/usr/src/sys/dev/pci/ixgbe

Bug Summary

File:	dev/pci/ixgbe_x550.c
Warning:	line 2518, column 2 Value stored to 'status' is never read

Annotated Source Code

Press '?' to see keyboard shortcuts

Show analyzer invocation

clang -cc1 -cc1 -triple amd64-unknown-openbsd7.4 -analyze -disable-free -clear-ast-before-backend -disable-llvm-verifier -discard-value-names -main-file-name ixgbe_x550.c -analyzer-checker=core -analyzer-checker=apiModeling -analyzer-checker=unix -analyzer-checker=deadcode -analyzer-checker=security.insecureAPI.UncheckedReturn -analyzer-checker=security.insecureAPI.getpw -analyzer-checker=security.insecureAPI.gets -analyzer-checker=security.insecureAPI.mktemp -analyzer-checker=security.insecureAPI.mkstemp -analyzer-checker=security.insecureAPI.vfork -analyzer-checker=nullability.NullPassedToNonnull -analyzer-checker=nullability.NullReturnedFromNonnull -analyzer-output plist -w -setup-static-analyzer -mrelocation-model static -mframe-pointer=all -relaxed-aliasing -ffp-contract=on -fno-rounding-math -mconstructor-aliases -ffreestanding -mcmodel=kernel -target-cpu x86-64 -target-feature +retpoline-indirect-calls -target-feature +retpoline-indirect-branches -target-feature -sse2 -target-feature -sse -target-feature -3dnow -target-feature -mmx -target-feature +save-args -target-feature +retpoline-external-thunk -disable-red-zone -no-implicit-float -tune-cpu generic -debugger-tuning=gdb -fcoverage-compilation-dir=/usr/src/sys/arch/amd64/compile/GENERIC.MP/obj -nostdsysteminc -nobuiltininc -resource-dir /usr/local/llvm16/lib/clang/16 -I /usr/src/sys -I /usr/src/sys/arch/amd64/compile/GENERIC.MP/obj -I /usr/src/sys/arch -I /usr/src/sys/dev/pci/drm/include -I /usr/src/sys/dev/pci/drm/include/uapi -I /usr/src/sys/dev/pci/drm/amd/include/asic_reg -I /usr/src/sys/dev/pci/drm/amd/include -I /usr/src/sys/dev/pci/drm/amd/amdgpu -I /usr/src/sys/dev/pci/drm/amd/display -I /usr/src/sys/dev/pci/drm/amd/display/include -I /usr/src/sys/dev/pci/drm/amd/display/dc -I /usr/src/sys/dev/pci/drm/amd/display/amdgpu_dm -I /usr/src/sys/dev/pci/drm/amd/pm/inc -I /usr/src/sys/dev/pci/drm/amd/pm/legacy-dpm -I /usr/src/sys/dev/pci/drm/amd/pm/swsmu -I /usr/src/sys/dev/pci/drm/amd/pm/swsmu/inc -I /usr/src/sys/dev/pci/drm/amd/pm/swsmu/smu11 -I /usr/src/sys/dev/pci/drm/amd/pm/swsmu/smu12 -I /usr/src/sys/dev/pci/drm/amd/pm/swsmu/smu13 -I /usr/src/sys/dev/pci/drm/amd/pm/powerplay/inc -I /usr/src/sys/dev/pci/drm/amd/pm/powerplay/hwmgr -I /usr/src/sys/dev/pci/drm/amd/pm/powerplay/smumgr -I /usr/src/sys/dev/pci/drm/amd/pm/swsmu/inc -I /usr/src/sys/dev/pci/drm/amd/pm/swsmu/inc/pmfw_if -I /usr/src/sys/dev/pci/drm/amd/display/dc/inc -I /usr/src/sys/dev/pci/drm/amd/display/dc/inc/hw -I /usr/src/sys/dev/pci/drm/amd/display/dc/clk_mgr -I /usr/src/sys/dev/pci/drm/amd/display/modules/inc -I /usr/src/sys/dev/pci/drm/amd/display/modules/hdcp -I /usr/src/sys/dev/pci/drm/amd/display/dmub/inc -I /usr/src/sys/dev/pci/drm/i915 -D DDB -D DIAGNOSTIC -D KTRACE -D ACCOUNTING -D KMEMSTATS -D PTRACE -D POOL_DEBUG -D CRYPTO -D SYSVMSG -D SYSVSEM -D SYSVSHM -D UVM_SWAP_ENCRYPT -D FFS -D FFS2 -D FFS_SOFTUPDATES -D UFS_DIRHASH -D QUOTA -D EXT2FS -D MFS -D NFSCLIENT -D NFSSERVER -D CD9660 -D UDF -D MSDOSFS -D FIFO -D FUSE -D SOCKET_SPLICE -D TCP_ECN -D TCP_SIGNATURE -D INET6 -D IPSEC -D PPP_BSDCOMP -D PPP_DEFLATE -D PIPEX -D MROUTING -D MPLS -D BOOT_CONFIG -D USER_PCICONF -D APERTURE -D MTRR -D NTFS -D SUSPEND -D HIBERNATE -D PCIVERBOSE -D USBVERBOSE -D WSDISPLAY_COMPAT_USL -D WSDISPLAY_COMPAT_RAWKBD -D WSDISPLAY_DEFAULTSCREENS=6 -D X86EMU -D ONEWIREVERBOSE -D MULTIPROCESSOR -D MAXUSERS=80 -D _KERNEL -O2 -Wno-pointer-sign -Wno-address-of-packed-member -Wno-constant-conversion -Wno-unused-but-set-variable -Wno-gnu-folding-constant -fdebug-compilation-dir=/usr/src/sys/arch/amd64/compile/GENERIC.MP/obj -ferror-limit 19 -fwrapv -D_RET_PROTECTOR -ret-protector -fcf-protection=branch -fgnuc-version=4.2.1 -vectorize-loops -vectorize-slp -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-valloc -fno-builtin-free -fno-builtin-strdup -fno-builtin-strndup -analyzer-output=html -faddrsig -o /home/ben/Projects/scan/2024-01-11-110808-61670-1 -x c /usr/src/sys/dev/pci/ixgbe_x550.c

1	/* $OpenBSD: ixgbe_x550.c,v 1.8 2022/01/09 05:42:56 jsg Exp $ */
2
3	/******************************************************************************
4
5	Copyright (c) 2001-2017, Intel Corporation
6	All rights reserved.
7
8	Redistribution and use in source and binary forms, with or without
9	modification, are permitted provided that the following conditions are met:
10
11	1. Redistributions of source code must retain the above copyright notice,
12	this list of conditions and the following disclaimer.
13
14	2. Redistributions in binary form must reproduce the above copyright
15	notice, this list of conditions and the following disclaimer in the
16	documentation and/or other materials provided with the distribution.
17
18	3. Neither the name of the Intel Corporation nor the names of its
19	contributors may be used to endorse or promote products derived from
20	this software without specific prior written permission.
21
22	THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
23	AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24	IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25	ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
26	LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27	CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32	POSSIBILITY OF SUCH DAMAGE.
