys/systm.h> |
| 58 | #include <sys/kernel.h> |
| 59 | #include <sys/conf.h> |
| 60 | #include <sys/buf.h> |
| 61 | #include <sys/device.h> |
| 62 | #include <sys/malloc.h> |
| 63 | #include <sys/syslog.h> |
| 64 | #include <sys/disk.h> |
| 65 | #include <sys/pool.h> |
| 66 | |
| 67 | #include <machine/intr.h> |
| 68 | #include <machine/bus.h> |
| 69 | |
| 70 | #include <dev/ata/atavar.h> |
| 71 | #include <dev/ata/atareg.h> |
| 72 | #include <dev/ic/wdcreg.h> |
| 73 | #include <dev/ic/wdcvar.h> |
| 74 | #include <dev/ic/wdcevent.h> |
| 75 | |
| 76 | #include <scsi/scsi_all.h> |
| 77 | #include <scsi/scsiconf.h> |
| 78 | |
| 79 | #define WDCDELAY100 100 /* 100 microseconds */ |
| 80 | #define WDCNDELAY_RST(31000 * 1000 / 100) (WDC_RESET_WAIT31000 * 1000 / WDCDELAY100) |
| 81 | #if 0 |
| 82 | /* If you enable this, it will report any delays more than WDCDELAY * N long. */ |
| 83 | #define WDCNDELAY_DEBUG 50 |
| 84 | #endif /* 0 */ |
| 85 | |
| 86 | struct pool wdc_xfer_pool; |
| 87 | struct scsi_iopool wdc_xfer_iopool; |
| 88 | |
| 89 | void * wdc_xfer_get(void *); |
| 90 | void wdc_xfer_put(void *, void *); |
| 91 | |
| 92 | void __wdcerror(struct channel_softc *, char *); |
| 93 | int __wdcwait_reset(struct channel_softc *, int); |
| 94 | void __wdccommand_done(struct channel_softc *, struct wdc_xfer *); |
| 95 | void __wdccommand_start(struct channel_softc *, struct wdc_xfer *); |
| 96 | int __wdccommand_intr(struct channel_softc *, struct wdc_xfer *, int); |
| 97 | int wdprint(void *, const char *); |
| 98 | void wdc_kill_pending(struct channel_softc *); |
| 99 | |
| 100 | #define DEBUG_INTR0x01 0x01 |
| 101 | #define DEBUG_XFERS0x02 0x02 |
| 102 | #define DEBUG_STATUS0x04 0x04 |
| 103 | #define DEBUG_FUNCS0x08 0x08 |
| 104 | #define DEBUG_PROBE0x10 0x10 |
| 105 | #define DEBUG_STATUSX0x20 0x20 |
| 106 | #define DEBUG_SDRIVE0x40 0x40 |
| 107 | #define DEBUG_DETACH0x80 0x80 |
| 108 | |
| 109 | #ifdef WDCDEBUG |
| 110 | #ifndef WDCDEBUG_MASK |
| 111 | #define WDCDEBUG_MASK 0x00 |
| 112 | #endif |
| 113 | int wdcdebug_mask = WDCDEBUG_MASK; |
| 114 | int wdc_nxfer = 0; |
| 115 | #define WDCDEBUG_PRINT(args, level) do { \ |
| 116 | if ((wdcdebug_mask & (level)) != 0) \ |
| 117 | printf args; \ |
| 118 | } while (0) |
| 119 | #else |
| 120 | #define WDCDEBUG_PRINT(args, level) |
| 121 | #endif /* WDCDEBUG */ |
| 122 | |
| 123 | int at_poll = AT_POLL0x0010; |
| 124 | |
| 125 | int wdc_floating_bus(struct channel_softc *, int); |
| 126 | int wdc_preata_drive(struct channel_softc *, int); |
| 127 | int wdc_ata_present(struct channel_softc *, int); |
| 128 | |
| 129 | struct cfdriver wdc_cd = { |
| 130 | NULL((void *)0), "wdc", DV_DULL |
| 131 | }; |
| 132 | |
| 133 | struct channel_softc_vtbl wdc_default_vtbl = { |
| 134 | wdc_default_read_reg, |
| 135 | wdc_default_write_reg, |
| 136 | wdc_default_lba48_write_reg, |
| 137 | wdc_default_read_raw_multi_2, |
| 138 | wdc_default_write_raw_multi_2, |
| 139 | wdc_default_read_raw_multi_4, |
| 140 | wdc_default_write_raw_multi_4 |
| 141 | }; |
| 142 | |
| 143 | #ifdef WDCDEBUG |
| 144 | static char *wdc_log_buf = NULL((void *)0); |
| 145 | static unsigned int wdc_tail = 0; |
| 146 | static unsigned int wdc_head = 0; |
| 147 | static unsigned int wdc_log_cap = 16 * 1024; |
| 148 | static int chp_idx = 1; |
| 149 | |
| 150 | void |
| 151 | wdc_log(struct channel_softc *chp, enum wdcevent_type type, |
| 152 | unsigned int size, char val[]) |
| 153 | { |
| 154 | unsigned int request_size; |
| 155 | char *ptr; |
| 156 | int log_size; |
| 157 | unsigned int head = wdc_head; |
| 158 | unsigned int tail = wdc_tail; |
| 159 | |
| 160 | #ifdef DIAGNOSTIC1 |
| 161 | if (head > wdc_log_cap || tail > wdc_log_cap) { |
| 162 | printf ("wdc_log: head %x wdc_tail %x\n", head, |
| 163 | tail); |
| 164 | return; |
| 165 | } |
| 166 | |
| 167 | if (size > wdc_log_cap / 2) { |
| 168 | printf ("wdc_log: type %d size %x\n", type, size); |
| 169 | return; |
| 170 | } |
| 171 | #endif |
| 172 | |
| 173 | if (wdc_log_buf == NULL((void *)0)) { |
| 174 | wdc_log_buf = malloc(wdc_log_cap, M_DEVBUF2, M_NOWAIT0x0002); |
| 175 | if (wdc_log_buf == NULL((void *)0)) |
| 176 | return; |
| 177 | } |
| 178 | if (chp->ch_log_idx == 0) |
| 179 | chp->ch_log_idx = chp_idx++; |
| 180 | |
| 181 | request_size = size + 2; |
| 182 | |
| 183 | /* Check how many bytes are left */ |
| 184 | log_size = head - tail; |
| 185 | if (log_size < 0) log_size += wdc_log_cap; |
| 186 | |
| 187 | if (log_size + request_size >= wdc_log_cap) { |
| 188 | int nb = 0; |
| 189 | int rec_size; |
| 190 | |
| 191 | while (nb <= (request_size * 2)) { |
| 192 | if (wdc_log_buf[tail] == 0) |
| 193 | rec_size = 1; |
| 194 | else |
| 195 | rec_size = (wdc_log_buf[tail + 1] & 0x1f) + 2; |
| 196 | tail = (tail + rec_size) % wdc_log_cap; |
| 197 | nb += rec_size; |
| 198 | } |
| 199 | } |
| 200 | |
| 201 | /* Avoid wrapping in the middle of a request */ |
| 202 | if (head + request_size >= wdc_log_cap) { |
| 203 | memset(&wdc_log_buf[head], 0, wdc_log_cap - head)__builtin_memset((&wdc_log_buf[head]), (0), (wdc_log_cap - head)); |
| 204 | head = 0; |
| 205 | } |
| 206 | |
| 207 | ptr = &wdc_log_buf[head]; |
| 208 | *ptr++ = type & 0xff; |
| 209 | *ptr++ = ((chp->ch_log_idx & 0x7) << 5) | (size & 0x1f); |
| 210 | memcpy(ptr, val, size)__builtin_memcpy((ptr), (val), (size)); |
| 211 | |
| 212 | wdc_head = (head + request_size) % wdc_log_cap; |
| 213 | wdc_tail = tail; |
| 214 | } |
| 215 | |
| 216 | char *wdc_get_log(unsigned int *, unsigned int *); |
| 217 | |
| 218 | char * |
| 219 | wdc_get_log(unsigned int * size, unsigned int *left) |
| 220 | { |
| 221 | int log_size; |
| 222 | char *retbuf = NULL((void *)0); |
| 223 | int nb, tocopy; |
| 224 | int s; |
| 225 | unsigned int head = wdc_head; |
| 226 | unsigned int tail = wdc_tail; |
| 227 | |
| 228 | s = splbio()splraise(0x3); |
| 229 | |
| 230 | log_size = (head - tail); |
| 231 | if (left != NULL((void *)0)) |
| 232 | *left = 0; |
| 233 | |
| 234 | if (log_size < 0) |
| 235 | log_size += wdc_log_cap; |
| 236 | |
| 237 | tocopy = log_size; |
| 238 | if ((u_int)tocopy > *size) |
| 239 | tocopy = *size; |
| 240 | |
| 241 | if (wdc_log_buf == NULL((void *)0)) { |
| 242 | *size = 0; |
| 243 | *left = 0; |
| 244 | goto out; |
| 245 | } |
| 246 | |
| 247 | #ifdef DIAGNOSTIC1 |
| 248 | if (head > wdc_log_cap || tail > wdc_log_cap) { |
| 249 | printf ("wdc_log: head %x tail %x\n", head, |
| 250 | tail); |
| 251 | *size = 0; |
| 252 | *left = 0; |
| 253 | goto out; |
| 254 | } |
| 255 | #endif |
| 256 | |
| 257 | retbuf = malloc(tocopy, M_TEMP127, M_NOWAIT0x0002); |
| 258 | if (retbuf == NULL((void *)0)) { |
| 259 | *size = 0; |
| 260 | *left = log_size; |
| 261 | goto out; |
| 262 | } |
| 263 | |
| 264 | nb = 0; |
| 265 | for (;;) { |
| 266 | int rec_size; |
| 267 | |
| 268 | if (wdc_log_buf[tail] == 0) |
| 269 | rec_size = 1; |
| 270 | else |
| 271 | rec_size = (wdc_log_buf[tail + 1] & 0x1f) + 2; |
| 272 | |
| 273 | if ((nb + rec_size) >= tocopy) |
| 274 | break; |
| 275 | |
| 276 | memcpy(&retbuf[nb], &wdc_log_buf[tail], rec_size)__builtin_memcpy((&retbuf[nb]), (&wdc_log_buf[tail]), (rec_size)); |
| 277 | tail = (tail + rec_size) % wdc_log_cap; |
| 278 | nb += rec_size; |
| 279 | } |
| 280 | |
| 281 | wdc_tail = tail; |
| 282 | *size = nb; |
| 283 | *left = log_size - nb; |
| 284 | |
| 285 | out: |
| 286 | splx(s)spllower(s); |
| 287 | return (retbuf); |
| 288 | } |
| 289 | #endif /* WDCDEBUG */ |
| 290 | |
| 291 | u_int8_t |
| 292 | wdc_default_read_reg(struct channel_softc *chp, enum wdc_regs reg) |
| 293 | { |
| 294 | #ifdef DIAGNOSTIC1 |
| 295 | if (reg & _WDC_WRONLY32) { |
| 296 | printf ("wdc_default_read_reg: reading from a write-only register %d\n", reg); |
| 297 | } |
| 298 | #endif /* DIAGNOSTIC */ |
| 299 | |
| 300 | if (reg & _WDC_AUX8) |
| 301 | return (bus_space_read_1(chp->ctl_iot, chp->ctl_ioh,((chp->ctl_iot)->read_1((chp->ctl_ioh), (reg & 7 ))) |
| 302 | reg & _WDC_REGMASK)((chp->ctl_iot)->read_1((chp->ctl_ioh), (reg & 7 )))); |
| 303 | else |
| 304 | return (bus_space_read_1(chp->cmd_iot, chp->cmd_ioh,((chp->cmd_iot)->read_1((chp->cmd_ioh), (reg & 7 ))) |
| 305 | reg & _WDC_REGMASK)((chp->cmd_iot)->read_1((chp->cmd_ioh), (reg & 7 )))); |
| 306 | } |
| 307 | |
| 308 | void |
| 309 | wdc_default_write_reg(struct channel_softc *chp, enum wdc_regs reg, u_int8_t val) |
| 310 | { |
| 311 | #ifdef DIAGNOSTIC1 |
| 312 | if (reg & _WDC_RDONLY16) { |
| 313 | printf ("wdc_default_write_reg: writing to a read-only register %d\n", reg); |
| 314 | } |
| 315 | #endif /* DIAGNOSTIC */ |
| 316 | |
| 317 | if (reg & _WDC_AUX8) |
| 318 | bus_space_write_1(chp->ctl_iot, chp->ctl_ioh,((chp->ctl_iot)->write_1((chp->ctl_ioh), (reg & 7 ), (val))) |
| 319 | reg & _WDC_REGMASK, val)((chp->ctl_iot)->write_1((chp->ctl_ioh), (reg & 7 ), (val))); |
| 320 | else |
| 321 | bus_space_write_1(chp->cmd_iot, chp->cmd_ioh,((chp->cmd_iot)->write_1((chp->cmd_ioh), (reg & 7 ), (val))) |
| 322 | reg & _WDC_REGMASK, val)((chp->cmd_iot)->write_1((chp->cmd_ioh), (reg & 7 ), (val))); |
| 323 | } |
| 324 | |
| 325 | void |
| 326 | wdc_default_lba48_write_reg(struct channel_softc *chp, enum wdc_regs reg, |
| 327 | u_int16_t val) |
| 328 | { |
| 329 | /* All registers are two byte deep FIFOs. */ |
| 330 | CHP_WRITE_REG(chp, reg, val >> 8)((chp)->_vtbl->write_reg)(chp, reg, val >> 8); |
| 331 | CHP_WRITE_REG(chp, reg, val)((chp)->_vtbl->write_reg)(chp, reg, val); |
| 332 | } |
| 333 | |
| 334 | void |
| 335 | wdc_default_read_raw_multi_2(struct channel_softc *chp, void *data, |
| 336 | unsigned int nbytes) |
| 337 | { |
| 338 | if (data == NULL((void *)0)) { |
| 339 | unsigned int i; |
| 340 | |
| 341 | for (i = 0; i < nbytes; i += 2) { |
| 342 | bus_space_read_2(chp->cmd_iot, chp->cmd_ioh, 0)((chp->cmd_iot)->read_2((chp->cmd_ioh), (0))); |
| 343 | } |
| 344 | |
| 345 | return; |
| 346 | } |
| 347 | |
| 348 | bus_space_read_raw_multi_2(chp->cmd_iot, chp->cmd_ioh, 0,((chp->cmd_iot)->read_multi_2((chp->cmd_ioh), (0), ( u_int16_t *)(data), (nbytes) >> 1)) |
| 349 | data, nbytes)((chp->cmd_iot)->read_multi_2((chp->cmd_ioh), (0), ( u_int16_t *)(data), (nbytes) >> 1)); |
| 350 | } |
| 351 | |
| 352 | |
| 353 | void |
| 354 | wdc_default_write_raw_multi_2(struct channel_softc *chp, void *data, |