33
34	******************************************************************************/
35	/$FreeBSD: head/sys/dev/ixgbe/ixgbe_x550.c 333870 2018-05-19 05:57:26Z mmacy $/
36
37	#include <dev/pci/ixgbe.h>
38	#include <dev/pci/ixgbe_type.h>
39
40	extern int32_t ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw);
41	extern int32_t ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, uint32_t mask);
42	extern void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, uint32_t mask);
43
44	int32_t ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *, uint32_t mask);
45	void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *, uint32_t mask);
46	int32_t ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw);
47
48	int32_t ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
49	ixgbe_link_speed speed,
50	bool_Bool autoneg_wait_to_complete);
51
52	int32_t ixgbe_dmac_config_X550(struct ixgbe_hw *hw);
53	int32_t ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw);
54	int32_t ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw);
55
56	int32_t ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw);
57	int32_t ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw);
58	int32_t ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw);
59	int32_t ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw);
60	int32_t ixgbe_calc_checksum_X550(struct ixgbe_hw hw, uint16_t buffer,
61	uint32_t buffer_size);
62	int32_t ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw,
63	uint16_t *checksum_val);
64	int32_t ixgbe_update_flash_X550(struct ixgbe_hw *hw);
65	int32_t ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, uint16_t offset,
66	uint16_t data);
67	int32_t ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
68	uint16_t offset, uint16_t words,
69	uint16_t *data);
70	int32_t ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, uint16_t offset,
71	uint16_t *data);
72	int32_t ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, uint16_t offset,
73	uint16_t data);
74	void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool_Bool enable,
75	unsigned int pool);
76	int32_t ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, uint32_t reg_addr,
77	uint32_t device_type, uint32_t data);
78	int32_t ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, uint32_t reg_addr,
79	uint32_t device_type, uint32_t *data);
80	int32_t ixgbe_get_phy_token(struct ixgbe_hw *);
81	int32_t ixgbe_put_phy_token(struct ixgbe_hw *);
82	int32_t ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
83	uint32_t device_type, uint32_t data);
84	int32_t ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
85	uint32_t device_type, uint32_t *data);
86	enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw);
87	int32_t ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw);
88	int32_t ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
89	ixgbe_link_speed *speed,
90	bool_Bool *autoneg);
91	void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw);
92	int32_t ixgbe_reset_hw_X550em(struct ixgbe_hw *hw);
93	int32_t ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw);
94	int32_t ixgbe_setup_kr_x550em(struct ixgbe_hw *hw);
95	int32_t ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw);
96	int32_t ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw);
97	int32_t ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw);
98	uint64_t ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw);
99	void ixgbe_disable_rx_x550(struct ixgbe_hw *hw);
100	int32_t ixgbe_get_lcd_t_x550em(struct ixgbe_hw hw, ixgbe_link_speed lcd_speed);
101	int32_t ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw);
102	int32_t ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, uint32_t mask);
103	void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, uint32_t mask);
104	int32_t ixgbe_setup_fc_X550em(struct ixgbe_hw *hw);
105	int32_t ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
106	ixgbe_link_speed speed,
107	bool_Bool autoneg_wait_to_complete);
108	int32_t ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
109	uint32_t device_type, uint16_t *phy_data);
110	int32_t ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
111	uint32_t device_type, uint16_t phy_data);
112	int32_t ixgbe_setup_fc_fiber_x550em_a(struct ixgbe_hw *hw);
113	int32_t ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw);
114	int32_t ixgbe_setup_fc_sgmii_x550em_a(struct ixgbe_hw *hw);
115	void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw);
116	void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw);
117	void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw);
118	int32_t ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw);
119	int32_t ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
120	ixgbe_link_speed speed,
121	bool_Bool autoneg_wait_to_complete);
122	int32_t ixgbe_check_link_t_X550em(struct ixgbe_hw hw, ixgbe_link_speed speed,
123	bool_Bool *link_up, bool_Bool link_up_wait_to_complete);
124	int32_t ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw);
125	int32_t ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw);
126	int32_t ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, uint32_t led_idx);
127	int32_t ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, uint32_t led_idx);
128
129	int32_t ixgbe_setup_ixfi_x550em(struct ixgbe_hw hw, ixgbe_link_speed speed);
130
131
132	/**
133	* ixgbe_init_ops_X550 - Inits func ptrs and MAC type
134	* @hw: pointer to hardware structure
135	*
136	* Initialize the function pointers and assign the MAC type for X550.
137	* Does not touch the hardware.
138	**/
139	int32_t ixgbe_init_ops_X550(struct ixgbe_hw *hw)
140	{
141	struct ixgbe_mac_info *mac = &hw->mac;
142	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
143	int32_t ret_val;
144
145	DEBUGFUNC("ixgbe_init_ops_X550");;
146
147	ret_val = ixgbe_init_ops_X540(hw);
148	mac->ops.dmac_config = ixgbe_dmac_config_X550;
149	mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550;
150	mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550;
151	mac->ops.setup_eee = NULL((void *)0);
152	mac->ops.set_source_address_pruning =
153	ixgbe_set_source_address_pruning_X550;
154
155	eeprom->ops.init_params = ixgbe_init_eeprom_params_X550;
156	eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
157	eeprom->ops.read = ixgbe_read_ee_hostif_X550;
158	eeprom->ops.write = ixgbe_write_ee_hostif_X550;
159	eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
160	eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
161
162	mac->ops.disable_rx = ixgbe_disable_rx_x550;
163	switch (hw->device_id) {
164	case IXGBE_DEV_ID_X550EM_X_1G_T0x15AE:
165	hw->mac.ops.led_on = NULL((void *)0);
166	hw->mac.ops.led_off = NULL((void *)0);
167	break;
168	case IXGBE_DEV_ID_X550EM_X_10G_T0x15AD:
169	case IXGBE_DEV_ID_X550EM_A_10G_T0x15C8:
170	hw->mac.ops.led_on = ixgbe_led_on_t_X550em;
171	hw->mac.ops.led_off = ixgbe_led_off_t_X550em;
172	break;
173	default:
174	break;
175	}
176	return ret_val;
177	}
178
179	/**
180	* ixgbe_read_cs4227 - Read CS4227 register
181	* @hw: pointer to hardware structure
182	* @reg: register number to write
183	* @value: pointer to receive value read
184	*
185	* Returns status code
186	**/
187	int32_t ixgbe_read_cs4227(struct ixgbe_hw hw, uint16_t reg, uint16_t value)
188	{
189	return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value);
190	}
191
192	/**
193	* ixgbe_write_cs4227 - Write CS4227 register
194	* @hw: pointer to hardware structure
195	* @reg: register number to write
196	* @value: value to write to register
197	*
198	* Returns status code
199	**/
200	int32_t ixgbe_write_cs4227(struct ixgbe_hw *hw, uint16_t reg, uint16_t value)
201	{
202	return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value);
203	}
204
205	/**
206	* ixgbe_read_pe - Read register from port expander
207	* @hw: pointer to hardware structure
208	* @reg: register number to read
209	* @value: pointer to receive read value
210	*
211	* Returns status code
212	**/
213	int32_t ixgbe_read_pe(struct ixgbe_hw hw, uint8_t reg, uint8_t value)
214	{
215	int32_t status = IXGBE_NOT_IMPLEMENTED0x7FFFFFFF;
216
217	if (hw->phy.ops.read_i2c_byte_unlocked)
218	status = hw->phy.ops.read_i2c_byte_unlocked(hw, reg, IXGBE_PE0xE0,
219	value);
220	if (status != IXGBE_SUCCESS0)
221	ERROR_REPORT2(IXGBE_ERROR_CAUTION,
222	"port expander access failed with %d\n", status);
223	return status;
224	}
225
226	/**
227	* ixgbe_write_pe - Write register to port expander
228	* @hw: pointer to hardware structure
229	* @reg: register number to write
230	* @value: value to write
231	*
232	* Returns status code
233	**/
234	int32_t ixgbe_write_pe(struct ixgbe_hw *hw, uint8_t reg, uint8_t value)
235	{
236	int32_t status = IXGBE_NOT_IMPLEMENTED0x7FFFFFFF;
237
238	if (hw->phy.ops.write_i2c_byte_unlocked)
239	status = hw->phy.ops.write_i2c_byte_unlocked(hw, reg, IXGBE_PE0xE0,
240	value);
241	if (status != IXGBE_SUCCESS0)
242	ERROR_REPORT2(IXGBE_ERROR_CAUTION,
243	"port expander access failed with %d\n", status);
244	return status;
245	}
246
247	/**
248	* ixgbe_reset_cs4227 - Reset CS4227 using port expander
249	* @hw: pointer to hardware structure
250	*
251	* This function assumes that the caller has acquired the proper semaphore.
252	* Returns error code
253	**/
254	int32_t ixgbe_reset_cs4227(struct ixgbe_hw *hw)
255	{
256	int32_t status;
257	uint32_t retry;
258	uint16_t value;
259	uint8_t reg;
260
261	/* Trigger hard reset. */
262	status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT1, &reg);
263	if (status != IXGBE_SUCCESS0)
264	return status;
265	reg \|= IXGBE_PE_BIT1(1 << 1);
266	status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT1, reg);
267	if (status != IXGBE_SUCCESS0)
268	return status;
269
270	status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG3, &reg);
271	if (status != IXGBE_SUCCESS0)
272	return status;
273	reg &= ~IXGBE_PE_BIT1(1 << 1);
274	status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG3, reg);
275	if (status != IXGBE_SUCCESS0)
276	return status;
277
278	status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT1, &reg);
279	if (status != IXGBE_SUCCESS0)
280	return status;
281	reg &= ~IXGBE_PE_BIT1(1 << 1);
282	status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT1, reg);
283	if (status != IXGBE_SUCCESS0)
284	return status;
285
286	usec_delay(IXGBE_CS4227_RESET_HOLD)(*delay_func)(500);
287
288	status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT1, &reg);
289	if (status != IXGBE_SUCCESS0)
290	return status;
291	reg \|= IXGBE_PE_BIT1(1 << 1);
292	status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT1, reg);
293	if (status != IXGBE_SUCCESS0)
294	return status;
295
296	/* Wait for the reset to complete. */
297	msec_delay(IXGBE_CS4227_RESET_DELAY)(delay_func)(1000 (450));
298	for (retry = 0; retry < IXGBE_CS4227_RETRIES15; retry++) {
299	status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS0x0181,
300	&value);
301	if (status == IXGBE_SUCCESS0 &&
302	value == IXGBE_CS4227_EEPROM_LOAD_OK0x0001)
303	break;
304	msec_delay(IXGBE_CS4227_CHECK_DELAY)(delay_func)(1000 (30));
305	}
306	if (retry == IXGBE_CS4227_RETRIES15) {
307	ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
308	"CS4227 reset did not complete.");
309	return IXGBE_ERR_PHY-3;
310	}
311
312	status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS0x5001, &value);
313	if (status != IXGBE_SUCCESS0 \|\|
314	!(value & IXGBE_CS4227_EEPROM_LOAD_OK0x0001)) {
315	ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
316	"CS4227 EEPROM did not load successfully.");
317	return IXGBE_ERR_PHY-3;
318	}
319
320	return IXGBE_SUCCESS0;
321	}
322
323	/**
324	* ixgbe_check_cs4227 - Check CS4227 and reset as needed
325	* @hw: pointer to hardware structure
326	**/
327	void ixgbe_check_cs4227(struct ixgbe_hw *hw)
328	{
329	int32_t status = IXGBE_SUCCESS0;
330	uint32_t swfw_mask = hw->phy.phy_semaphore_mask;
331	uint16_t value = 0;
332	uint8_t retry;
333
334	for (retry = 0; retry < IXGBE_CS4227_RETRIES15; retry++) {
335	status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
336	if (status != IXGBE_SUCCESS0) {
337	ERROR_REPORT2(IXGBE_ERROR_CAUTION,
338	"semaphore failed with %d", status);
339	msec_delay(IXGBE_CS4227_CHECK_DELAY)(delay_func)(1000 (30));
340	continue;
341	}
342
343	/* Get status of reset flow. */
344	status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH2, &value);
345
346	if (status == IXGBE_SUCCESS0 &&
347	value == IXGBE_CS4227_RESET_COMPLETE0x5AA5)
348	goto out;
349
350	if (status != IXGBE_SUCCESS0 \|\|
351	value != IXGBE_CS4227_RESET_PENDING0x1357)
352	break;
353
354	/* Reset is pending. Wait and check again. */
355	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
356	msec_delay(IXGBE_CS4227_CHECK_DELAY)(delay_func)(1000 (30));
357	}
358
359	/* If still pending, assume other instance failed. */
360	if (retry == IXGBE_CS4227_RETRIES15) {
361	status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
362	if (status != IXGBE_SUCCESS0) {
363	ERROR_REPORT2(IXGBE_ERROR_CAUTION,
364	"semaphore failed with %d", status);
365	return;
366	}
367	}
368
369	/* Reset the CS4227. */
370	status = ixgbe_reset_cs4227(hw);
371	if (status != IXGBE_SUCCESS0) {
372	ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
373	"CS4227 reset failed: %d", status);
374	goto out;
375	}
376
377	/* Reset takes so long, temporarily release semaphore in case the
378	* other driver instance is waiting for the reset indication.