| 355 | unsigned int nbytes) |
| 356 | { |
| 357 | if (data == NULL((void *)0)) { |
| 358 | unsigned int i; |
| 359 | |
| 360 | for (i = 0; i < nbytes; i += 2) { |
| 361 | bus_space_write_2(chp->cmd_iot, chp->cmd_ioh, 0, 0)((chp->cmd_iot)->write_2((chp->cmd_ioh), (0), (0))); |
| 362 | } |
| 363 | |
| 364 | return; |
| 365 | } |
| 366 | |
| 367 | bus_space_write_raw_multi_2(chp->cmd_iot, chp->cmd_ioh, 0,((chp->cmd_iot)->write_multi_2((chp->cmd_ioh), (0), ( const u_int16_t *)(data), (nbytes) >> 1)) |
| 368 | data, nbytes)((chp->cmd_iot)->write_multi_2((chp->cmd_ioh), (0), ( const u_int16_t *)(data), (nbytes) >> 1)); |
| 369 | } |
| 370 | |
| 371 | |
| 372 | void |
| 373 | wdc_default_write_raw_multi_4(struct channel_softc *chp, void *data, |
| 374 | unsigned int nbytes) |
| 375 | { |
| 376 | if (data == NULL((void *)0)) { |
| 377 | unsigned int i; |
| 378 | |
| 379 | for (i = 0; i < nbytes; i += 4) { |
| 380 | bus_space_write_4(chp->cmd_iot, chp->cmd_ioh, 0, 0)((chp->cmd_iot)->write_4((chp->cmd_ioh), (0), (0))); |
| 381 | } |
| 382 | |
| 383 | return; |
| 384 | } |
| 385 | |
| 386 | bus_space_write_raw_multi_4(chp->cmd_iot, chp->cmd_ioh, 0,((chp->cmd_iot)->write_multi_4((chp->cmd_ioh), (0), ( const u_int32_t *)(data), (nbytes) >> 2)) |
| 387 | data, nbytes)((chp->cmd_iot)->write_multi_4((chp->cmd_ioh), (0), ( const u_int32_t *)(data), (nbytes) >> 2)); |
| 388 | } |
| 389 | |
| 390 | |
| 391 | void |
| 392 | wdc_default_read_raw_multi_4(struct channel_softc *chp, void *data, |
| 393 | unsigned int nbytes) |
| 394 | { |
| 395 | if (data == NULL((void *)0)) { |
| 396 | unsigned int i; |
| 397 | |
| 398 | for (i = 0; i < nbytes; i += 4) { |
| 399 | bus_space_read_4(chp->cmd_iot, chp->cmd_ioh, 0)((chp->cmd_iot)->read_4((chp->cmd_ioh), (0))); |
| 400 | } |
| 401 | |
| 402 | return; |
| 403 | } |
| 404 | |
| 405 | bus_space_read_raw_multi_4(chp->cmd_iot, chp->cmd_ioh, 0,((chp->cmd_iot)->read_multi_4((chp->cmd_ioh), (0), ( u_int32_t *)(data), (nbytes) >> 2)) |
| 406 | data, nbytes)((chp->cmd_iot)->read_multi_4((chp->cmd_ioh), (0), ( u_int32_t *)(data), (nbytes) >> 2)); |
| 407 | } |
| 408 | |
| 409 | int |
| 410 | wdprint(void *aux, const char *pnp) |
| 411 | { |
| 412 | struct ata_atapi_attach *aa_link = aux; |
| 413 | if (pnp) |
| 414 | printf("drive at %s", pnp); |
| 415 | printf(" channel %d drive %d", aa_link->aa_channel, |
| 416 | aa_link->aa_drv_data->drive); |
| 417 | return (UNCONF1); |
| 418 | } |
| 419 | |
| 420 | void |
| 421 | wdc_disable_intr(struct channel_softc *chp) |
| 422 | { |
| 423 | CHP_WRITE_REG(chp, wdr_ctlr, WDCTL_IDS)((chp)->_vtbl->write_reg)(chp, wdr_ctlr, 0x02); |
| 424 | } |
| 425 | |
| 426 | void |
| 427 | wdc_enable_intr(struct channel_softc *chp) |
| 428 | { |
| 429 | CHP_WRITE_REG(chp, wdr_ctlr, WDCTL_4BIT)((chp)->_vtbl->write_reg)(chp, wdr_ctlr, 0x08); |
| 430 | } |
| 431 | |
| 432 | void |
| 433 | wdc_set_drive(struct channel_softc *chp, int drive) |
| 434 | { |
| 435 | CHP_WRITE_REG(chp, wdr_sdh, (drive << 4) | WDSD_IBM)((chp)->_vtbl->write_reg)(chp, wdr_sdh, (drive << 4) | 0xa0); |
| 436 | WDC_LOG_SET_DRIVE(chp, drive); |
| 437 | } |
| 438 | |
| 439 | int |
| 440 | wdc_floating_bus(struct channel_softc *chp, int drive) |
| 441 | { |
| 442 | u_int8_t cumulative_status, status; |
| 443 | int iter; |
| 444 | |
| 445 | wdc_set_drive(chp, drive); |
| 446 | delay(10)(*delay_func)(10); |
| 447 | |
| 448 | /* Stolen from Phoenix BIOS Drive Autotyping document */ |
| 449 | cumulative_status = 0; |
| 450 | for (iter = 0; iter < 100; iter++) { |
| 451 | CHP_WRITE_REG(chp, wdr_seccnt, 0x7f)((chp)->_vtbl->write_reg)(chp, wdr_seccnt, 0x7f); |
| 452 | delay (1)(*delay_func)(1); |
| 453 | |
| 454 | status = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 455 | |
| 456 | /* The other bits are meaningless if BSY is set */ |
| 457 | if (status & WDCS_BSY0x80) |
| 458 | continue; |
| 459 | |
| 460 | cumulative_status |= status; |
| 461 | |
| 462 | #define BAD_BIT_COMBO(0x40 | 0x10 | 0x08 | 0x01) (WDCS_DRDY0x40 | WDCS_DSC0x10 | WDCS_DRQ0x08 | WDCS_ERR0x01) |
| 463 | if ((cumulative_status & BAD_BIT_COMBO(0x40 | 0x10 | 0x08 | 0x01)) == BAD_BIT_COMBO(0x40 | 0x10 | 0x08 | 0x01)) |
| 464 | return 1; |
| 465 | } |
| 466 | |
| 467 | |
| 468 | return 0; |
| 469 | } |
| 470 | |
| 471 | int |
| 472 | wdc_preata_drive(struct channel_softc *chp, int drive) |
| 473 | { |
| 474 | if (wdc_floating_bus(chp, drive)) { |
| 475 | WDCDEBUG_PRINT(("%s:%d:%d: floating bus detected\n", |
| 476 | chp->wdc->sc_dev.dv_xname, |
| 477 | chp->channel, drive), DEBUG_PROBE); |
| 478 | return 0; |
| 479 | } |
| 480 | |
| 481 | wdc_set_drive(chp, drive); |
| 482 | delay(100)(*delay_func)(100); |
| 483 | if (wdcwait(chp, WDCS_DRDY | WDCS_DRQ, WDCS_DRDY, 10000)((wdc_wait_for_status((chp), (0x40 | 0x08), (0x40), (10000)) >= 0) ? 0 : -1) != 0) { |
| 484 | WDCDEBUG_PRINT(("%s:%d:%d: not ready\n", |
| 485 | chp->wdc->sc_dev.dv_xname, |
| 486 | chp->channel, drive), DEBUG_PROBE); |
| 487 | return 0; |
| 488 | } |
| 489 | |
| 490 | CHP_WRITE_REG(chp, wdr_command, WDCC_RECAL)((chp)->_vtbl->write_reg)(chp, wdr_command, 0x10); |
| 491 | WDC_LOG_ATA_CMDSHORT(chp, WDCC_RECAL); |
| 492 | if (wdcwait(chp, WDCS_DRDY | WDCS_DRQ, WDCS_DRDY, 10000)((wdc_wait_for_status((chp), (0x40 | 0x08), (0x40), (10000)) >= 0) ? 0 : -1) != 0) { |
| 493 | WDCDEBUG_PRINT(("%s:%d:%d: WDCC_RECAL failed\n", |
| 494 | chp->wdc->sc_dev.dv_xname, |
| 495 | chp->channel, drive), DEBUG_PROBE); |
| 496 | return 0; |
| 497 | } |
| 498 | |
| 499 | return 1; |
| 500 | } |
| 501 | |
| 502 | int |
| 503 | wdc_ata_present(struct channel_softc *chp, int drive) |
| 504 | { |
| 505 | int time_to_done; |
| 506 | int retry_cnt = 0; |
| 507 | |
| 508 | wdc_set_drive(chp, drive); |
| 509 | delay(10)(*delay_func)(10); |
| 510 | |
| 511 | retry: |
| 512 | /* |
| 513 | You're actually supposed to wait up to 10 seconds |
| 514 | for DRDY. However, as a practical matter, most |
| 515 | drives assert DRDY very quickly after dropping BSY. |
| 516 | |
| 517 | The 10 seconds wait is sub-optimal because, according |
| 518 | to the ATA standard, the master should reply with 00 |
| 519 | for any reads to a non-existent slave. |
| 520 | */ |
| 521 | time_to_done = wdc_wait_for_status(chp, |
| 522 | (WDCS_DRDY0x40 | WDCS_DSC0x10 | WDCS_DRQ0x08), |
| 523 | (WDCS_DRDY0x40 | WDCS_DSC0x10), 1000); |
| 524 | if (time_to_done == -1) { |
| 525 | if (retry_cnt == 0 && chp->ch_status == 0x00) { |
| 526 | /* At least one flash card needs to be kicked */ |
| 527 | wdccommandshort(chp, drive, WDCC_CHECK_PWR0xe5); |
| 528 | retry_cnt++; |
| 529 | goto retry; |
| 530 | } |
| 531 | WDCDEBUG_PRINT(("%s:%d:%d: DRDY test timed out with status" |
| 532 | " %02x\n", |
| 533 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", |
| 534 | chp->channel, drive, chp->ch_status), |
| 535 | DEBUG_PROBE); |
| 536 | return 0; |
| 537 | } |
| 538 | |
| 539 | if ((chp->ch_status & 0xfc) != (WDCS_DRDY0x40 | WDCS_DSC0x10)) { |
| 540 | WDCDEBUG_PRINT(("%s:%d:%d: status test for 0x50 failed with" |
| 541 | " %02x\n", |
| 542 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", |
| 543 | chp->channel, drive, chp->ch_status), |
| 544 | DEBUG_PROBE); |
| 545 | |
| 546 | return 0; |
| 547 | } |
| 548 | |
| 549 | WDCDEBUG_PRINT(("%s:%d:%d: waiting for ready %d msec\n", |
| 550 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", |
| 551 | chp->channel, drive, time_to_done), DEBUG_PROBE); |
| 552 | |
| 553 | /* |
| 554 | * Test register writability |
| 555 | */ |
| 556 | CHP_WRITE_REG(chp, wdr_cyl_lo, 0xaa)((chp)->_vtbl->write_reg)(chp, wdr_cyl_lo, 0xaa); |
| 557 | CHP_WRITE_REG(chp, wdr_cyl_hi, 0x55)((chp)->_vtbl->write_reg)(chp, wdr_cyl_hi, 0x55); |
| 558 | CHP_WRITE_REG(chp, wdr_seccnt, 0xff)((chp)->_vtbl->write_reg)(chp, wdr_seccnt, 0xff); |
| 559 | DELAY(10)(*delay_func)(10); |
| 560 | |
| 561 | if (CHP_READ_REG(chp, wdr_cyl_lo)((chp)->_vtbl->read_reg)(chp, wdr_cyl_lo) != 0xaa && |
| 562 | CHP_READ_REG(chp, wdr_cyl_hi)((chp)->_vtbl->read_reg)(chp, wdr_cyl_hi) != 0x55) { |
| 563 | WDCDEBUG_PRINT(("%s:%d:%d: register writability failed\n", |
| 564 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", |
| 565 | chp->channel, drive), DEBUG_PROBE); |
| 566 | return 0; |
| 567 | } |
| 568 | |
| 569 | return 1; |
| 570 | } |
| 571 | |
| 572 | |
| 573 | /* |
| 574 | * Test to see controller with at least one attached drive is there. |
| 575 | * Returns a bit for each possible drive found (0x01 for drive 0, |
| 576 | * 0x02 for drive 1). |
| 577 | * Logic: |
| 578 | * - If a status register is at 0x7f or 0xff, assume there is no drive here |
| 579 | * (ISA has pull-up resistors). Similarly if the status register has |
| 580 | * the value we last wrote to the bus (for IDE interfaces without pullups). |
| 581 | * If no drive at all -> return. |
| 582 | * - reset the controller, wait for it to complete (may take up to 31s !). |
| 583 | * If timeout -> return. |
| 584 | * - test ATA/ATAPI signatures. If at last one drive found -> return. |
| 585 | * - try an ATA command on the master. |
| 586 | */ |
| 587 | |
| 588 | int |
| 589 | wdcprobe(struct channel_softc *chp) |
| 590 | { |
| 591 | u_int8_t st0, st1, sc, sn, cl, ch; |
| 592 | u_int8_t ret_value = 0x03; |
| 593 | u_int8_t drive; |
| 594 | #ifdef WDCDEBUG |
| 595 | int savedmask = wdcdebug_mask; |
| 596 | #endif |
| 597 | |
| 598 | if (chp->_vtbl == 0) { |
| 599 | int s = splbio()splraise(0x3); |
| 600 | chp->_vtbl = &wdc_default_vtbl; |
| 601 | splx(s)spllower(s); |
| 602 | } |
| 603 | |
| 604 | #ifdef WDCDEBUG |
| 605 | if ((chp->ch_flags & WDCF_VERBOSE_PROBE0x40) || |
| 606 | (chp->wdc && |
| 607 | (chp->wdc->sc_dev.dv_cfdata->cf_flags & WDC_OPTION_PROBE_VERBOSE0x10000))) |
| 608 | wdcdebug_mask |= DEBUG_PROBE0x10; |
| 609 | #endif /* WDCDEBUG */ |
| 610 | |
| 611 | if (chp->wdc == NULL((void *)0) || |
| 612 | (chp->wdc->cap & WDC_CAPABILITY_NO_EXTRA_RESETS0x0100) == 0) { |
| 613 | /* Sample the statuses of drive 0 and 1 into st0 and st1 */ |
| 614 | wdc_set_drive(chp, 0); |
| 615 | delay(10)(*delay_func)(10); |
| 616 | st0 = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 617 | WDC_LOG_STATUS(chp, st0); |
| 618 | wdc_set_drive(chp, 1); |
| 619 | delay(10)(*delay_func)(10); |
| 620 | st1 = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 621 | WDC_LOG_STATUS(chp, st1); |