379	*/
380	ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH2,
381	IXGBE_CS4227_RESET_PENDING0x1357);
382	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
383	msec_delay(10)(delay_func)(1000 (10));
384	status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
385	if (status != IXGBE_SUCCESS0) {
386	ERROR_REPORT2(IXGBE_ERROR_CAUTION,
387	"semaphore failed with %d", status);
388	return;
389	}
390
391	/* Record completion for next time. */
392	status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH2,
393	IXGBE_CS4227_RESET_COMPLETE0x5AA5);
394
395	out:
396	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
397	msec_delay(hw->eeprom.semaphore_delay)(delay_func)(1000 (hw->eeprom.semaphore_delay));
398	}
399
400	/**
401	* ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
402	* @hw: pointer to hardware structure
403	**/
404	void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
405	{
406	uint32_t esdp = IXGBE_READ_REG(hw, IXGBE_ESDP)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00020 )));
407
408	if (hw->bus.lan_id) {
409	esdp &= ~(IXGBE_ESDP_SDP1_NATIVE0x00020000 \| IXGBE_ESDP_SDP10x00000002);
410	esdp \|= IXGBE_ESDP_SDP1_DIR0x00000200;
411	}
412	esdp &= ~(IXGBE_ESDP_SDP0_NATIVE0x00010000 \| IXGBE_ESDP_SDP0_DIR0x00000100);
413	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00020 ), (esdp)));
414	IXGBE_WRITE_FLUSH(hw)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00008 )));
415	}
416
417	/**
418	* ixgbe_identify_phy_x550em - Get PHY type based on device id
419	* @hw: pointer to hardware structure
420	*
421	* Returns error code
422	*/
423	int32_t ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
424	{
425	hw->mac.ops.set_lan_id(hw);
426
427	ixgbe_read_mng_if_sel_x550em(hw);
428
429	switch (hw->device_id) {
430	case IXGBE_DEV_ID_X550EM_A_SFP0x15CE:
431	return ixgbe_identify_module_generic(hw);
432	case IXGBE_DEV_ID_X550EM_X_SFP0x15AC:
433	/* set up for CS4227 usage */
434	ixgbe_setup_mux_ctl(hw);
435	ixgbe_check_cs4227(hw);
436	/* Fallthrough */
437
438	case IXGBE_DEV_ID_X550EM_A_SFP_N0x15C4:
439	return ixgbe_identify_module_generic(hw);
440	break;
441	case IXGBE_DEV_ID_X550EM_X_KX40x15AA:
442	hw->phy.type = ixgbe_phy_x550em_kx4;
443	break;
444	case IXGBE_DEV_ID_X550EM_X_XFI0x15B0:
445	hw->phy.type = ixgbe_phy_x550em_xfi;
446	break;
447	case IXGBE_DEV_ID_X550EM_X_KR0x15AB:
448	case IXGBE_DEV_ID_X550EM_A_KR0x15C2:
449	case IXGBE_DEV_ID_X550EM_A_KR_L0x15C3:
450	hw->phy.type = ixgbe_phy_x550em_kr;
451	break;
452	case IXGBE_DEV_ID_X550EM_A_10G_T0x15C8:
453	case IXGBE_DEV_ID_X550EM_X_10G_T0x15AD:
454	return ixgbe_identify_phy_generic(hw);
455	case IXGBE_DEV_ID_X550EM_X_1G_T0x15AE:
456	hw->phy.type = ixgbe_phy_ext_1g_t;
457	break;
458	case IXGBE_DEV_ID_X550EM_A_1G_T0x15E4:
459	case IXGBE_DEV_ID_X550EM_A_1G_T_L0x15E5:
460	hw->phy.type = ixgbe_phy_fw;
461	if (hw->bus.lan_id)
462	hw->phy.phy_semaphore_mask \|= IXGBE_GSSR_PHY1_SM0x0004;
463	else
464	hw->phy.phy_semaphore_mask \|= IXGBE_GSSR_PHY0_SM0x0002;
465	break;
466	default:
467	break;
468	}
469	return IXGBE_SUCCESS0;
470	}
471
472	/**
473	* ixgbe_fw_phy_activity - Perform an activity on a PHY
474	* @hw: pointer to hardware structure
475	* @activity: activity to perform
476	* @data: Pointer to 4 32-bit words of data
477	*/
478	int32_t ixgbe_fw_phy_activity(struct ixgbe_hw *hw, uint16_t activity,
479	uint32_t (*data)[FW_PHY_ACT_DATA_COUNT4])
480	{
481	union {
482	struct ixgbe_hic_phy_activity_req cmd;
483	struct ixgbe_hic_phy_activity_resp rsp;
484	} hic;
485	uint16_t retries = FW_PHY_ACT_RETRIES50;
486	int32_t rc;
487	uint16_t i;
488
489	do {
490	memset(&hic, 0, sizeof(hic))__builtin_memset((&hic), (0), (sizeof(hic)));
491	hic.cmd.hdr.cmd = FW_PHY_ACT_REQ_CMD5;
492	hic.cmd.hdr.buf_len = FW_PHY_ACT_REQ_LEN(4 + 4 * 4);
493	hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM0xFF;
494	hic.cmd.port_number = hw->bus.lan_id;
495	hic.cmd.activity_id = htole16(activity)((__uint16_t)(activity));
496	for (i = 0; i < FW_PHY_ACT_DATA_COUNT4; ++i)
497	hic.cmd.data[i] = htobe32((data)[i])(__uint32_t)(__builtin_constant_p((data)[i]) ? (__uint32_t)( ((__uint32_t)((data)[i]) & 0xff) << 24 \| ((__uint32_t )((data)[i]) & 0xff00) << 8 \| ((__uint32_t)((data )[i]) & 0xff0000) >> 8 \| ((__uint32_t)((data)[i]) & 0xff000000) >> 24) : __swap32md((*data)[i]));
498
499	rc = ixgbe_host_interface_command(hw, (uint32_t *)&hic.cmd,
500	sizeof(hic.cmd),
501	IXGBE_HI_COMMAND_TIMEOUT500,
502	TRUE1);
503	if (rc != IXGBE_SUCCESS0)
504	return rc;
505	if (hic.rsp.hdr.cmd_or_resp.ret_status ==
506	FW_CEM_RESP_STATUS_SUCCESS0x1) {
507	for (i = 0; i < FW_PHY_ACT_DATA_COUNT4; ++i)
508	(*data)[i] = betoh32(hic.rsp.data[i])(__uint32_t)(__builtin_constant_p(hic.rsp.data[i]) ? (__uint32_t )(((__uint32_t)(hic.rsp.data[i]) & 0xff) << 24 \| (( __uint32_t)(hic.rsp.data[i]) & 0xff00) << 8 \| ((__uint32_t )(hic.rsp.data[i]) & 0xff0000) >> 8 \| ((__uint32_t) (hic.rsp.data[i]) & 0xff000000) >> 24) : __swap32md (hic.rsp.data[i]));
509	return IXGBE_SUCCESS0;
510	}
511	usec_delay(20)(*delay_func)(20);
512	--retries;
513	} while (retries > 0);
514
515	return IXGBE_ERR_HOST_INTERFACE_COMMAND-33;
516	}
517
518	static const struct {
519	uint16_t fw_speed;
520	ixgbe_link_speed phy_speed;
521	} ixgbe_fw_map[] = {
522	{ FW_PHY_ACT_LINK_SPEED_10(1u << 0), IXGBE_LINK_SPEED_10_FULL0x0002 },
523	{ FW_PHY_ACT_LINK_SPEED_100(1u << 1), IXGBE_LINK_SPEED_100_FULL0x0008 },
524	{ FW_PHY_ACT_LINK_SPEED_1G(1u << 2), IXGBE_LINK_SPEED_1GB_FULL0x0020 },
525	{ FW_PHY_ACT_LINK_SPEED_2_5G(1u << 3), IXGBE_LINK_SPEED_2_5GB_FULL0x0400 },
526	{ FW_PHY_ACT_LINK_SPEED_5G(1u << 4), IXGBE_LINK_SPEED_5GB_FULL0x0800 },
527	{ FW_PHY_ACT_LINK_SPEED_10G(1u << 5), IXGBE_LINK_SPEED_10GB_FULL0x0080 },
528	};
529
530	/**
531	* ixgbe_get_phy_id_fw - Get the phy ID via firmware command
532	* @hw: pointer to hardware structure
533	*
534	* Returns error code
535	*/
536	int32_t ixgbe_get_phy_id_fw(struct ixgbe_hw *hw)
537	{
538	uint32_t info[FW_PHY_ACT_DATA_COUNT4] = { 0 };
539	uint16_t phy_speeds;
540	uint16_t phy_id_lo;
541	int32_t rc;
542	uint16_t i;
543
544	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO7, &info);
545	if (rc)
546	return rc;
547
548	hw->phy.speeds_supported = 0;
549	phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK0xFFFu;
550	for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) {
551	if (phy_speeds & ixgbe_fw_map[i].fw_speed)
552	hw->phy.speeds_supported \|= ixgbe_fw_map[i].phy_speed;
553	}
554	if (!hw->phy.autoneg_advertised)
555	hw->phy.autoneg_advertised = hw->phy.speeds_supported;
556
557	hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK0xFFFF0000u;