| 622 | |
| 623 | WDCDEBUG_PRINT(("%s:%d: before reset, st0=0x%b, st1=0x%b\n", |
| 624 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", |
| 625 | chp->channel, st0, WDCS_BITS, st1, WDCS_BITS), |
| 626 | DEBUG_PROBE); |
| 627 | |
| 628 | if (st0 == 0xff || st0 == WDSD_IBM0xa0) |
| 629 | ret_value &= ~0x01; |
| 630 | if (st1 == 0xff || st1 == (WDSD_IBM0xa0 | 0x10)) |
| 631 | ret_value &= ~0x02; |
| 632 | if (ret_value == 0) |
| 633 | return 0; |
| 634 | } |
| 635 | |
| 636 | /* reset the channel */ |
| 637 | wdc_do_reset(chp); |
| 638 | |
| 639 | ret_value = __wdcwait_reset(chp, ret_value); |
| 640 | WDCDEBUG_PRINT(("%s:%d: after reset, ret_value=0x%d\n", |
| 641 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", chp->channel, |
| 642 | ret_value), DEBUG_PROBE); |
| 643 | |
| 644 | if (ret_value == 0) |
| 645 | return 0; |
| 646 | |
| 647 | if (chp->wdc && (chp->wdc->quirks & WDC_QUIRK_NOATAPI0x0004)) |
| 648 | goto noatapi; |
| 649 | |
| 650 | /* |
| 651 | * Use signatures to find potential ATAPI drives |
| 652 | */ |
| 653 | for (drive = 0; drive < 2; drive++) { |
| 654 | if ((ret_value & (0x01 << drive)) == 0) |
| 655 | continue; |
| 656 | wdc_set_drive(chp, drive); |
| 657 | delay(10)(*delay_func)(10); |
| 658 | /* Save registers contents */ |
| 659 | st0 = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 660 | sc = CHP_READ_REG(chp, wdr_seccnt)((chp)->_vtbl->read_reg)(chp, wdr_seccnt); |
| 661 | sn = CHP_READ_REG(chp, wdr_sector)((chp)->_vtbl->read_reg)(chp, wdr_sector); |
| 662 | cl = CHP_READ_REG(chp, wdr_cyl_lo)((chp)->_vtbl->read_reg)(chp, wdr_cyl_lo); |
| 663 | ch = CHP_READ_REG(chp, wdr_cyl_hi)((chp)->_vtbl->read_reg)(chp, wdr_cyl_hi); |
| 664 | WDC_LOG_REG(chp, wdr_cyl_lo, (ch << 8) | cl); |
| 665 | |
| 666 | WDCDEBUG_PRINT(("%s:%d:%d: after reset, st=0x%b, sc=0x%x" |
| 667 | " sn=0x%x cl=0x%x ch=0x%x\n", |
| 668 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", |
| 669 | chp->channel, drive, st0, WDCS_BITS, sc, sn, cl, ch), |
| 670 | DEBUG_PROBE); |
| 671 | /* |
| 672 | * This is a simplification of the test in the ATAPI |
| 673 | * spec since not all drives seem to set the other regs |
| 674 | * correctly. |
| 675 | */ |
| 676 | if (cl == 0x14 && ch == 0xeb) |
| 677 | chp->ch_drive[drive].drive_flags |= DRIVE_ATAPI0x0002; |
| 678 | } |
| 679 | |
| 680 | noatapi: |
| 681 | if (chp->wdc && (chp->wdc->quirks & WDC_QUIRK_NOATA0x0002)) |
| 682 | goto noata; |
| 683 | |
| 684 | /* |
| 685 | * Detect ATA drives by poking around the registers |
| 686 | */ |
| 687 | for (drive = 0; drive < 2; drive++) { |
| 688 | if ((ret_value & (0x01 << drive)) == 0) |
| 689 | continue; |
| 690 | if (chp->ch_drive[drive].drive_flags & DRIVE_ATAPI0x0002) |
| 691 | continue; |
| 692 | |
| 693 | wdc_disable_intr(chp); |
| 694 | /* ATA detect */ |
| 695 | if (wdc_ata_present(chp, drive)) { |
| 696 | chp->ch_drive[drive].drive_flags |= DRIVE_ATA0x0001; |
| 697 | if (chp->wdc == NULL((void *)0) || |
| 698 | (chp->wdc->cap & WDC_CAPABILITY_PREATA0x0200) != 0) |
| 699 | chp->ch_drive[drive].drive_flags |= DRIVE_OLD0x0004; |
| 700 | } else { |
| 701 | ret_value &= ~(1 << drive); |
| 702 | } |
| 703 | wdc_enable_intr(chp); |
| 704 | } |
| 705 | |
| 706 | noata: |
| 707 | |
| 708 | #ifdef WDCDEBUG |
| 709 | wdcdebug_mask = savedmask; |
| 710 | #endif |
| 711 | return (ret_value); |
| 712 | } |
| 713 | |
| 714 | struct channel_queue * |
| 715 | wdc_alloc_queue(void) |
| 716 | { |
| 717 | static int inited = 0; |
| 718 | struct channel_queue *queue; |
| 719 | |
| 720 | /* Initialize global data. */ |
| 721 | if (inited == 0) { |
| 722 | /* Initialize the wdc_xfer pool. */ |
| 723 | pool_init(&wdc_xfer_pool, sizeof(struct wdc_xfer), 0, IPL_BIO0x3, |
| 724 | 0, "wdcxfer", NULL((void *)0)); |
| 725 | scsi_iopool_init(&wdc_xfer_iopool, NULL((void *)0), |
| 726 | wdc_xfer_get, wdc_xfer_put); |
| 727 | inited = 1; |
| 728 | } |
| 729 | |
| 730 | queue = malloc(sizeof(*queue), M_DEVBUF2, M_NOWAIT0x0002); |
| 731 | if (queue != NULL((void *)0)) { |
| 732 | TAILQ_INIT(&queue->sc_xfer)do { (&queue->sc_xfer)->tqh_first = ((void *)0); (& queue->sc_xfer)->tqh_last = &(&queue->sc_xfer )->tqh_first; } while (0); |
| 733 | } |
| 734 | return (queue); |
| 735 | } |
| 736 | |
| 737 | void |
| 738 | wdc_free_queue(struct channel_queue *queue) |
| 739 | { |
| 740 | free(queue, M_DEVBUF2, sizeof(*queue)); |
| 741 | } |
| 742 | |
| 743 | void |
| 744 | wdcattach(struct channel_softc *chp) |
| 745 | { |
| 746 | int i; |
| 747 | struct ata_atapi_attach aa_link; |
| 748 | #ifdef WDCDEBUG |
| 749 | int savedmask = wdcdebug_mask; |
| 750 | #endif |
| 751 | |
| 752 | if (!cold) |
| 753 | at_poll = AT_WAIT0x0008; |
| 754 | |
| 755 | if (chp->wdc->reset == NULL((void *)0)) |
| 756 | chp->wdc->reset = wdc_do_reset; |
| 757 | |
| 758 | timeout_set(&chp->ch_timo, wdctimeout, chp); |
| 759 | |
| 760 | if (!chp->_vtbl) |
| 761 | chp->_vtbl = &wdc_default_vtbl; |
| 762 | |
| 763 | for (i = 0; i < 2; i++) { |
| 764 | chp->ch_drive[i].chnl_softc = chp; |
| 765 | chp->ch_drive[i].drive = i; |
| 766 | } |
| 767 | |
| 768 | if (chp->wdc->drv_probe != NULL((void *)0)) { |
| 769 | chp->wdc->drv_probe(chp); |
| 770 | } else { |
| 771 | if (wdcprobe(chp) == 0) |
| 772 | /* If no drives, abort attach here. */ |
| 773 | return; |
| 774 | } |
| 775 | |
| 776 | /* ATAPI drives need settling time. Give them 250ms */ |
| 777 | if ((chp->ch_drive[0].drive_flags & DRIVE_ATAPI0x0002) || |
| 778 | (chp->ch_drive[1].drive_flags & DRIVE_ATAPI0x0002)) { |
| 779 | delay(250 * 1000)(*delay_func)(250 * 1000); |
| 780 | } |
| 781 | |
| 782 | #ifdef WDCDEBUG |
| 783 | if (chp->wdc->sc_dev.dv_cfdata->cf_flags & WDC_OPTION_PROBE_VERBOSE0x10000) |
| 784 | wdcdebug_mask |= DEBUG_PROBE0x10; |
| 785 | |
| 786 | if ((chp->ch_drive[0].drive_flags & DRIVE_ATAPI0x0002) || |
| 787 | (chp->ch_drive[1].drive_flags & DRIVE_ATAPI0x0002)) { |
| 788 | wdcdebug_mask = DEBUG_PROBE0x10; |
| 789 | } |
| 790 | #endif /* WDCDEBUG */ |
| 791 | |
| 792 | for (i = 0; i < 2; i++) { |
| 793 | struct ata_drive_datas *drvp = &chp->ch_drive[i]; |
| 794 | |
| 795 | /* If controller can't do 16bit flag the drives as 32bit */ |
| 796 | if ((chp->wdc->cap & |
| 797 | (WDC_CAPABILITY_DATA160x0001 | WDC_CAPABILITY_DATA320x0002)) == |
| 798 | WDC_CAPABILITY_DATA320x0002) |
| 799 | drvp->drive_flags |= DRIVE_CAP320x0008; |
| 800 | |
| 801 | if ((drvp->drive_flags & DRIVE(0x0001|0x0002|0x0004)) == 0) |
| 802 | continue; |
| 803 | |
| 804 | if (i == 1 && ((chp->ch_drive[0].drive_flags & DRIVE(0x0001|0x0002|0x0004)) == 0)) |
| 805 | chp->ch_flags |= WDCF_ONESLAVE0x02; |
| 806 | /* |
| 807 | * Wait a bit, some devices are weird just after a reset. |
| 808 | * Then issue a IDENTIFY command, to try to detect slave ghost. |
| 809 | */ |
| 810 | delay(5000)(*delay_func)(5000); |
| 811 | if (ata_get_params(&chp->ch_drive[i], at_poll, &drvp->id) == |
| 812 | CMD_OK0) { |
| 813 | /* If IDENTIFY succeeded, this is not an OLD ctrl */ |
| 814 | drvp->drive_flags &= ~DRIVE_OLD0x0004; |
| 815 | } else { |
| 816 | bzero(&drvp->id, sizeof(struct ataparams))__builtin_bzero((&drvp->id), (sizeof(struct ataparams) )); |
| 817 | drvp->drive_flags &= |
| 818 | ~(DRIVE_ATA0x0001 | DRIVE_ATAPI0x0002); |
| 819 | WDCDEBUG_PRINT(("%s:%d:%d: IDENTIFY failed\n", |
| 820 | chp->wdc->sc_dev.dv_xname, |
| 821 | chp->channel, i), DEBUG_PROBE); |
| 822 | |
| 823 | if ((drvp->drive_flags & DRIVE_OLD0x0004) && |
| 824 | !wdc_preata_drive(chp, i)) |
| 825 | drvp->drive_flags &= ~DRIVE_OLD0x0004; |
| 826 | } |
| 827 | } |
| 828 | |
| 829 | WDCDEBUG_PRINT(("wdcattach: ch_drive_flags 0x%x 0x%x\n", |
| 830 | chp->ch_drive[0].drive_flags, chp->ch_drive[1].drive_flags), |
| 831 | DEBUG_PROBE); |
| 832 | |
| 833 | /* If no drives, abort here */ |
| 834 | if ((chp->ch_drive[0].drive_flags & DRIVE(0x0001|0x0002|0x0004)) == 0 && |
| 835 | (chp->ch_drive[1].drive_flags & DRIVE(0x0001|0x0002|0x0004)) == 0) |
| 836 | goto exit; |
| 837 | |
| 838 | for (i = 0; i < 2; i++) { |
| 839 | if ((chp->ch_drive[i].drive_flags & DRIVE(0x0001|0x0002|0x0004)) == 0) { |
| 840 | continue; |
| 841 | } |
| 842 | bzero(&aa_link, sizeof(struct ata_atapi_attach))__builtin_bzero((&aa_link), (sizeof(struct ata_atapi_attach ))); |
| 843 | if (chp->ch_drive[i].drive_flags & DRIVE_ATAPI0x0002) |
| 844 | aa_link.aa_type = T_ATAPI1; |
| 845 | else |
| 846 | aa_link.aa_type = T_ATA0; |
| 847 | aa_link.aa_channel = chp->channel; |
| 848 | aa_link.aa_openings = 1; |
| 849 | aa_link.aa_drv_data = &chp->ch_drive[i]; |
| 850 | config_found(&chp->wdc->sc_dev, (void *)&aa_link, wdprint)config_found_sm((&chp->wdc->sc_dev), ((void *)& aa_link), (wdprint), ((void *)0)); |
| 851 | } |
| 852 | |
| 853 | /* |
| 854 | * reset drive_flags for unattached devices, reset state for attached |
| 855 | * ones |
| 856 | */ |
| 857 | for (i = 0; i < 2; i++) { |
| 858 | if (chp->ch_drive[i].drive_name[0] == 0) |
| 859 | chp->ch_drive[i].drive_flags = 0; |
| 860 | } |
| 861 | |
| 862 | exit: |
| 863 | #ifdef WDCDEBUG |
| 864 | wdcdebug_mask = savedmask; |
| 865 | #endif |
| 866 | return; /* for the ``exit'' label above */ |
| 867 | } |
| 868 | |
| 869 | /* |
| 870 | * Start I/O on a controller, for the given channel. |
| 871 | * The first xfer may be not for our channel if the channel queues |
| 872 | * are shared. |
| 873 | */ |
| 874 | void |
| 875 | wdcstart(struct channel_softc *chp) |
| 876 | { |
| 877 | struct wdc_xfer *xfer; |
| 878 | |
| 879 | splassert(IPL_BIO)do { if (splassert_ctl > 0) { splassert_check(0x3, __func__ ); } } while (0); |
| 880 | |
| 881 | /* is there a xfer ? */ |
| 882 | if ((xfer = TAILQ_FIRST(&chp->ch_queue->sc_xfer)((&chp->ch_queue->sc_xfer)->tqh_first)) == NULL((void *)0)) { |
| 883 | return; |
| 884 | } |
| 885 | |
| 886 | /* adjust chp, in case we have a shared queue */ |
| 887 | chp = xfer->chp; |
| 888 | |
| 889 | if ((chp->ch_flags & WDCF_ACTIVE0x01) != 0 ) { |
| 890 | return; /* channel already active */ |
| 891 | } |
| 892 | #ifdef DIAGNOSTIC1 |
| 893 | if ((chp->ch_flags & WDCF_IRQ_WAIT0x10) != 0) |
| 894 | panic("wdcstart: channel waiting for irq"); |
| 895 | #endif /* DIAGNOSTIC */ |
| 896 | |
| 897 | WDCDEBUG_PRINT(("wdcstart: xfer %p channel %d drive %d\n", xfer, |
| 898 | chp->channel, xfer->drive), DEBUG_XFERS); |