558	phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK0x0000FFFFu;
559	hw->phy.id \|= phy_id_lo & IXGBE_PHY_REVISION_MASK0xFFFFFFF0;
560	hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK0xFFFFFFF0;
561	if (!hw->phy.id \|\| hw->phy.id == IXGBE_PHY_REVISION_MASK0xFFFFFFF0)
562	return IXGBE_ERR_PHY_ADDR_INVALID-17;
563	return IXGBE_SUCCESS0;
564	}
565
566	/**
567	* ixgbe_identify_phy_fw - Get PHY type based on firmware command
568	* @hw: pointer to hardware structure
569	*
570	* Returns error code
571	*/
572	int32_t ixgbe_identify_phy_fw(struct ixgbe_hw *hw)
573	{
574	if (hw->bus.lan_id)
575	hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM0x0004;
576	else
577	hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM0x0002;
578
579	hw->phy.type = ixgbe_phy_fw;
580	hw->phy.ops.read_reg = NULL((void *)0);
581	hw->phy.ops.write_reg = NULL((void *)0);
582	return ixgbe_get_phy_id_fw(hw);
583	}
584
585	/**
586	* ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY
587	* @hw: pointer to hardware structure
588	*
589	* Returns error code
590	*/
591	int32_t ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw)
592	{
593	uint32_t setup[FW_PHY_ACT_DATA_COUNT4] = { 0 };
594
595	setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF(1u << 0);
596	return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN4, &setup);
597	}
598
599	int32_t ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, uint32_t reg_addr,
600	uint32_t device_type, uint16_t *phy_data)
601	{
602	return IXGBE_NOT_IMPLEMENTED0x7FFFFFFF;
603	}
604
605	int32_t ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, uint32_t reg_addr,
606	uint32_t device_type, uint16_t phy_data)
607	{
608	return IXGBE_NOT_IMPLEMENTED0x7FFFFFFF;
609	}
610
611	/**
612	* ixgbe_init_ops_X550EM - Inits func ptrs and MAC type
613	* @hw: pointer to hardware structure
614	*
615	* Initialize the function pointers and for MAC type X550EM.
616	* Does not touch the hardware.
617	**/
618	int32_t ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
619	{
620	struct ixgbe_mac_info *mac = &hw->mac;
621	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
622	struct ixgbe_phy_info *phy = &hw->phy;
623	int32_t ret_val;
624
625	DEBUGFUNC("ixgbe_init_ops_X550EM");;
626
627	/* Similar to X550 so start there. */
628	ret_val = ixgbe_init_ops_X550(hw);
629
630	/* Since this function eventually calls
631	* ixgbe_init_ops_540 by design, we are setting
632	* the pointers to NULL explicitly here to overwrite
633	* the values being set in the x540 function.
634	*/
635
636	/* IPsec not supported in x550EM */
637	mac->ops.disable_sec_rx_path = NULL((void *)0);
638	mac->ops.enable_sec_rx_path = NULL((void *)0);
639
640	/* AUTOC register is not present in x550EM. */
641	mac->ops.prot_autoc_read = NULL((void *)0);
642	mac->ops.prot_autoc_write = NULL((void *)0);
643
644	/* X550EM bus type is internal*/
645	hw->bus.type = ixgbe_bus_type_internal;
646	mac->ops.get_bus_info = ixgbe_get_bus_info_X550em;
647
648
649	mac->ops.get_media_type = ixgbe_get_media_type_X550em;
650	mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em;
651	mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em;
652	mac->ops.reset_hw = ixgbe_reset_hw_X550em;
653	mac->ops.get_supported_physical_layer =
654	ixgbe_get_supported_physical_layer_X550em;
655
656	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
657	mac->ops.setup_fc = ixgbe_setup_fc_generic;
658	else
659	mac->ops.setup_fc = ixgbe_setup_fc_X550em;
660
661	/* PHY */
662	phy->ops.init = ixgbe_init_phy_ops_X550em;
663	switch (hw->device_id) {
664	case IXGBE_DEV_ID_X550EM_A_1G_T0x15E4:
665	case IXGBE_DEV_ID_X550EM_A_1G_T_L0x15E5:
666	mac->ops.setup_fc = NULL((void *)0);
667	phy->ops.identify = ixgbe_identify_phy_fw;
668	phy->ops.set_phy_power = NULL((void *)0);
669	phy->ops.get_firmware_version = NULL((void *)0);
670	break;
671	case IXGBE_DEV_ID_X550EM_X_1G_T0x15AE:
672	mac->ops.setup_fc = NULL((void *)0);
673	phy->ops.identify = ixgbe_identify_phy_x550em;
674	phy->ops.set_phy_power = NULL((void *)0);
675	break;
676	default:
677	phy->ops.identify = ixgbe_identify_phy_x550em;
678	}
679
680	if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
681	phy->ops.set_phy_power = NULL((void *)0);
682
683
684	/* EEPROM */
685	eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
686	eeprom->ops.read = ixgbe_read_ee_hostif_X550;
687	eeprom->ops.write = ixgbe_write_ee_hostif_X550;
688	eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
689	eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
690	eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
691
692	return ret_val;
693	}
694
695	/**
696	* ixgbe_setup_fw_link - Setup firmware-controlled PHYs
697	* @hw: pointer to hardware structure
698	*/
699	int32_t ixgbe_setup_fw_link(struct ixgbe_hw *hw)
700	{
701	uint32_t setup[FW_PHY_ACT_DATA_COUNT4] = { 0 };
702	int32_t rc;
703	uint16_t i;
704
705	if (hw->phy.reset_disable \|\| ixgbe_check_reset_blocked(hw))
706	return 0;
707
708	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
709	ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
710	"ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
711	return IXGBE_ERR_INVALID_LINK_SETTINGS-13;
712	}
713
714	switch (hw->fc.requested_mode) {
715	case ixgbe_fc_full:
716	setup[0] \|= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX3u <<
717	FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT16;
718	break;
719	case ixgbe_fc_rx_pause:
720	setup[0] \|= FW_PHY_ACT_SETUP_LINK_PAUSE_RX2u <<
721	FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT16;
722	break;
723	case ixgbe_fc_tx_pause:
724	setup[0] \|= FW_PHY_ACT_SETUP_LINK_PAUSE_TX1u <<
725	FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT16;
726	break;
727	default:
728	break;
729	}
730
731	for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) {
732	if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed)
733	setup[0] \|= ixgbe_fw_map[i].fw_speed;
734	}
735	setup[0] \|= FW_PHY_ACT_SETUP_LINK_HP(1u << 19) \| FW_PHY_ACT_SETUP_LINK_AN(1u << 22);
736
737	if (hw->phy.eee_speeds_advertised)
738	setup[0] \|= FW_PHY_ACT_SETUP_LINK_EEE(1u << 20);
739
740	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK2, &setup);
741	if (rc)
742	return rc;
743	if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN(1u << 0))
744	return IXGBE_ERR_OVERTEMP-26;
745	return IXGBE_SUCCESS0;
746	}
747
748	/**
749	* ixgbe_fc_autoneg_fw _ Set up flow control for FW-controlled PHYs
750	* @hw: pointer to hardware structure
751	*
752	* Called at init time to set up flow control.