| 899 | chp->ch_flags |= WDCF_ACTIVE0x01; |
| 900 | if (chp->ch_drive[xfer->drive].drive_flags & DRIVE_RESET0x0080) { |
| 901 | chp->ch_drive[xfer->drive].drive_flags &= ~DRIVE_RESET0x0080; |
| 902 | chp->ch_drive[xfer->drive].state = 0; |
| 903 | } |
| 904 | xfer->c_start(chp, xfer); |
| 905 | } |
| 906 | |
| 907 | int |
| 908 | wdcdetach(struct channel_softc *chp, int flags) |
| 909 | { |
| 910 | int s, rv; |
| 911 | |
| 912 | s = splbio()splraise(0x3); |
| 913 | chp->dying = 1; |
| 914 | |
| 915 | wdc_kill_pending(chp); |
| 916 | timeout_del(&chp->ch_timo); |
| 917 | |
| 918 | rv = config_detach_children((struct device *)chp->wdc, flags); |
| 919 | splx(s)spllower(s); |
| 920 | |
| 921 | return (rv); |
| 922 | } |
| 923 | |
| 924 | /* |
| 925 | * Interrupt routine for the controller. Acknowledge the interrupt, check for |
| 926 | * errors on the current operation, mark it done if necessary, and start the |
| 927 | * next request. Also check for a partially done transfer, and continue with |
| 928 | * the next chunk if so. |
| 929 | */ |
| 930 | int |
| 931 | wdcintr(void *arg) |
| 932 | { |
| 933 | struct channel_softc *chp = arg; |
| 934 | struct wdc_xfer *xfer; |
| 935 | u_int8_t st = 0; |
| 936 | int ret = 0; |
| 937 | |
| 938 | if ((chp->ch_flags & WDCF_IRQ_WAIT0x10) == 0) { |
| 939 | /* Acknowledge interrupt by reading status */ |
| 940 | if (chp->_vtbl == 0) |
| 941 | st = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh,((chp->cmd_iot)->read_1((chp->cmd_ioh), (wdr_status & 7))) |
| 942 | wdr_status & _WDC_REGMASK)((chp->cmd_iot)->read_1((chp->cmd_ioh), (wdr_status & 7))); |
| 943 | else |
| 944 | st = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 945 | if (st == 0xff) |
| 946 | return (-1); |
| 947 | |
| 948 | WDCDEBUG_PRINT(("wdcintr: inactive controller\n"), DEBUG_INTR); |
| 949 | return ret; |
| 950 | } |
| 951 | |
| 952 | WDCDEBUG_PRINT(("wdcintr\n"), DEBUG_INTR); |
| 953 | xfer = TAILQ_FIRST(&chp->ch_queue->sc_xfer)((&chp->ch_queue->sc_xfer)->tqh_first); |
| 954 | if (chp->ch_flags & WDCF_DMA_WAIT0x20) { |
| 955 | chp->wdc->dma_status = |
| 956 | (*chp->wdc->dma_finish)(chp->wdc->dma_arg, chp->channel, |
| 957 | xfer->drive, 0); |
| 958 | if (chp->wdc->dma_status == 0xff) |
| 959 | return (-1); |
| 960 | if (chp->wdc->dma_status & WDC_DMAST_NOIRQ0x01) { |
| 961 | /* IRQ not for us, not detected by DMA engine */ |
| 962 | return 0; |
| 963 | } |
| 964 | chp->ch_flags &= ~WDCF_DMA_WAIT0x20; |
| 965 | } |
| 966 | |
| 967 | chp->ch_flags &= ~WDCF_IRQ_WAIT0x10; |
| 968 | ret = xfer->c_intr(chp, xfer, 1); |
| 969 | if (ret == 0) /* irq was not for us, still waiting for irq */ |
| 970 | chp->ch_flags |= WDCF_IRQ_WAIT0x10; |
| 971 | return (ret); |
| 972 | } |
| 973 | |
| 974 | /* Put all disk in RESET state */ |
| 975 | void |
| 976 | wdc_reset_channel(struct ata_drive_datas *drvp, int nowait) |
| 977 | { |
| 978 | struct channel_softc *chp = drvp->chnl_softc; |
| 979 | int drive; |
| 980 | |
| 981 | WDCDEBUG_PRINT(("ata_reset_channel %s:%d for drive %d\n", |
| 982 | chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive), |
| 983 | DEBUG_FUNCS); |
| 984 | (void) wdcreset(chp, nowait ? NOWAIT0x02 : VERBOSE0x01); |
| 985 | for (drive = 0; drive < 2; drive++) { |
| 986 | chp->ch_drive[drive].state = 0; |
| 987 | } |
| 988 | } |
| 989 | |
| 990 | int |
| 991 | wdcreset(struct channel_softc *chp, int flags) |
| 992 | { |
| 993 | int drv_mask1, drv_mask2; |
| 994 | |
| 995 | if (!chp->_vtbl) |
| 996 | chp->_vtbl = &wdc_default_vtbl; |
| 997 | |
| 998 | chp->wdc->reset(chp); |
| 999 | |
| 1000 | if (flags & NOWAIT0x02) |
| 1001 | return 0; |
| 1002 | |
| 1003 | drv_mask1 = (chp->ch_drive[0].drive_flags & DRIVE(0x0001|0x0002|0x0004)) ? 0x01:0x00; |
| 1004 | drv_mask1 |= (chp->ch_drive[1].drive_flags & DRIVE(0x0001|0x0002|0x0004)) ? 0x02:0x00; |
| 1005 | drv_mask2 = __wdcwait_reset(chp, drv_mask1); |
| 1006 | |
| 1007 | if ((flags & VERBOSE0x01) && drv_mask2 != drv_mask1) { |
| 1008 | printf("%s channel %d: reset failed for", |
| 1009 | chp->wdc->sc_dev.dv_xname, chp->channel); |
| 1010 | if ((drv_mask1 & 0x01) != 0 && (drv_mask2 & 0x01) == 0) |
| 1011 | printf(" drive 0"); |
| 1012 | if ((drv_mask1 & 0x02) != 0 && (drv_mask2 & 0x02) == 0) |
| 1013 | printf(" drive 1"); |
| 1014 | printf("\n"); |
| 1015 | } |
| 1016 | |
| 1017 | return (drv_mask1 != drv_mask2) ? 1 : 0; |
| 1018 | } |
| 1019 | |
| 1020 | void |
| 1021 | wdc_do_reset(struct channel_softc *chp) |
| 1022 | { |
| 1023 | wdc_set_drive(chp, 0); |
| 1024 | DELAY(10)(*delay_func)(10); |
| 1025 | CHP_WRITE_REG(chp, wdr_ctlr, WDCTL_4BIT | WDCTL_RST)((chp)->_vtbl->write_reg)(chp, wdr_ctlr, 0x08 | 0x04); |
| 1026 | delay(10000)(*delay_func)(10000); |
| 1027 | CHP_WRITE_REG(chp, wdr_ctlr, WDCTL_4BIT)((chp)->_vtbl->write_reg)(chp, wdr_ctlr, 0x08); |
| 1028 | delay(10000)(*delay_func)(10000); |
| 1029 | } |
| 1030 | |
| 1031 | int |
| 1032 | __wdcwait_reset(struct channel_softc *chp, int drv_mask) |
| 1033 | { |
| 1034 | int timeout; |
| 1035 | u_int8_t st0, er0, st1, er1; |
| 1036 | |
| 1037 | /* wait for BSY to deassert */ |
| 1038 | for (timeout = 0; timeout < WDCNDELAY_RST(31000 * 1000 / 100); timeout++) { |
| 1039 | wdc_set_drive(chp, 0); |
| 1040 | delay(10)(*delay_func)(10); |
| 1041 | st0 = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 1042 | er0 = CHP_READ_REG(chp, wdr_error)((chp)->_vtbl->read_reg)(chp, wdr_error); |
| 1043 | wdc_set_drive(chp, 1); |
| 1044 | delay(10)(*delay_func)(10); |
| 1045 | st1 = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 1046 | er1 = CHP_READ_REG(chp, wdr_error)((chp)->_vtbl->read_reg)(chp, wdr_error); |
| 1047 | |
| 1048 | if ((drv_mask & 0x01) == 0) { |
| 1049 | /* no master */ |
| 1050 | if ((drv_mask & 0x02) != 0 && (st1 & WDCS_BSY0x80) == 0) { |
| 1051 | /* No master, slave is ready, it's done */ |
| 1052 | goto end; |
| 1053 | } |
| 1054 | } else if ((drv_mask & 0x02) == 0) { |
| 1055 | /* no slave */ |
| 1056 | if ((drv_mask & 0x01) != 0 && (st0 & WDCS_BSY0x80) == 0) { |
| 1057 | /* No slave, master is ready, it's done */ |
| 1058 | goto end; |
| 1059 | } |
| 1060 | } else { |
| 1061 | /* Wait for both master and slave to be ready */ |
| 1062 | if ((st0 & WDCS_BSY0x80) == 0 && (st1 & WDCS_BSY0x80) == 0) { |
| 1063 | goto end; |
| 1064 | } |
| 1065 | } |
| 1066 | delay(WDCDELAY)(*delay_func)(100); |
| 1067 | } |
| 1068 | /* Reset timed out. Maybe it's because drv_mask was not right */ |
| 1069 | if (st0 & WDCS_BSY0x80) |
| 1070 | drv_mask &= ~0x01; |
| 1071 | if (st1 & WDCS_BSY0x80) |
| 1072 | drv_mask &= ~0x02; |
| 1073 | end: |
| 1074 | WDCDEBUG_PRINT(("%s:%d: wdcwait_reset() end, st0=0x%b, er0=0x%x, " |
| 1075 | "st1=0x%b, er1=0x%x, reset time=%d msec\n", |
| 1076 | chp->wdc ? chp->wdc->sc_dev.dv_xname : "wdcprobe", chp->channel, |
| 1077 | st0, WDCS_BITS, er0, st1, WDCS_BITS, er1, |
| 1078 | timeout * WDCDELAY / 1000), DEBUG_PROBE); |
| 1079 | |
| 1080 | return drv_mask; |
| 1081 | } |
| 1082 | |
| 1083 | /* |
| 1084 | * Wait for a drive to be !BSY, and have mask in its status register. |
| 1085 | * return -1 for a timeout after "timeout" ms. |
| 1086 | */ |
| 1087 | int |
| 1088 | wdc_wait_for_status(struct channel_softc *chp, int mask, int bits, int timeout) |
| 1089 | { |
| 1090 | u_char status; |
| 1091 | int time = 0; |
| 1092 | |
| 1093 | WDCDEBUG_PRINT(("wdcwait %s:%d\n", chp->wdc ?chp->wdc->sc_dev.dv_xname |
| 1094 | :"none", chp->channel), DEBUG_STATUS); |
| 1095 | chp->ch_error = 0; |
| 1096 | |
| 1097 | timeout = timeout * 1000 / WDCDELAY100; /* delay uses microseconds */ |
| 1098 | |
| 1099 | for (;;) { |
| 1100 | chp->ch_status = status = CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 1101 | WDC_LOG_STATUS(chp, chp->ch_status); |
| 1102 | |
| 1103 | if (status == 0xff) { |
| 1104 | if ((chp->ch_flags & WDCF_ONESLAVE0x02)) { |
| 1105 | wdc_set_drive(chp, 1); |
| 1106 | chp->ch_status = status = |
| 1107 | CHP_READ_REG(chp, wdr_status)((chp)->_vtbl->read_reg)(chp, wdr_status); |
| 1108 | WDC_LOG_STATUS(chp, chp->ch_status); |
| 1109 | } |
| 1110 | } |
| 1111 | if ((status & WDCS_BSY0x80) == 0 && (status & mask) == bits) |
| 1112 | break; |
| 1113 | if (++time > timeout) { |
| 1114 | WDCDEBUG_PRINT(("wdcwait: timeout, status 0x%b " |
| 1115 | "error 0x%x\n", status, WDCS_BITS, |
| 1116 | CHP_READ_REG(chp, wdr_error)), |
| 1117 | DEBUG_STATUSX | DEBUG_STATUS); |
| 1118 | return -1; |
| 1119 | } |
| 1120 | delay(WDCDELAY)(*delay_func)(100); |
| 1121 | } |
| 1122 | if (status & WDCS_ERR0x01) { |
| 1123 | chp->ch_error = CHP_READ_REG(chp, wdr_error)((chp)->_vtbl->read_reg)(chp, wdr_error); |
| 1124 | WDC_LOG_ERROR(chp, chp->ch_error); |
| 1125 | |
| 1126 | WDCDEBUG_PRINT(("wdcwait: error %x\n", chp->ch_error), |
| 1127 | DEBUG_STATUSX | DEBUG_STATUS); |
| 1128 | } |
| 1129 | |
| 1130 | #ifdef WDCNDELAY_DEBUG |
| 1131 | /* After autoconfig, there should be no long delays. */ |
| 1132 | if (!cold && time > WDCNDELAY_DEBUG) { |
| 1133 | struct wdc_xfer *xfer = TAILQ_FIRST(&chp->ch_queue->sc_xfer)((&chp->ch_queue->sc_xfer)->tqh_first); |
| 1134 | if (xfer == NULL((void *)0)) |
| 1135 | printf("%s channel %d: warning: busy-wait took %dus\n", |
| 1136 | chp->wdc->sc_dev.dv_xname, chp->channel, |
| 1137 | WDCDELAY100 * time); |
| 1138 | else |
| 1139 | printf("%s:%d:%d: warning: busy-wait took %dus\n", |
| 1140 | chp->wdc->sc_dev.dv_xname, chp->channel, |
| 1141 | xfer->drive, |
| 1142 | WDCDELAY100 * time); |
| 1143 | } |
| 1144 | #endif /* WDCNDELAY_DEBUG */ |
| 1145 | return time; |
| 1146 | } |
| 1147 | |
| 1148 | /* |
| 1149 | * Busy-wait for DMA to complete |
| 1150 | */ |
| 1151 | int |
| 1152 | wdc_dmawait(struct channel_softc *chp, struct wdc_xfer *xfer, int timeout) |
| 1153 | { |
| 1154 | int time; |
| 1155 | for (time = 0; time < timeout * 1000 / WDCDELAY100; time++) { |
| 1156 | chp->wdc->dma_status = |
| 1157 | (*chp->wdc->dma_finish)(chp->wdc->dma_arg, |
| 1158 | chp->channel, xfer->drive, 0); |
| 1159 | if ((chp->wdc->dma_status & WDC_DMAST_NOIRQ0x01) == 0) |
| 1160 | return 0; |
| 1161 | if (chp->wdc->dma_status == 0xff) { |
| 1162 | chp->dying = 1; |
| 1163 | return -1; |
| 1164 | } |
| 1165 | delay(WDCDELAY)(*delay_func)(100); |
| 1166 | } |
| 1167 | /* timeout, force a DMA halt */ |