753	*/
754	int32_t ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw)
755	{
756	if (hw->fc.requested_mode == ixgbe_fc_default)
757	hw->fc.requested_mode = ixgbe_fc_full;
758
759	return ixgbe_setup_fw_link(hw);
760	}
761
762	/**
763	* ixgbe_setup_eee_fw - Enable/disable EEE support
764	* @hw: pointer to the HW structure
765	* @enable_eee: boolean flag to enable EEE
766	*
767	* Enable/disable EEE based on enable_eee flag.
768	* This function controls EEE for firmware-based PHY implementations.
769	*/
770	int32_t ixgbe_setup_eee_fw(struct ixgbe_hw *hw, bool_Bool enable_eee)
771	{
772	if (!!hw->phy.eee_speeds_advertised == enable_eee)
773	return IXGBE_SUCCESS0;
774	if (enable_eee)
775	hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported;
776	else
777	hw->phy.eee_speeds_advertised = 0;
778	return hw->phy.ops.setup_link(hw);
779	}
780
781	/**
782	* ixgbe_init_ops_X550EM_a - Inits func ptrs and MAC type
783	* @hw: pointer to hardware structure
784	*
785	* Initialize the function pointers and for MAC type X550EM_a.
786	* Does not touch the hardware.
787	**/
788	int32_t ixgbe_init_ops_X550EM_a(struct ixgbe_hw *hw)
789	{
790	struct ixgbe_mac_info *mac = &hw->mac;
791	int32_t ret_val;
792
793	DEBUGFUNC("ixgbe_init_ops_X550EM_a");;
794
795	/* Start with generic X550EM init */
796	ret_val = ixgbe_init_ops_X550EM(hw);
797
798	if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII0x15C6 \|\|
799	hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L0x15C7) {
800	mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550;
801	mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550;
802	} else {
803	mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a;
804	mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a;
805	}
806	mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550a;
807	mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550a;
808
809	switch (mac->ops.get_media_type(hw)) {
810	case ixgbe_media_type_fiber:
811	mac->ops.setup_fc = NULL((void *)0);
812	mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a;
813	break;
814	case ixgbe_media_type_backplane:
815	mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a;
816	mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a;
817	break;
818	default:
819	break;
820	}
821
822	switch (hw->device_id) {
823	case IXGBE_DEV_ID_X550EM_A_1G_T0x15E4:
824	case IXGBE_DEV_ID_X550EM_A_1G_T_L0x15E5:
825	mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a;
826	mac->ops.setup_fc = ixgbe_fc_autoneg_fw;
827	mac->ops.setup_eee = ixgbe_setup_eee_fw;
828	hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL0x0008 \|
829	IXGBE_LINK_SPEED_1GB_FULL0x0020;
830	hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported;
831	break;
832	default:
833	break;
834	}
835
836	return ret_val;
837	}
838
839	/**
840	* ixgbe_init_ops_X550EM_x - Inits func ptrs and MAC type
841	* @hw: pointer to hardware structure
842	*
843	* Initialize the function pointers and for MAC type X550EM_x.
844	* Does not touch the hardware.
845	**/
846	int32_t ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw)
847	{
848	struct ixgbe_mac_info *mac = &hw->mac;
849	struct ixgbe_link_info *link = &hw->link;
850	int32_t ret_val;
851
852	DEBUGFUNC("ixgbe_init_ops_X550EM_x");;
853
854	/* Start with generic X550EM init */
855	ret_val = ixgbe_init_ops_X550EM(hw);
856
857	mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550;
858	mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550;
859	mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
860	mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
861	link->ops.read_link = ixgbe_read_i2c_combined_generic;
862	link->ops.read_link_unlocked = ixgbe_read_i2c_combined_generic_unlocked;
863	link->ops.write_link = ixgbe_write_i2c_combined_generic;
864	link->ops.write_link_unlocked =
865	ixgbe_write_i2c_combined_generic_unlocked;
866	link->addr = IXGBE_CS42270xBE;
867
868	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T0x15AE) {
869	mac->ops.setup_fc = NULL((void *)0);
870	mac->ops.setup_eee = NULL((void *)0);
871	}
872
873	return ret_val;
874	}
875
876	/**
877	* ixgbe_dmac_config_X550
878	* @hw: pointer to hardware structure
879	*
880	* Configure DMA coalescing. If enabling dmac, dmac is activated.
881	* When disabling dmac, dmac enable dmac bit is cleared.
882	**/
883	int32_t ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
884	{
885	uint32_t reg;
886
887	DEBUGFUNC("ixgbe_dmac_config_X550");;
888
889	/* Disable DMA coalescing before configuring */
890	reg = IXGBE_READ_REG(hw, IXGBE_DMACR)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 )));
891	reg &= ~IXGBE_DMACR_DMAC_EN0x80000000;
892	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 ), (reg)));
893
894	/* Disable DMA Coalescing if the watchdog timer is 0 */
895	if (!hw->mac.dmac_config.watchdog_timer)
896	goto out;
897
898	ixgbe_dmac_config_tcs_X550(hw);
899
900	/* Configure DMA Coalescing Control Register */
901	reg = IXGBE_READ_REG(hw, IXGBE_DMACR)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 )));
902
903	/* Set the watchdog timer in units of 40.96 usec */
904	reg &= ~IXGBE_DMACR_DMACWT_MASK0x0000FFFF;
905	reg \|= (hw->mac.dmac_config.watchdog_timer * 100) / 4096;
906
907	reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK0x00FF0000;
908	reg \|= IXGBE_DMACR_EN_MNG_IND0x10000000;
909
910	/* Enable DMA coalescing after configuration */
911	reg \|= IXGBE_DMACR_DMAC_EN0x80000000;
912	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 ), (reg)));
913
914	out:
915	return IXGBE_SUCCESS0;
916	}
917
918	/**
919	* ixgbe_dmac_config_tcs_X550
920	* @hw: pointer to hardware structure
921	*
922	* Configure DMA coalescing threshold per TC. The dmac enable bit must
923	* be cleared before configuring.