| 1168 | chp->wdc->dma_status = (*chp->wdc->dma_finish)(chp->wdc->dma_arg, |
| 1169 | chp->channel, xfer->drive, 1); |
| 1170 | return 1; |
| 1171 | } |
| 1172 | |
| 1173 | void |
| 1174 | wdctimeout(void *arg) |
| 1175 | { |
| 1176 | struct channel_softc *chp = (struct channel_softc *)arg; |
| 1177 | struct wdc_xfer *xfer; |
| 1178 | int s; |
| 1179 | |
| 1180 | WDCDEBUG_PRINT(("wdctimeout\n"), DEBUG_FUNCS); |
| 1181 | |
| 1182 | s = splbio()splraise(0x3); |
| 1183 | xfer = TAILQ_FIRST(&chp->ch_queue->sc_xfer)((&chp->ch_queue->sc_xfer)->tqh_first); |
| 1184 | |
| 1185 | /* Did we lose a race with the interrupt? */ |
| 1186 | if (xfer == NULL((void *)0) || |
| 1187 | !timeout_triggered(&chp->ch_timo)((&chp->ch_timo)->to_flags & 0x08)) { |
| 1188 | splx(s)spllower(s); |
| 1189 | return; |
| 1190 | } |
| 1191 | if ((chp->ch_flags & WDCF_IRQ_WAIT0x10) != 0) { |
| 1192 | __wdcerror(chp, "timeout"); |
| 1193 | printf("\ttype: %s\n", (xfer->c_flags & C_ATAPI0x0002) ? |
| 1194 | "atapi":"ata"); |
| 1195 | printf("\tc_bcount: %d\n", xfer->c_bcount); |
| 1196 | printf("\tc_skip: %d\n", xfer->c_skip); |
| 1197 | if (chp->ch_flags & WDCF_DMA_WAIT0x20) { |
| 1198 | chp->wdc->dma_status = |
| 1199 | (*chp->wdc->dma_finish)(chp->wdc->dma_arg, |
| 1200 | chp->channel, xfer->drive, 1); |
| 1201 | chp->ch_flags &= ~WDCF_DMA_WAIT0x20; |
| 1202 | } |
| 1203 | /* |
| 1204 | * Call the interrupt routine. If we just missed and interrupt, |
| 1205 | * it will do what's needed. Else, it will take the needed |
| 1206 | * action (reset the device). |
| 1207 | */ |
| 1208 | xfer->c_flags |= C_TIMEOU0x0004; |
| 1209 | chp->ch_flags &= ~WDCF_IRQ_WAIT0x10; |
| 1210 | xfer->c_intr(chp, xfer, 1); |
| 1211 | } else |
| 1212 | __wdcerror(chp, "missing untimeout"); |
| 1213 | splx(s)spllower(s); |
| 1214 | } |
| 1215 | |
| 1216 | /* |
| 1217 | * Probe drive's capabilities, for use by the controller later. |
| 1218 | * Assumes drvp points to an existing drive. |
| 1219 | * XXX this should be a controller-indep function |
| 1220 | */ |
| 1221 | void |
| 1222 | wdc_probe_caps(struct ata_drive_datas *drvp, struct ataparams *params) |
| 1223 | { |
| 1224 | struct channel_softc *chp = drvp->chnl_softc; |
| 1225 | struct wdc_softc *wdc = chp->wdc; |
| 1226 | int i, valid_mode_found; |
| 1227 | int cf_flags = drvp->cf_flags; |
| 1228 | |
| 1229 | if ((wdc->cap & (WDC_CAPABILITY_DATA160x0001 | WDC_CAPABILITY_DATA320x0002)) == |
| 1230 | (WDC_CAPABILITY_DATA160x0001 | WDC_CAPABILITY_DATA320x0002)) { |
| 1231 | struct ataparams params2; |
| 1232 | |
| 1233 | /* |
| 1234 | * Controller claims 16 and 32 bit transfers. |
| 1235 | * Re-do an IDENTIFY with 32-bit transfers, |
| 1236 | * and compare results. |
| 1237 | */ |
| 1238 | drvp->drive_flags |= DRIVE_CAP320x0008; |
| 1239 | ata_get_params(drvp, at_poll, ¶ms2); |
| 1240 | if (bcmp(params, ¶ms2, sizeof(struct ataparams)) != 0) { |
| 1241 | /* Not good. fall back to 16bits */ |
| 1242 | drvp->drive_flags &= ~DRIVE_CAP320x0008; |
| 1243 | } |
| 1244 | } |
| 1245 | #if 0 /* Some ultra-DMA drives claims to only support ATA-3. sigh */ |
| 1246 | if (params->atap_ata_major > 0x01 && |
| 1247 | params->atap_ata_major != 0xffff) { |
| 1248 | for (i = 14; i > 0; i--) { |
| 1249 | if (params->atap_ata_major & (1 << i)) { |
| 1250 | printf("%sATA version %d\n", sep, i); |
| 1251 | drvp->ata_vers = i; |
| 1252 | break; |
| 1253 | } |
| 1254 | } |
| 1255 | } else |
| 1256 | #endif /* 0 */ |
| 1257 | /* Use PIO mode 3 as a default value for ATAPI devices */ |
| 1258 | if (drvp->drive_flags & DRIVE_ATAPI0x0002) |
| 1259 | drvp->PIO_mode = 3; |
| 1260 | |
| 1261 | WDCDEBUG_PRINT(("wdc_probe_caps: wdc_cap 0x%x cf_flags 0x%x\n", |
| 1262 | wdc->cap, cf_flags), DEBUG_PROBE); |
| 1263 | |
| 1264 | valid_mode_found = 0; |
| 1265 | |
| 1266 | WDCDEBUG_PRINT(("%s: atap_oldpiotiming=%d\n", __func__, |
| 1267 | params->atap_oldpiotiming), DEBUG_PROBE); |
| 1268 | /* |
| 1269 | * ATA-4 compliant devices contain PIO mode |
| 1270 | * number in atap_oldpiotiming. |
| 1271 | */ |
| 1272 | if (params->atap_oldpiotiming <= 2) { |
| 1273 | drvp->PIO_cap = params->atap_oldpiotiming; |
| 1274 | valid_mode_found = 1; |
| 1275 | drvp->drive_flags |= DRIVE_MODE0x0040; |
| 1276 | } else if (params->atap_oldpiotiming > 180) { |
| 1277 | /* |
| 1278 | * ATA-2 compliant devices contain cycle |
| 1279 | * time in atap_oldpiotiming. |
| 1280 | * A device with a cycle time of 180ns |
| 1281 | * or less is at least PIO mode 3 and |
| 1282 | * should be reporting that in |
| 1283 | * atap_piomode_supp, so ignore it here. |
| 1284 | */ |
| 1285 | if (params->atap_oldpiotiming <= 240) { |
| 1286 | drvp->PIO_cap = 2; |
| 1287 | } else { |
| 1288 | drvp->PIO_cap = 1; |
| 1289 | } |
| 1290 | valid_mode_found = 1; |
| 1291 | drvp->drive_flags |= DRIVE_MODE0x0040; |
| 1292 | } |
| 1293 | if (valid_mode_found) |
| 1294 | drvp->PIO_mode = drvp->PIO_cap; |
| 1295 | |
| 1296 | WDCDEBUG_PRINT(("%s: atap_extensions=0x%x, atap_piomode_supp=0x%x, " |
| 1297 | "atap_dmamode_supp=0x%x, atap_udmamode_supp=0x%x\n", |
| 1298 | __func__, params->atap_extensions, params->atap_piomode_supp, |
| 1299 | params->atap_dmamode_supp, params->atap_udmamode_supp), |
| 1300 | DEBUG_PROBE); |
| 1301 | |
| 1302 | /* |
| 1303 | * It's not in the specs, but it seems that some drive |
| 1304 | * returns 0xffff in atap_extensions when this field is invalid |
| 1305 | */ |
| 1306 | if (params->atap_extensions != 0xffff && |
| 1307 | (params->atap_extensions & WDC_EXT_MODES0x0002)) { |
| 1308 | /* |
| 1309 | * XXX some drives report something wrong here (they claim to |
| 1310 | * support PIO mode 8 !). As mode is coded on 3 bits in |
| 1311 | * SET FEATURE, limit it to 7 (so limit i to 4). |
| 1312 | * If higher mode than 7 is found, abort. |
| 1313 | */ |
| 1314 | for (i = 7; i >= 0; i--) { |
| 1315 | if ((params->atap_piomode_supp & (1 << i)) == 0) |
| 1316 | continue; |
| 1317 | if (i > 4) |
| 1318 | return; |
| 1319 | |
| 1320 | valid_mode_found = 1; |
| 1321 | |
| 1322 | if ((wdc->cap & WDC_CAPABILITY_MODE0x0004) == 0) { |
| 1323 | drvp->PIO_cap = i + 3; |
| 1324 | continue; |
| 1325 | } |
| 1326 | |
| 1327 | /* |
| 1328 | * See if mode is accepted. |
| 1329 | * If the controller can't set its PIO mode, |
| 1330 | * assume the BIOS set it up correctly |
| 1331 | */ |
| 1332 | if (ata_set_mode(drvp, 0x08 | (i + 3), |
| 1333 | at_poll) != CMD_OK0) |
| 1334 | continue; |
| 1335 | |
| 1336 | /* |
| 1337 | * If controller's driver can't set its PIO mode, |
| 1338 | * set the highest one the controller supports |
| 1339 | */ |
| 1340 | if (wdc->PIO_cap >= i + 3) { |
| 1341 | drvp->PIO_mode = i + 3; |
| 1342 | drvp->PIO_cap = i + 3; |
| 1343 | break; |
| 1344 | } |
| 1345 | } |
| 1346 | if (!valid_mode_found) { |
| 1347 | /* |
| 1348 | * We didn't find a valid PIO mode. |
| 1349 | * Assume the values returned for DMA are buggy too |
| 1350 | */ |
| 1351 | return; |
| 1352 | } |
| 1353 | drvp->drive_flags |= DRIVE_MODE0x0040; |
| 1354 | |
| 1355 | /* Some controllers don't support ATAPI DMA */ |
| 1356 | if ((drvp->drive_flags & DRIVE_ATAPI0x0002) && |
| 1357 | (wdc->cap & WDC_CAPABILITY_NO_ATAPI_DMA0x1000)) |
| 1358 | return; |
| 1359 | |
| 1360 | valid_mode_found = 0; |
Value stored to 'valid_mode_found' is never read | |
| 1361 | for (i = 7; i >= 0; i--) { |
| 1362 | if ((params->atap_dmamode_supp & (1 << i)) == 0) |
| 1363 | continue; |
| 1364 | if ((wdc->cap & WDC_CAPABILITY_DMA0x0008) && |
| 1365 | (wdc->cap & WDC_CAPABILITY_MODE0x0004)) |
| 1366 | if (ata_set_mode(drvp, 0x20 | i, at_poll) |
| 1367 | != CMD_OK0) |
| 1368 | continue; |
| 1369 | |
| 1370 | valid_mode_found = 1; |
| 1371 | |
| 1372 | if (wdc->cap & WDC_CAPABILITY_DMA0x0008) { |
| 1373 | if ((wdc->cap & WDC_CAPABILITY_MODE0x0004) && |
| 1374 | wdc->DMA_cap < i) |
| 1375 | continue; |
| 1376 | drvp->DMA_mode = i; |
| 1377 | drvp->DMA_cap = i; |
| 1378 | drvp->drive_flags |= DRIVE_DMA0x0010; |
| 1379 | } |
| 1380 | break; |
| 1381 | } |
| 1382 | if (params->atap_extensions & WDC_EXT_UDMA_MODES0x0004) { |
| 1383 | for (i = 7; i >= 0; i--) { |
| 1384 | if ((params->atap_udmamode_supp & (1 << i)) |
| 1385 | == 0) |
| 1386 | continue; |
| 1387 | if ((wdc->cap & WDC_CAPABILITY_MODE0x0004) && |
| 1388 | (wdc->cap & WDC_CAPABILITY_UDMA0x0010)) |
| 1389 | if (ata_set_mode(drvp, 0x40 | i, |
| 1390 | at_poll) != CMD_OK0) |
| 1391 | continue; |
| 1392 | if (wdc->cap & WDC_CAPABILITY_UDMA0x0010) { |
| 1393 | if ((wdc->cap & WDC_CAPABILITY_MODE0x0004) && |
| 1394 | wdc->UDMA_cap < i) |
| 1395 | continue; |
| 1396 | drvp->UDMA_mode = i; |
| 1397 | drvp->UDMA_cap = i; |
| 1398 | drvp->drive_flags |= DRIVE_UDMA0x0020; |
| 1399 | } |
| 1400 | break; |
| 1401 | } |
| 1402 | } |
| 1403 | } |
| 1404 | |
| 1405 | /* Try to guess ATA version here, if it didn't get reported */ |
| 1406 | if (drvp->ata_vers == 0) { |
| 1407 | if (drvp->drive_flags & DRIVE_UDMA0x0020) |
| 1408 | drvp->ata_vers = 4; /* should be at last ATA-4 */ |
| 1409 | else if (drvp->PIO_cap > 2) |
| 1410 | drvp->ata_vers = 2; /* should be at last ATA-2 */ |
| 1411 | } |
| 1412 | if (cf_flags & ATA_CONFIG_PIO_SET0x0008) { |
| 1413 | drvp->PIO_mode = |
| 1414 | (cf_flags & ATA_CONFIG_PIO_MODES0x0007) >> ATA_CONFIG_PIO_OFF0; |
| 1415 | drvp->drive_flags |= DRIVE_MODE0x0040; |
| 1416 | } |
| 1417 | if ((wdc->cap & WDC_CAPABILITY_DMA0x0008) == 0) { |
| 1418 | /* don't care about DMA modes */ |
| 1419 | return; |
| 1420 | } |
| 1421 | if (cf_flags & ATA_CONFIG_DMA_SET0x0080) { |
| 1422 | if ((cf_flags & ATA_CONFIG_DMA_MODES0x0070) == |
| 1423 | ATA_CONFIG_DMA_DISABLE0x0070) { |
| 1424 | drvp->drive_flags &= ~DRIVE_DMA0x0010; |
| 1425 | } else { |
| 1426 | drvp->DMA_mode = (cf_flags & ATA_CONFIG_DMA_MODES0x0070) >> |
| 1427 | ATA_CONFIG_DMA_OFF4; |
| 1428 | drvp->drive_flags |= DRIVE_DMA0x0010 | DRIVE_MODE0x0040; |
| 1429 | } |
| 1430 | } |
| 1431 | if ((wdc->cap & WDC_CAPABILITY_UDMA0x0010) == 0) { |
| 1432 | /* don't care about UDMA modes */ |
| 1433 | return; |
| 1434 | } |
| 1435 | if (cf_flags & ATA_CONFIG_UDMA_SET0x0800) { |
| 1436 | if ((cf_flags & ATA_CONFIG_UDMA_MODES0x0700) == |
| 1437 | ATA_CONFIG_UDMA_DISABLE0x0700) { |
| 1438 | drvp->drive_flags &= ~DRIVE_UDMA0x0020; |
| 1439 | } else { |
| 1440 | drvp->UDMA_mode = (cf_flags & ATA_CONFIG_UDMA_MODES0x0700) >> |