924	**/
925	int32_t ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
926	{
927	uint32_t tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb;
928
929	DEBUGFUNC("ixgbe_dmac_config_tcs_X550");;
930
931	/* Configure DMA coalescing enabled */
932	switch (hw->mac.dmac_config.link_speed) {
933	case IXGBE_LINK_SPEED_10_FULL0x0002:
934	case IXGBE_LINK_SPEED_100_FULL0x0008:
935	pb_headroom = IXGBE_DMACRXT_100M0x01;
936	break;
937	case IXGBE_LINK_SPEED_1GB_FULL0x0020:
938	pb_headroom = IXGBE_DMACRXT_1G0x09;
939	break;
940	default:
941	pb_headroom = IXGBE_DMACRXT_10G0x55;
942	break;
943	}
944
945	maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x04268 ))) >>
946	IXGBE_MHADD_MFS_SHIFT16) / 1024);
947
948	/* Set the per Rx packet buffer receive threshold */
949	for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS8; tc++) {
950	reg = IXGBE_READ_REG(hw, IXGBE_DMCTH(tc))((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), ((0x03300 + ((tc) * 4)))));
951	reg &= ~IXGBE_DMCTH_DMACRXT_MASK0x000001FF;
952
953	if (tc < hw->mac.dmac_config.num_tcs) {
954	/* Get Rx PB size */
955	rx_pb_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc))((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), ((0x03C00 + ((tc) * 4)))));
956	rx_pb_size = (rx_pb_size & IXGBE_RXPBSIZE_MASK0x000FFC00) >>
957	IXGBE_RXPBSIZE_SHIFT10;
958
959	/* Calculate receive buffer threshold in kilobytes */
960	if (rx_pb_size > pb_headroom)
961	rx_pb_size = rx_pb_size - pb_headroom;
962	else
963	rx_pb_size = 0;
964
965	/* Minimum of MFS shall be set for DMCTH */
966	reg \|= (rx_pb_size > maxframe_size_kb) ?
967	rx_pb_size : maxframe_size_kb;
968	}
969	IXGBE_WRITE_REG(hw, IXGBE_DMCTH(tc), reg)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), ((0x03300 + ((tc) * 4))), (reg)));
970	}
971	return IXGBE_SUCCESS0;
972	}
973
974	/**
975	* ixgbe_dmac_update_tcs_X550
976	* @hw: pointer to hardware structure
977	*
978	* Disables dmac, updates per TC settings, and then enables dmac.
979	**/
980	int32_t ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
981	{
982	uint32_t reg;
983
984	DEBUGFUNC("ixgbe_dmac_update_tcs_X550");;
985
986	/* Disable DMA coalescing before configuring */
987	reg = IXGBE_READ_REG(hw, IXGBE_DMACR)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 )));
988	reg &= ~IXGBE_DMACR_DMAC_EN0x80000000;
989	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 ), (reg)));
990
991	ixgbe_dmac_config_tcs_X550(hw);
992
993	/* Enable DMA coalescing after configuration */
994	reg = IXGBE_READ_REG(hw, IXGBE_DMACR)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 )));
995	reg \|= IXGBE_DMACR_DMAC_EN0x80000000;
996	IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x02400 ), (reg)));
997
998	return IXGBE_SUCCESS0;
999	}
1000
1001	/**
1002	* ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
1003	* @hw: pointer to hardware structure
1004	*
1005	* Initializes the EEPROM parameters ixgbe_eeprom_info within the
1006	* ixgbe_hw struct in order to set up EEPROM access.
1007	**/
1008	int32_t ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
1009	{
1010	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
1011	uint32_t eec;
1012	uint16_t eeprom_size;
1013
1014	DEBUGFUNC("ixgbe_init_eeprom_params_X550");;
1015
1016	if (eeprom->type == ixgbe_eeprom_uninitialized) {
1017	eeprom->semaphore_delay = 10;
1018	eeprom->type = ixgbe_flash;
1019
1020	eec = IXGBE_READ_REG(hw, IXGBE_EEC)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x10010 )));
1021	eeprom_size = (uint16_t)((eec & IXGBE_EEC_SIZE0x00007800) >>
1022	IXGBE_EEC_SIZE_SHIFT11);
1023	eeprom->word_size = 1 << (eeprom_size +
1024	IXGBE_EEPROM_WORD_SIZE_SHIFT6);
1025
1026	DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
1027	eeprom->type, eeprom->word_size);
1028	}
1029
1030	return IXGBE_SUCCESS0;
1031	}
1032
1033	/**
1034	* ixgbe_set_source_address_pruning_X550 - Enable/Disable source address pruning
1035	* @hw: pointer to hardware structure
1036	* @enable: enable or disable source address pruning
1037	* @pool: Rx pool to set source address pruning for
1038	**/
1039	void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool_Bool enable,
1040	unsigned int pool)
1041	{
1042	uint64_t pfflp;
1043
1044	/* max rx pool is 63 */
1045	if (pool > 63)
1046	return;
1047
1048	pfflp = (uint64_t)IXGBE_READ_REG(hw, IXGBE_PFFLPL)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x050B0 )));
1049	pfflp \|= (uint64_t)IXGBE_READ_REG(hw, IXGBE_PFFLPH)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x050B4 ))) << 32;
1050
1051	if (enable)
1052	pfflp \|= (1ULL << pool);
1053	else
1054	pfflp &= ~(1ULL << pool);
1055
1056	IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (uint32_t)pfflp)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x050B0 ), ((uint32_t)pfflp)));
1057	IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (uint32_t)(pfflp >> 32))((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x050B4 ), ((uint32_t)(pfflp >> 32))));
1058	}
1059
1060	/**
1061	* ixgbe_iosf_wait - Wait for IOSF command completion
1062	* @hw: pointer to hardware structure
1063	* @ctrl: pointer to location to receive final IOSF control value
1064	*
1065	* Returns failing status on timeout
1066	*
1067	* Note: ctrl can be NULL if the IOSF control register value is not needed
1068	**/
1069	int32_t ixgbe_iosf_wait(struct ixgbe_hw hw, uint32_t ctrl)
1070	{
1071	uint32_t i, command = 0;
1072
1073	/* Check every 10 usec to see if the address cycle completed.