| 1441 | ATA_CONFIG_UDMA_OFF8; |
| 1442 | drvp->drive_flags |= DRIVE_UDMA0x0020 | DRIVE_MODE0x0040; |
| 1443 | } |
| 1444 | } |
| 1445 | } |
| 1446 | |
| 1447 | void |
| 1448 | wdc_output_bytes(struct ata_drive_datas *drvp, void *bytes, unsigned int buflen) |
| 1449 | { |
| 1450 | struct channel_softc *chp = drvp->chnl_softc; |
| 1451 | unsigned int off = 0; |
| 1452 | unsigned int len = buflen, roundlen; |
| 1453 | |
| 1454 | if (drvp->drive_flags & DRIVE_CAP320x0008) { |
| 1455 | roundlen = len & ~3; |
| 1456 | |
| 1457 | CHP_WRITE_RAW_MULTI_4(chp,((chp)->_vtbl->write_raw_multi_4)(chp, (void *)((u_int8_t *)bytes + off), roundlen) |
| 1458 | (void *)((u_int8_t *)bytes + off), roundlen)((chp)->_vtbl->write_raw_multi_4)(chp, (void *)((u_int8_t *)bytes + off), roundlen); |
| 1459 | |
| 1460 | off += roundlen; |
| 1461 | len -= roundlen; |
| 1462 | } |
| 1463 | |
| 1464 | if (len > 0) { |
| 1465 | roundlen = (len + 1) & ~0x1; |
| 1466 | |
| 1467 | CHP_WRITE_RAW_MULTI_2(chp,((chp)->_vtbl->write_raw_multi_2)(chp, (void *)((u_int8_t *)bytes + off), roundlen) |
| 1468 | (void *)((u_int8_t *)bytes + off), roundlen)((chp)->_vtbl->write_raw_multi_2)(chp, (void *)((u_int8_t *)bytes + off), roundlen); |
| 1469 | } |
| 1470 | } |
| 1471 | |
| 1472 | void |
| 1473 | wdc_input_bytes(struct ata_drive_datas *drvp, void *bytes, unsigned int buflen) |
| 1474 | { |
| 1475 | struct channel_softc *chp = drvp->chnl_softc; |
| 1476 | unsigned int off = 0; |
| 1477 | unsigned int len = buflen, roundlen; |
| 1478 | |
| 1479 | if (drvp->drive_flags & DRIVE_CAP320x0008) { |
| 1480 | roundlen = len & ~3; |
| 1481 | |
| 1482 | CHP_READ_RAW_MULTI_4(chp,((chp)->_vtbl->read_raw_multi_4)(chp, (void *)((u_int8_t *)bytes + off), roundlen) |
| 1483 | (void *)((u_int8_t *)bytes + off), roundlen)((chp)->_vtbl->read_raw_multi_4)(chp, (void *)((u_int8_t *)bytes + off), roundlen); |
| 1484 | |
| 1485 | off += roundlen; |
| 1486 | len -= roundlen; |
| 1487 | } |
| 1488 | |
| 1489 | if (len > 0) { |
| 1490 | roundlen = (len + 1) & ~0x1; |
| 1491 | |
| 1492 | CHP_READ_RAW_MULTI_2(chp,((chp)->_vtbl->read_raw_multi_2)(chp, (void *)((u_int8_t *)bytes + off), roundlen) |
| 1493 | (void *)((u_int8_t *)bytes + off), roundlen)((chp)->_vtbl->read_raw_multi_2)(chp, (void *)((u_int8_t *)bytes + off), roundlen); |
| 1494 | } |
| 1495 | } |
| 1496 | |
| 1497 | void |
| 1498 | wdc_print_caps(struct ata_drive_datas *drvp) |
| 1499 | { |
| 1500 | /* This is actually a lie until we fix the _probe_caps |
| 1501 | algorithm. Don't print out lies */ |
| 1502 | #if 0 |
| 1503 | printf("%s: can use ", drvp->drive_name); |
| 1504 | |
| 1505 | if (drvp->drive_flags & DRIVE_CAP320x0008) { |
| 1506 | printf("32-bit"); |
| 1507 | } else |
| 1508 | printf("16-bit"); |
| 1509 | |
| 1510 | printf(", PIO mode %d", drvp->PIO_cap); |
| 1511 | |
| 1512 | if (drvp->drive_flags & DRIVE_DMA0x0010) { |
| 1513 | printf(", DMA mode %d", drvp->DMA_cap); |
| 1514 | } |
| 1515 | |
| 1516 | if (drvp->drive_flags & DRIVE_UDMA0x0020) { |
| 1517 | printf(", Ultra-DMA mode %d", drvp->UDMA_cap); |
| 1518 | } |
| 1519 | |
| 1520 | printf("\n"); |
| 1521 | #endif /* 0 */ |
| 1522 | } |
| 1523 | |
| 1524 | void |
| 1525 | wdc_print_current_modes(struct channel_softc *chp) |
| 1526 | { |
| 1527 | int drive; |
| 1528 | struct ata_drive_datas *drvp; |
| 1529 | |
| 1530 | for (drive = 0; drive < 2; drive++) { |
| 1531 | drvp = &chp->ch_drive[drive]; |
| 1532 | if ((drvp->drive_flags & DRIVE(0x0001|0x0002|0x0004)) == 0) |
| 1533 | continue; |
| 1534 | |
| 1535 | printf("%s(%s:%d:%d):", |
| 1536 | drvp->drive_name, |
| 1537 | chp->wdc->sc_dev.dv_xname, chp->channel, drive); |
| 1538 | |
| 1539 | if ((chp->wdc->cap & WDC_CAPABILITY_MODE0x0004) == 0 && |
| 1540 | !(drvp->cf_flags & ATA_CONFIG_PIO_SET0x0008)) |
| 1541 | printf(" using BIOS timings"); |
| 1542 | else |
| 1543 | printf(" using PIO mode %d", drvp->PIO_mode); |
| 1544 | if (drvp->drive_flags & DRIVE_DMA0x0010) |
| 1545 | printf(", DMA mode %d", drvp->DMA_mode); |
| 1546 | if (drvp->drive_flags & DRIVE_UDMA0x0020) |
| 1547 | printf(", Ultra-DMA mode %d", drvp->UDMA_mode); |
| 1548 | printf("\n"); |
| 1549 | } |
| 1550 | } |
| 1551 | |
| 1552 | /* |
| 1553 | * downgrade the transfer mode of a drive after an error. return 1 if |
| 1554 | * downgrade was possible, 0 otherwise. |
| 1555 | */ |
| 1556 | int |
| 1557 | wdc_downgrade_mode(struct ata_drive_datas *drvp) |
| 1558 | { |
| 1559 | struct channel_softc *chp = drvp->chnl_softc; |
| 1560 | struct wdc_softc *wdc = chp->wdc; |
| 1561 | int cf_flags = drvp->cf_flags; |
| 1562 | |
| 1563 | /* if drive or controller don't know its mode, we can't do much */ |
| 1564 | if ((drvp->drive_flags & DRIVE_MODE0x0040) == 0 || |
| 1565 | (wdc->cap & WDC_CAPABILITY_MODE0x0004) == 0) |
| 1566 | return 0; |
| 1567 | /* current drive mode was set by a config flag, let it this way */ |
| 1568 | if ((cf_flags & ATA_CONFIG_PIO_SET0x0008) || |
| 1569 | (cf_flags & ATA_CONFIG_DMA_SET0x0080) || |
| 1570 | (cf_flags & ATA_CONFIG_UDMA_SET0x0800)) |
| 1571 | return 0; |
| 1572 | |
| 1573 | /* |
| 1574 | * We'd ideally like to use an Ultra DMA mode since they have the |
| 1575 | * protection of a CRC. So we try each Ultra DMA mode and see if |
| 1576 | * we can find any working combo |
| 1577 | */ |
| 1578 | if ((drvp->drive_flags & DRIVE_UDMA0x0020) && drvp->UDMA_mode > 0) { |
| 1579 | drvp->UDMA_mode = drvp->UDMA_mode - 1; |
| 1580 | printf("%s: transfer error, downgrading to Ultra-DMA mode %d\n", |
| 1581 | drvp->drive_name, drvp->UDMA_mode); |
| 1582 | } else if ((drvp->drive_flags & DRIVE_UDMA0x0020) && |
| 1583 | (drvp->drive_flags & DRIVE_DMAERR0x0100) == 0) { |
| 1584 | /* |
| 1585 | * If we were using ultra-DMA, don't downgrade to |
| 1586 | * multiword DMA if we noticed a CRC error. It has |
| 1587 | * been noticed that CRC errors in ultra-DMA lead to |
| 1588 | * silent data corruption in multiword DMA. Data |
| 1589 | * corruption is less likely to occur in PIO mode. |
| 1590 | */ |
| 1591 | drvp->drive_flags &= ~DRIVE_UDMA0x0020; |
| 1592 | drvp->drive_flags |= DRIVE_DMA0x0010; |
| 1593 | drvp->DMA_mode = drvp->DMA_cap; |
| 1594 | printf("%s: transfer error, downgrading to DMA mode %d\n", |
| 1595 | drvp->drive_name, drvp->DMA_mode); |
| 1596 | } else if (drvp->drive_flags & (DRIVE_DMA0x0010 | DRIVE_UDMA0x0020)) { |
| 1597 | drvp->drive_flags &= ~(DRIVE_DMA0x0010 | DRIVE_UDMA0x0020); |
| 1598 | drvp->PIO_mode = drvp->PIO_cap; |
| 1599 | printf("%s: transfer error, downgrading to PIO mode %d\n", |
| 1600 | drvp->drive_name, drvp->PIO_mode); |
| 1601 | } else /* already using PIO, can't downgrade */ |
| 1602 | return 0; |
| 1603 | |
| 1604 | wdc->set_modes(chp); |
| 1605 | /* reset the channel, which will schedule all drives for setup */ |
| 1606 | wdc_reset_channel(drvp, 0); |
| 1607 | return 1; |
| 1608 | } |
| 1609 | |
| 1610 | int |
| 1611 | wdc_exec_command(struct ata_drive_datas *drvp, struct wdc_command *wdc_c) |
| 1612 | { |
| 1613 | struct channel_softc *chp = drvp->chnl_softc; |
| 1614 | struct wdc_xfer *xfer; |
| 1615 | int s, ret; |
| 1616 | |
| 1617 | WDCDEBUG_PRINT(("wdc_exec_command %s:%d:%d\n", |
| 1618 | chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive), |
| 1619 | DEBUG_FUNCS); |
| 1620 | |
| 1621 | /* set up an xfer and queue. Wait for completion */ |
| 1622 | xfer = wdc_get_xfer(wdc_c->flags & AT_WAIT0x0008 ? WDC_CANSLEEP0x00 : |
| 1623 | WDC_NOSLEEP0x01); |
| 1624 | if (xfer == NULL((void *)0)) { |
| 1625 | return WDC_TRY_AGAIN0x03; |
| 1626 | } |
| 1627 | |
| 1628 | if (wdc_c->flags & AT_POLL0x0010) |
| 1629 | xfer->c_flags |= C_POLL0x0020; |
| 1630 | xfer->drive = drvp->drive; |
| 1631 | xfer->databuf = wdc_c->data; |
| 1632 | xfer->c_bcount = wdc_c->bcount; |
| 1633 | xfer->cmd = wdc_c; |
| 1634 | xfer->c_start = __wdccommand_start; |
| 1635 | xfer->c_intr = __wdccommand_intr; |
| 1636 | xfer->c_kill_xfer = __wdccommand_done; |
| 1637 | |
| 1638 | s = splbio()splraise(0x3); |
| 1639 | wdc_exec_xfer(chp, xfer); |
| 1640 | #ifdef DIAGNOSTIC1 |
| 1641 | if ((wdc_c->flags & AT_POLL0x0010) != 0 && |
| 1642 | (wdc_c->flags & AT_DONE0x0020) == 0) |
| 1643 | panic("wdc_exec_command: polled command not done"); |
| 1644 | #endif /* DIAGNOSTIC */ |
| 1645 | if (wdc_c->flags & AT_DONE0x0020) { |
| 1646 | ret = WDC_COMPLETE0x01; |
| 1647 | } else { |
| 1648 | if (wdc_c->flags & AT_WAIT0x0008) { |
| 1649 | WDCDEBUG_PRINT(("wdc_exec_command sleeping\n"), |
| 1650 | DEBUG_FUNCS); |
| 1651 | |
| 1652 | while ((wdc_c->flags & AT_DONE0x0020) == 0) { |
| 1653 | tsleep_nsec(wdc_c, PRIBIO16, "wdccmd", INFSLP0xffffffffffffffffULL); |
| 1654 | } |
| 1655 | ret = WDC_COMPLETE0x01; |
| 1656 | } else { |
| 1657 | ret = WDC_QUEUED0x02; |
| 1658 | } |
| 1659 | } |
| 1660 | splx(s)spllower(s); |
| 1661 | return ret; |
| 1662 | } |
| 1663 | |
| 1664 | void |
| 1665 | __wdccommand_start(struct channel_softc *chp, struct wdc_xfer *xfer) |
| 1666 | { |
| 1667 | int drive = xfer->drive; |
| 1668 | struct wdc_command *wdc_c = xfer->cmd; |
| 1669 | |
| 1670 | WDCDEBUG_PRINT(("__wdccommand_start %s:%d:%d\n", |
| 1671 | chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive), |
| 1672 | DEBUG_FUNCS); |
| 1673 | |
| 1674 | /* |
| 1675 | * Disable interrupts if we're polling |
| 1676 | */ |
| 1677 | if (xfer->c_flags & C_POLL0x0020) { |
| 1678 | wdc_disable_intr(chp); |
| 1679 | } |
| 1680 | |
| 1681 | wdc_set_drive(chp, drive); |
| 1682 | DELAY(1)(*delay_func)(1); |
| 1683 | |
| 1684 | /* |
| 1685 | * For resets, we don't really care to make sure that |
| 1686 | * the bus is free |
| 1687 | */ |
| 1688 | if (wdc_c->r_command != ATAPI_SOFT_RESET0x08) { |
| 1689 | if (wdcwait(chp, wdc_c->r_st_bmask | WDCS_DRQ,((wdc_wait_for_status((chp), (wdc_c->r_st_bmask | 0x08), ( wdc_c->r_st_bmask), (wdc_c->timeout)) >= 0) ? 0 : -1 ) |
| 1690 | wdc_c->r_st_bmask, wdc_c->timeout)((wdc_wait_for_status((chp), (wdc_c->r_st_bmask | 0x08), ( wdc_c->r_st_bmask), (wdc_c->timeout)) >= 0) ? 0 : -1 ) != 0) { |
| 1691 | goto timeout; |
| 1692 | } |
| 1693 | } else |
| 1694 | DELAY(10)(*delay_func)(10); |
| 1695 | |
| 1696 | wdccommand(chp, drive, wdc_c->r_command, wdc_c->r_cyl, wdc_c->r_head, |
| 1697 | wdc_c->r_sector, wdc_c->r_count, wdc_c->r_features); |
| 1698 | |
| 1699 | if ((wdc_c->flags & AT_WRITE0x0002) == AT_WRITE0x0002) { |
| 1700 | /* wait at least 400ns before reading status register */ |
| 1701 | DELAY(10)(*delay_func)(10); |
| 1702 | if (wait_for_unbusy(chp, wdc_c->timeout)((wdc_wait_for_status(((chp)), (0), (0), ((wdc_c->timeout) )) >= 0) ? 0 : -1) != 0) |
| 1703 | goto timeout; |
| 1704 | |
| 1705 | if ((chp->ch_status & (WDCS_DRQ0x08 | WDCS_ERR0x01)) == WDCS_ERR0x01) { |
| 1706 | __wdccommand_done(chp, xfer); |
| 1707 | return; |
| 1708 | } |
| 1709 | |
| 1710 | if (wait_for_drq(chp, wdc_c->timeout)((wdc_wait_for_status(((chp)), (0x08), (0x08), ((wdc_c->timeout ))) >= 0) ? 0 : -1) != 0) |
| 1711 | goto timeout; |
| 1712 | |
| 1713 | wdc_output_bytes(&chp->ch_drive[drive], |
| 1714 | wdc_c->data, wdc_c->bcount); |
| 1715 | } |
| 1716 | |
| 1717 | if ((wdc_c->flags & AT_POLL0x0010) == 0) { |
| 1718 | chp->ch_flags |= WDCF_IRQ_WAIT0x10; /* wait for interrupt */ |
| 1719 | timeout_add_msec(&chp->ch_timo, wdc_c->timeout); |
| 1720 | return; |
| 1721 | } |
| 1722 | |
| 1723 | /* |
| 1724 | * Polled command. Wait for drive ready or drq. Done in intr(). |
| 1725 | * Wait for at last 400ns for status bit to be valid. |
| 1726 | */ |
| 1727 | delay(10)(*delay_func)(10); |
| 1728 | __wdccommand_intr(chp, xfer, 0); |
| 1729 | return; |
| 1730 | |
| 1731 | timeout: |
| 1732 | wdc_c->flags |= AT_TIMEOU0x0080; |
| 1733 | __wdccommand_done(chp, xfer); |
| 1734 | } |
| 1735 | |
| 1736 | int |
| 1737 | __wdccommand_intr(struct channel_softc *chp, struct wdc_xfer *xfer, int irq) |
| 1738 | { |
| 1739 | struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive]; |
| 1740 | struct wdc_command *wdc_c = xfer->cmd; |
| 1741 | int bcount = wdc_c->bcount; |
| 1742 | char *data = wdc_c->data; |
| 1743 | |
| 1744 | WDCDEBUG_PRINT(("__wdccommand_intr %s:%d:%d\n", |
| 1745 | chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive), DEBUG_INTR); |
| 1746 | if (wdcwait(chp, wdc_c->r_st_pmask, wdc_c->r_st_pmask,((wdc_wait_for_status((chp), (wdc_c->r_st_pmask), (wdc_c-> r_st_pmask), ((irq == 0) ? wdc_c->timeout : 0)) >= 0) ? 0 : -1) |
| 1747 | (irq == 0) ? wdc_c->timeout : 0)((wdc_wait_for_status((chp), (wdc_c->r_st_pmask), (wdc_c-> r_st_pmask), ((irq == 0) ? wdc_c->timeout : 0)) >= 0) ? 0 : -1)) { |
| 1748 | if (chp->dying) { |
| 1749 | __wdccommand_done(chp, xfer); |
| 1750 | return -1; |
| 1751 | } |
| 1752 | if (irq && (xfer->c_flags & C_TIMEOU0x0004) == 0) |
| 1753 | return 0; /* IRQ was not for us */ |
| 1754 | wdc_c->flags |= AT_TIMEOU0x0080; |
| 1755 | goto out; |
| 1756 | } |
| 1757 | if (chp->wdc->cap & WDC_CAPABILITY_IRQACK0x0400) |
| 1758 | chp->wdc->irqack(chp); |
| 1759 | if (wdc_c->flags & AT_READ0x0001) { |
| 1760 | if ((chp->ch_status & WDCS_DRQ0x08) == 0) { |
| 1761 | wdc_c->flags |= AT_TIMEOU0x0080; |
| 1762 | goto out; |
| 1763 | } |
| 1764 | wdc_input_bytes(drvp, data, bcount); |
| 1765 | /* Should we wait for device to indicate idle? */ |
| 1766 | } |
| 1767 | out: |
| 1768 | __wdccommand_done(chp, xfer); |
| 1769 | WDCDEBUG_PRINT(("__wdccommand_intr returned\n"), DEBUG_INTR); |
| 1770 | return 1; |
| 1771 | } |
| 1772 | |
| 1773 | void |
| 1774 | __wdccommand_done(struct channel_softc *chp, struct wdc_xfer *xfer) |
| 1775 | { |
| 1776 | struct wdc_command *wdc_c = xfer->cmd; |
| 1777 | |
| 1778 | WDCDEBUG_PRINT(("__wdccommand_done %s:%d:%d %02x\n", |
| 1779 | chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive, |
| 1780 | chp->ch_status), DEBUG_FUNCS); |
| 1781 | if (chp->dying) |
| 1782 | goto killit; |
| 1783 | if (chp->ch_status & WDCS_DWF0x20) |
| 1784 | wdc_c->flags |= AT_DF0x0100; |
| 1785 | if (chp->ch_status & WDCS_ERR0x01) { |
| 1786 | wdc_c->flags |= AT_ERROR0x0040; |
| 1787 | wdc_c->r_error = chp->ch_error; |
| 1788 | } |
| 1789 | wdc_c->flags |= AT_DONE0x0020; |
| 1790 | if ((wdc_c->flags & AT_READREG0x0200) != 0 && |
| 1791 | (wdc_c->flags & (AT_ERROR0x0040 | AT_DF0x0100)) == 0) { |
| 1792 | wdc_c->r_head = CHP_READ_REG(chp, wdr_sdh)((chp)->_vtbl->read_reg)(chp, wdr_sdh); |
| 1793 | wdc_c->r_cyl = CHP_READ_REG(chp, wdr_cyl_hi)((chp)->_vtbl->read_reg)(chp, wdr_cyl_hi) << 8; |
| 1794 | wdc_c->r_cyl |= CHP_READ_REG(chp, wdr_cyl_lo)((chp)->_vtbl->read_reg)(chp, wdr_cyl_lo); |
| 1795 | wdc_c->r_sector = CHP_READ_REG(chp, wdr_sector)((chp)->_vtbl->read_reg)(chp, wdr_sector); |
| 1796 | wdc_c->r_count = CHP_READ_REG(chp, wdr_seccnt)((chp)->_vtbl->read_reg)(chp, wdr_seccnt); |
| 1797 | wdc_c->r_error = CHP_READ_REG(chp, wdr_error)((chp)->_vtbl->read_reg)(chp, wdr_error); |
| 1798 | wdc_c->r_features = wdc_c->r_error; |
| 1799 | } |
| 1800 | |
| 1801 | killit: |
| 1802 | if (xfer->c_flags & C_POLL0x0020) { |
| 1803 | wdc_enable_intr(chp); |
| 1804 | } else |
| 1805 | timeout_del(&chp->ch_timo); |
| 1806 | |
| 1807 | wdc_free_xfer(chp, xfer); |
| 1808 | WDCDEBUG_PRINT(("__wdccommand_done before callback\n"), DEBUG_INTR); |
| 1809 | |
| 1810 | if (chp->dying) |
| 1811 | return; |
| 1812 | |
| 1813 | if (wdc_c->flags & AT_WAIT0x0008) |
| 1814 | wakeup(wdc_c); |
| 1815 | else |
| 1816 | if (wdc_c->callback) |
| 1817 | wdc_c->callback(wdc_c->callback_arg); |
| 1818 | wdcstart(chp); |
| 1819 | WDCDEBUG_PRINT(("__wdccommand_done returned\n"), DEBUG_INTR); |
| 1820 | } |
| 1821 | |
| 1822 | /* |
| 1823 | * Send a command. The drive should be ready. |
| 1824 | * Assumes interrupts are blocked. |
| 1825 | */ |
| 1826 | void |
| 1827 | wdccommand(struct channel_softc *chp, u_int8_t drive, u_int8_t command, |
| 1828 | u_int16_t cylin, u_int8_t head, u_int8_t sector, u_int8_t count, |
| 1829 | u_int8_t features) |
| 1830 | { |
| 1831 | WDCDEBUG_PRINT(("wdccommand %s:%d:%d: command=0x%x cylin=%d head=%d " |
| 1832 | "sector=%d count=%d features=%d\n", chp->wdc->sc_dev.dv_xname, |
| 1833 | chp->channel, drive, command, cylin, head, sector, count, features), |
| 1834 | DEBUG_FUNCS); |
| 1835 | WDC_LOG_ATA_CMDLONG(chp, head, features, cylin, cylin >> 8, sector, |
| 1836 | count, command); |
| 1837 | |
| 1838 | /* Select drive, head, and addressing mode. */ |
| 1839 | CHP_WRITE_REG(chp, wdr_sdh, WDSD_IBM | (drive << 4) | head)((chp)->_vtbl->write_reg)(chp, wdr_sdh, 0xa0 | (drive << 4) | head); |
| 1840 | |
| 1841 | /* Load parameters. */ |
| 1842 | CHP_WRITE_REG(chp, wdr_features, features)((chp)->_vtbl->write_reg)(chp, wdr_features, features); |
| 1843 | CHP_WRITE_REG(chp, wdr_cyl_lo, cylin)((chp)->_vtbl->write_reg)(chp, wdr_cyl_lo, cylin); |
| 1844 | CHP_WRITE_REG(chp, wdr_cyl_hi, cylin >> 8)((chp)->_vtbl->write_reg)(chp, wdr_cyl_hi, cylin >> 8); |
| 1845 | CHP_WRITE_REG(chp, wdr_sector, sector)((chp)->_vtbl->write_reg)(chp, wdr_sector, sector); |
| 1846 | CHP_WRITE_REG(chp, wdr_seccnt, count)((chp)->_vtbl->write_reg)(chp, wdr_seccnt, count); |
| 1847 | |
| 1848 | /* Send command. */ |
| 1849 | CHP_WRITE_REG(chp, wdr_command, command)((chp)->_vtbl->write_reg)(chp, wdr_command, command); |
| 1850 | } |
| 1851 | |
| 1852 | /* |
| 1853 | * Send a 48-bit addressing command. The drive should be ready. |
| 1854 | * Assumes interrupts are blocked. |
| 1855 | */ |
| 1856 | void |
| 1857 | wdccommandext(struct channel_softc *chp, u_int8_t drive, u_int8_t command, |
| 1858 | u_int64_t blkno, u_int16_t count) |
| 1859 | { |
| 1860 | WDCDEBUG_PRINT(("wdccommandext %s:%d:%d: command=0x%x blkno=%llu " |
| 1861 | "count=%d\n", chp->wdc->sc_dev.dv_xname, |
| 1862 | chp->channel, drive, command, blkno, count), |
| 1863 | DEBUG_FUNCS); |
| 1864 | WDC_LOG_ATA_CMDEXT(chp, blkno >> 40, blkno >> 16, blkno >> 32, |
| 1865 | blkno >> 8, blkno >> 24, blkno, count >> 8, count, command); |
| 1866 | |
| 1867 | /* Select drive and LBA mode. */ |
| 1868 | CHP_WRITE_REG(chp, wdr_sdh, (drive << 4) | WDSD_LBA)((chp)->_vtbl->write_reg)(chp, wdr_sdh, (drive << 4) | 0x40); |
| 1869 | |
| 1870 | /* Load parameters. */ |
| 1871 | CHP_LBA48_WRITE_REG(chp, wdr_lba_hi,((chp)->_vtbl->lba48_write_reg)(chp, wdr_lba_hi, ((blkno >> 32) & 0xff00) | ((blkno >> 16) & 0xff )) |
| 1872 | ((blkno >> 32) & 0xff00) | ((blkno >> 16) & 0xff))((chp)->_vtbl->lba48_write_reg)(chp, wdr_lba_hi, ((blkno >> 32) & 0xff00) | ((blkno >> 16) & 0xff )); |
| 1873 | CHP_LBA48_WRITE_REG(chp, wdr_lba_mi,((chp)->_vtbl->lba48_write_reg)(chp, wdr_lba_mi, ((blkno >> 24) & 0xff00) | ((blkno >> 8) & 0xff) ) |
| 1874 | ((blkno >> 24) & 0xff00) | ((blkno >> 8) & 0xff))((chp)->_vtbl->lba48_write_reg)(chp, wdr_lba_mi, ((blkno >> 24) & 0xff00) | ((blkno >> 8) & 0xff) ); |
| 1875 | CHP_LBA48_WRITE_REG(chp, wdr_lba_lo,((chp)->_vtbl->lba48_write_reg)(chp, wdr_lba_lo, ((blkno >> 16) & 0xff00) | (blkno & 0xff)) |
| 1876 | ((blkno >> 16) & 0xff00) | (blkno & 0xff))((chp)->_vtbl->lba48_write_reg)(chp, wdr_lba_lo, ((blkno >> 16) & 0xff00) | (blkno & 0xff)); |
| 1877 | CHP_LBA48_WRITE_REG(chp, wdr_seccnt, count)((chp)->_vtbl->lba48_write_reg)(chp, wdr_seccnt, count); |
| 1878 | |
| 1879 | /* Send command. */ |
| 1880 | CHP_WRITE_REG(chp, wdr_command, command)((chp)->_vtbl->write_reg)(chp, wdr_command, command); |
| 1881 | } |
| 1882 | |
| 1883 | /* |
| 1884 | * Simplified version of wdccommand(). Unbusy/ready/drq must be |
| 1885 | * tested by the caller. |
| 1886 | */ |
| 1887 | void |
| 1888 | wdccommandshort(struct channel_softc *chp, int drive, int command) |
| 1889 | { |
| 1890 | |
| 1891 | WDCDEBUG_PRINT(("wdccommandshort %s:%d:%d command 0x%x\n", |
| 1892 | chp->wdc->sc_dev.dv_xname, chp->channel, drive, command), |
| 1893 | DEBUG_FUNCS); |
| 1894 | WDC_LOG_ATA_CMDSHORT(chp, command); |
| 1895 | |
| 1896 | /* Select drive. */ |
| 1897 | CHP_WRITE_REG(chp, wdr_sdh, WDSD_IBM | (drive << 4))((chp)->_vtbl->write_reg)(chp, wdr_sdh, 0xa0 | (drive << 4)); |
| 1898 | CHP_WRITE_REG(chp, wdr_command, command)((chp)->_vtbl->write_reg)(chp, wdr_command, command); |
| 1899 | } |
| 1900 | |
| 1901 | /* Add a command to the queue and start controller. Must be called at splbio */ |
| 1902 | |
| 1903 | void |
| 1904 | wdc_exec_xfer(struct channel_softc *chp, struct wdc_xfer *xfer) |
| 1905 | { |
| 1906 | WDCDEBUG_PRINT(("wdc_exec_xfer %p flags 0x%x channel %d drive %d\n", |
| 1907 | xfer, xfer->c_flags, chp->channel, xfer->drive), DEBUG_XFERS); |
| 1908 | |
| 1909 | /* complete xfer setup */ |
| 1910 | xfer->chp = chp; |
| 1911 | |
| 1912 | /* |
| 1913 | * If we are a polled command, and the list is not empty, |
| 1914 | * we are doing a dump. Drop the list to allow the polled command |
| 1915 | * to complete, we're going to reboot soon anyway. |
| 1916 | */ |
| 1917 | if ((xfer->c_flags & C_POLL0x0020) != 0 && |
| 1918 | !TAILQ_EMPTY(&chp->ch_queue->sc_xfer)(((&chp->ch_queue->sc_xfer)->tqh_first) == ((void *)0))) { |
| 1919 | TAILQ_INIT(&chp->ch_queue->sc_xfer)do { (&chp->ch_queue->sc_xfer)->tqh_first = ((void *)0); (&chp->ch_queue->sc_xfer)->tqh_last = & (&chp->ch_queue->sc_xfer)->tqh_first; } while (0 ); |
| 1920 | } |
| 1921 | /* insert at the end of command list */ |
| 1922 | TAILQ_INSERT_TAIL(&chp->ch_queue->sc_xfer,xfer , c_xferchain)do { (xfer)->c_xferchain.tqe_next = ((void *)0); (xfer)-> c_xferchain.tqe_prev = (&chp->ch_queue->sc_xfer)-> tqh_last; *(&chp->ch_queue->sc_xfer)->tqh_last = (xfer); (&chp->ch_queue->sc_xfer)->tqh_last = & (xfer)->c_xferchain.tqe_next; } while (0); |
| 1923 | WDCDEBUG_PRINT(("wdcstart from wdc_exec_xfer, flags 0x%x\n", |
| 1924 | chp->ch_flags), DEBUG_XFERS); |
| 1925 | wdcstart(chp); |
| 1926 | } |
| 1927 | |
| 1928 | void * |
| 1929 | wdc_xfer_get(void *null) |
| 1930 | { |
| 1931 | return (pool_get(&wdc_xfer_pool, PR_NOWAIT0x0002 | PR_ZERO0x0008)); |
| 1932 | } |
| 1933 | |
| 1934 | void |
| 1935 | wdc_scrub_xfer(struct wdc_xfer *xfer) |
| 1936 | { |
| 1937 | memset(xfer, 0, sizeof(*xfer))__builtin_memset((xfer), (0), (sizeof(*xfer))); |
| 1938 | xfer->c_flags = C_SCSIXFER0x0800; |
| 1939 | } |
| 1940 | |
| 1941 | void |
| 1942 | wdc_xfer_put(void *null, void *xxfer) |
| 1943 | { |
| 1944 | struct wdc_xfer *xfer = xxfer; |
| 1945 | int put = 0; |
| 1946 | int s; |
| 1947 | |
| 1948 | s = splbio()splraise(0x3); |
| 1949 | if (ISSET(xfer->c_flags, C_SCSIXFER)((xfer->c_flags) & (0x0800))) |
| 1950 | CLR(xfer->c_flags, C_SCSIXFER)((xfer->c_flags) &= ~(0x0800)); |
| 1951 | else |
| 1952 | put = 1; |
| 1953 | splx(s)spllower(s); |
| 1954 | |
| 1955 | if (put) |
| 1956 | pool_put(&wdc_xfer_pool, xfer); |
| 1957 | } |
| 1958 | |
| 1959 | struct wdc_xfer * |
| 1960 | wdc_get_xfer(int flags) |
| 1961 | { |
| 1962 | return (scsi_io_get(&wdc_xfer_iopool, |
| 1963 | ISSET(flags, WDC_NOSLEEP)((flags) & (0x01)) ? SCSI_NOSLEEP0x00001 : 0)); |
| 1964 | } |
| 1965 | |
| 1966 | void |
| 1967 | wdc_free_xfer(struct channel_softc *chp, struct wdc_xfer *xfer) |
| 1968 | { |
| 1969 | int put = 0; |
| 1970 | int s; |
| 1971 | |
| 1972 | if (xfer->c_flags & C_PRIVATEXFER0x0400) { |
| 1973 | chp->ch_flags &= ~WDCF_ACTIVE0x01; |
| 1974 | TAILQ_REMOVE(&chp->ch_queue->sc_xfer, xfer, c_xferchain)do { if (((xfer)->c_xferchain.tqe_next) != ((void *)0)) (xfer )->c_xferchain.tqe_next->c_xferchain.tqe_prev = (xfer)-> c_xferchain.tqe_prev; else (&chp->ch_queue->sc_xfer )->tqh_last = (xfer)->c_xferchain.tqe_prev; *(xfer)-> c_xferchain.tqe_prev = (xfer)->c_xferchain.tqe_next; ((xfer )->c_xferchain.tqe_prev) = ((void *)-1); ((xfer)->c_xferchain .tqe_next) = ((void *)-1); } while (0); |
| 1975 | return; |
| 1976 | } |
| 1977 | |
| 1978 | s = splbio()splraise(0x3); |
| 1979 | chp->ch_flags &= ~WDCF_ACTIVE0x01; |
| 1980 | TAILQ_REMOVE(&chp->ch_queue->sc_xfer, xfer, c_xferchain)do { if (((xfer)->c_xferchain.tqe_next) != ((void *)0)) (xfer )->c_xferchain.tqe_next->c_xferchain.tqe_prev = (xfer)-> c_xferchain.tqe_prev; else (&chp->ch_queue->sc_xfer )->tqh_last = (xfer)->c_xferchain.tqe_prev; *(xfer)-> c_xferchain.tqe_prev = (xfer)->c_xferchain.tqe_next; ((xfer )->c_xferchain.tqe_prev) = ((void *)-1); ((xfer)->c_xferchain .tqe_next) = ((void *)-1); } while (0); |
| 1981 | if (ISSET(xfer->c_flags, C_SCSIXFER)((xfer->c_flags) & (0x0800))) |
| 1982 | CLR(xfer->c_flags, C_SCSIXFER)((xfer->c_flags) &= ~(0x0800)); |
| 1983 | else |
| 1984 | put = 1; |
| 1985 | splx(s)spllower(s); |
| 1986 | |
| 1987 | if (put) |
| 1988 | scsi_io_put(&wdc_xfer_iopool, xfer); |
| 1989 | } |
| 1990 | |
| 1991 | |
| 1992 | /* |
| 1993 | * Kill off all pending xfers for a channel_softc. |
| 1994 | * |
| 1995 | * Must be called at splbio(). |
| 1996 | */ |
| 1997 | void |
| 1998 | wdc_kill_pending(struct channel_softc *chp) |
| 1999 | { |
| 2000 | struct wdc_xfer *xfer; |
| 2001 | |
| 2002 | while ((xfer = TAILQ_FIRST(&chp->ch_queue->sc_xfer)((&chp->ch_queue->sc_xfer)->tqh_first)) != NULL((void *)0)) { |
| 2003 | chp = xfer->chp; |
| 2004 | (*xfer->c_kill_xfer)(chp, xfer); |
| 2005 | } |
| 2006 | } |
| 2007 | |
| 2008 | void |
| 2009 | __wdcerror(struct channel_softc *chp, char *msg) |
| 2010 | { |
| 2011 | struct wdc_xfer *xfer = TAILQ_FIRST(&chp->ch_queue->sc_xfer)((&chp->ch_queue->sc_xfer)->tqh_first); |
| 2012 | if (xfer == NULL((void *)0)) |
| 2013 | printf("%s:%d: %s\n", chp->wdc->sc_dev.dv_xname, chp->channel, |
| 2014 | msg); |
| 2015 | else |
| 2016 | printf("%s(%s:%d:%d): %s\n", |
| 2017 | chp->ch_drive[xfer->drive].drive_name, |
| 2018 | chp->wdc->sc_dev.dv_xname, |
| 2019 | chp->channel, xfer->drive, msg); |
| 2020 | } |
| 2021 | |
| 2022 | /* |
| 2023 | * the bit bucket |
| 2024 | */ |
| 2025 | void |
| 2026 | wdcbit_bucket(struct channel_softc *chp, int size) |
| 2027 | { |
| 2028 | CHP_READ_RAW_MULTI_2(chp, NULL, size)((chp)->_vtbl->read_raw_multi_2)(chp, ((void *)0), size ); |
| 2029 | } |
| 2030 | |
| 2031 | |
| 2032 | #include <sys/ataio.h> |
| 2033 | #include <sys/fcntl.h> |
| 2034 | |
| 2035 | int wdc_ioc_ata_cmd(struct ata_drive_datas *, atareq_t *); |
| 2036 | |
| 2037 | int |
| 2038 | wdc_ioc_ata_cmd(struct ata_drive_datas *drvp, atareq_t *atareq) |
| 2039 | { |
| 2040 | struct wdc_command wdc_c; |
| 2041 | int err = 0; |
| 2042 | |
| 2043 | /* |
| 2044 | * Make sure a timeout was supplied in the ioctl request |
| 2045 | */ |
| 2046 | if (atareq->timeout == 0) |
| 2047 | return (EINVAL22); |
| 2048 | |
| 2049 | if (atareq->datalen > MAXPHYS(64 * 1024)) |
| 2050 | return (EINVAL22); |
| 2051 | |
| 2052 | bzero(&wdc_c, sizeof(wdc_c))__builtin_bzero((&wdc_c), (sizeof(wdc_c))); |
| 2053 | |
| 2054 | if (atareq->datalen > 0) { |
| 2055 | wdc_c.data = dma_alloc(atareq->datalen, PR_NOWAIT0x0002 | PR_ZERO0x0008); |
| 2056 | if (wdc_c.data == NULL((void *)0)) { |
| 2057 | err = ENOMEM12; |
| 2058 | goto err; |
| 2059 | } |
| 2060 | wdc_c.bcount = atareq->datalen; |
| 2061 | } |
| 2062 | |
| 2063 | wdc_c.flags = AT_WAIT0x0008; |
| 2064 | if (atareq->flags & ATACMD_READ0x00000001) |
| 2065 | wdc_c.flags |= AT_READ0x0001; |
| 2066 | if (atareq->flags & ATACMD_WRITE0x00000002) { |
| 2067 | if (atareq->datalen > 0) { |
| 2068 | err = copyin(atareq->databuf, wdc_c.data, |
| 2069 | atareq->datalen); |
| 2070 | if (err != 0) |
| 2071 | goto err; |
| 2072 | } |
| 2073 | wdc_c.flags |= AT_WRITE0x0002; |
| 2074 | } |
| 2075 | if (atareq->flags & ATACMD_READREG0x00000004) |
| 2076 | wdc_c.flags |= AT_READREG0x0200; |
| 2077 | |
| 2078 | wdc_c.timeout = atareq->timeout; |
| 2079 | wdc_c.r_command = atareq->command; |
| 2080 | wdc_c.r_head = atareq->head & 0x0f; |
| 2081 | wdc_c.r_cyl = atareq->cylinder; |
| 2082 | wdc_c.r_sector = atareq->sec_num; |
| 2083 | wdc_c.r_count = atareq->sec_count; |
| 2084 | wdc_c.r_features = atareq->features; |
| 2085 | if (drvp->drive_flags & DRIVE_ATAPI0x0002) { |
| 2086 | if (wdc_c.r_command == WDCC_IDENTIFY0xec) |
| 2087 | wdc_c.r_command = ATAPI_IDENTIFY_DEVICE0xa1; |
| 2088 | } else { |
| 2089 | wdc_c.r_st_bmask = WDCS_DRDY0x40; |
| 2090 | wdc_c.r_st_pmask = WDCS_DRDY0x40; |
| 2091 | } |
| 2092 | |
| 2093 | if (wdc_exec_command(drvp, &wdc_c) != WDC_COMPLETE0x01) { |
| 2094 | atareq->retsts = ATACMD_ERROR0x02; |
| 2095 | goto copyout; |
| 2096 | } |
| 2097 | |
| 2098 | if (wdc_c.flags & (AT_ERROR0x0040 | AT_TIMEOU0x0080 | AT_DF0x0100)) { |
| 2099 | if (wdc_c.flags & AT_ERROR0x0040) { |
| 2100 | atareq->retsts = ATACMD_ERROR0x02; |
| 2101 | atareq->error = wdc_c.r_error; |
| 2102 | } else if (wdc_c.flags & AT_DF0x0100) |
| 2103 | atareq->retsts = ATACMD_DF0x03; |
| 2104 | else |
| 2105 | atareq->retsts = ATACMD_TIMEOUT0x01; |
| 2106 | } else { |
| 2107 | atareq->retsts = ATACMD_OK0x00; |
| 2108 | if (atareq->flags & ATACMD_READREG0x00000004) { |
| 2109 | atareq->head = wdc_c.r_head; |
| 2110 | atareq->cylinder = wdc_c.r_cyl; |
| 2111 | atareq->sec_num = wdc_c.r_sector; |
| 2112 | atareq->sec_count = wdc_c.r_count; |
| 2113 | atareq->features = wdc_c.r_features; |
| 2114 | atareq->error = wdc_c.r_error; |
| 2115 | } |
| 2116 | } |
| 2117 | |
| 2118 | copyout: |
| 2119 | if (atareq->datalen > 0 && atareq->flags & ATACMD_READ0x00000001) { |
| 2120 | err = copyout(wdc_c.data, atareq->databuf, atareq->datalen); |
| 2121 | if (err != 0) |
| 2122 | goto err; |
| 2123 | } |
| 2124 | |
| 2125 | err: |
| 2126 | if (wdc_c.data) |
| 2127 | dma_free(wdc_c.data, atareq->datalen); |
| 2128 | return (err); |
| 2129 | } |
| 2130 | |
| 2131 | int |
| 2132 | wdc_ioctl(struct ata_drive_datas *drvp, u_long xfer, caddr_t addr, int flag, |
| 2133 | struct proc *p) |
| 2134 | { |
| 2135 | int error = 0; |
| 2136 | |
| 2137 | switch (xfer) { |
| 2138 | #ifdef WDCDEBUG |
| 2139 | case ATAIOGETTRACE(((unsigned long)0x80000000|(unsigned long)0x40000000) | ((sizeof (struct atagettrace) & 0x1fff) << 16) | ((('Q')) << 8) | ((27))): { |
| 2140 | atagettrace_t *agt = (atagettrace_t *)addr; |
| 2141 | unsigned int size = 0; |
| 2142 | char *log_to_copy; |
| 2143 | |
| 2144 | size = agt->buf_size; |
| 2145 | if (size > 65536) { |
| 2146 | size = 65536; |
| 2147 | } |
| 2148 | |
| 2149 | log_to_copy = wdc_get_log(&size, &agt->bytes_left); |
| 2150 | |
| 2151 | if (log_to_copy != NULL((void *)0)) { |
| 2152 | error = copyout(log_to_copy, agt->buf, size); |
| 2153 | free(log_to_copy, M_TEMP127, 0); |
| 2154 | } |
| 2155 | |
| 2156 | agt->bytes_copied = size; |
| 2157 | break; |
| 2158 | } |
| 2159 | #endif /* WDCDEBUG */ |
| 2160 | |
| 2161 | case ATAIOCCOMMAND(((unsigned long)0x80000000|(unsigned long)0x40000000) | ((sizeof (atareq_t) & 0x1fff) << 16) | ((('Q')) << 8) | ((8))): { |
| 2162 | atareq_t *atareq = (atareq_t *)addr; |
| 2163 | |
| 2164 | /* |
| 2165 | * Make sure this command is (relatively) safe first |
| 2166 | */ |
| 2167 | if ((flag & FWRITE0x0002) == 0 && atareq->flags & ATACMD_WRITE0x00000002) |
| 2168 | error = EPERM1; |
| 2169 | else |
| 2170 | error = wdc_ioc_ata_cmd(drvp, atareq); |
| 2171 | break; |
| 2172 | } |
| 2173 | |
| 2174 | default: |
| 2175 | error = ENOTTY25; |
| 2176 | goto exit; |
| 2177 | } |
| 2178 | |
| 2179 | exit: |
| 2180 | return (error); |
| 2181 | } |