1074	* The SB IOSF BUSY bit will clear when the operation is
1075	* complete
1076	*/
1077	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT100; i++) {
1078	command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00011144 )));
1079	if ((command & IXGBE_SB_IOSF_CTRL_BUSY(1 << 31)) == 0)
1080	break;
1081	usec_delay(10)(*delay_func)(10);
1082	}
1083	if (ctrl)
1084	*ctrl = command;
1085	if (i == IXGBE_MDIO_COMMAND_TIMEOUT100) {
1086	ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n");
1087	return IXGBE_ERR_PHY-3;
1088	}
1089
1090	return IXGBE_SUCCESS0;
1091	}
1092
1093	/**
1094	* ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register
1095	* of the IOSF device
1096	* @hw: pointer to hardware structure
1097	* @reg_addr: 32 bit PHY register to write
1098	* @device_type: 3 bit device type
1099	* @data: Data to write to the register
1100	**/
1101	int32_t ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, uint32_t reg_addr,
1102	uint32_t device_type, uint32_t data)
1103	{
1104	uint32_t gssr = IXGBE_GSSR_PHY1_SM0x0004 \| IXGBE_GSSR_PHY0_SM0x0002;
1105	uint32_t command, error __unused__attribute__((__unused__));
1106	int32_t ret;
1107
1108	ret = hw->mac.ops.acquire_swfw_sync(hw, gssr);
1109	if (ret != IXGBE_SUCCESS0)
1110	return ret;
1111
1112	ret = ixgbe_iosf_wait(hw, NULL((void *)0));
1113	if (ret != IXGBE_SUCCESS0)
1114	goto out;
1115
1116	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT0) \|
1117	(device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT28));
1118
1119	/* Write IOSF control register */
1120	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00011144 ), (command)));
1121
1122	/* Write IOSF data register */
1123	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00011148 ), (data)));
1124
1125	ret = ixgbe_iosf_wait(hw, &command);
1126
1127	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK(0x3 << 18)) != 0) {
1128	error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK(0xFF << 20)) >>
1129	IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT20;
1130	ERROR_REPORT2(IXGBE_ERROR_POLLING,
1131	"Failed to write, error %x\n", error);
1132	ret = IXGBE_ERR_PHY-3;
1133	}
1134
1135	out:
1136	hw->mac.ops.release_swfw_sync(hw, gssr);
1137	return ret;
1138	}
1139
1140	/**
1141	* ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device
1142	* @hw: pointer to hardware structure
1143	* @reg_addr: 32 bit PHY register to write
1144	* @device_type: 3 bit device type
1145	* @data: Pointer to read data from the register
1146	**/
1147	int32_t ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, uint32_t reg_addr,
1148	uint32_t device_type, uint32_t *data)
1149	{
1150	uint32_t gssr = IXGBE_GSSR_PHY1_SM0x0004 \| IXGBE_GSSR_PHY0_SM0x0002;
1151	uint32_t command, error __unused__attribute__((__unused__));
1152	int32_t ret;
1153
1154	ret = hw->mac.ops.acquire_swfw_sync(hw, gssr);
1155	if (ret != IXGBE_SUCCESS0)
1156	return ret;
1157
1158	ret = ixgbe_iosf_wait(hw, NULL((void *)0));
1159	if (ret != IXGBE_SUCCESS0)
1160	goto out;
1161
1162	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT0) \|
1163	(device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT28));
1164
1165	/* Write IOSF control register */
1166	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00011144 ), (command)));
1167
1168	ret = ixgbe_iosf_wait(hw, &command);
1169
1170	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK(0x3 << 18)) != 0) {
1171	error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK(0xFF << 20)) >>
1172	IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT20;
1173	ERROR_REPORT2(IXGBE_ERROR_POLLING,
1174	"Failed to read, error %x\n", error);
1175	ret = IXGBE_ERR_PHY-3;
1176	}
1177
1178	if (ret == IXGBE_SUCCESS0)
1179	data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep *)(hw)->back)->os_memh), (0x00011148 )));
1180
1181	out:
1182	hw->mac.ops.release_swfw_sync(hw, gssr);
1183	return ret;
1184	}
1185
1186	/**
1187	* ixgbe_get_phy_token - Get the token for shared phy access
1188	* @hw: Pointer to hardware structure
1189	*/
1190
1191	int32_t ixgbe_get_phy_token(struct ixgbe_hw *hw)
1192	{
1193	struct ixgbe_hic_phy_token_req token_cmd;
1194	int32_t status;
1195
1196	token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD0xA;
1197	token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN2;
1198	token_cmd.hdr.cmd_or_resp.cmd_resv = 0;
1199	token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM0xFF;
1200	token_cmd.port_number = hw->bus.lan_id;
1201	token_cmd.command_type = FW_PHY_TOKEN_REQ0;
1202	token_cmd.pad = 0;
1203	status = ixgbe_host_interface_command(hw, (uint32_t *)&token_cmd,
1204	sizeof(token_cmd),
1205	IXGBE_HI_COMMAND_TIMEOUT500,
1206	TRUE1);
1207	if (status) {
1208	DEBUGOUT1("Issuing host interface command failed with Status = %d\n",
1209	status);
1210	return status;
1211	}
1212	if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK1)
1213	return IXGBE_SUCCESS0;
1214	if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY0x80) {
1215	DEBUGOUT1("Host interface command returned 0x%08x , returning IXGBE_ERR_FW_RESP_INVALID\n",
1216	token_cmd.hdr.cmd_or_resp.ret_status);
1217	return IXGBE_ERR_FW_RESP_INVALID-39;
1218	}
1219
1220	DEBUGOUT("Returning IXGBE_ERR_TOKEN_RETRY\n");
1221	return IXGBE_ERR_TOKEN_RETRY-40;
1222	}
1223
1224	/**
1225	* ixgbe_put_phy_token - Put the token for shared phy access
1226	* @hw: Pointer to hardware structure
1227	*/
1228
1229	int32_t ixgbe_put_phy_token(struct ixgbe_hw *hw)
1230	{
1231	struct ixgbe_hic_phy_token_req token_cmd;
1232	int32_t status;
1233
1234	token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD0xA;
1235	token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN2;
1236	token_cmd.hdr.cmd_or_resp.cmd_resv = 0;
1237	token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM0xFF;
1238	token_cmd.port_number = hw->bus.lan_id;
1239	token_cmd.command_type = FW_PHY_TOKEN_REL1;
1240	token_cmd.pad = 0;
1241	status = ixgbe_host_interface_command(hw, (uint32_t *)&token_cmd,
1242	sizeof(token_cmd),
1243	IXGBE_HI_COMMAND_TIMEOUT500,
1244	TRUE1);
1245	if (status)
1246	return status;
1247	if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK1)
1248	return IXGBE_SUCCESS0;
1249
1250	DEBUGOUT("Put PHY Token host interface command failed");
1251	return IXGBE_ERR_FW_RESP_INVALID-39;
1252	}
1253
1254	/**
1255	* ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register
1256	* of the IOSF device
1257	* @hw: pointer to hardware structure
1258	* @reg_addr: 32 bit PHY register to write
1259	* @device_type: 3 bit device type
1260	* @data: Data to write to the register
1261	**/
1262	int32_t ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
1263	uint32_t device_type, uint32_t data)
1264	{
1265	struct ixgbe_hic_internal_phy_req write_cmd;
1266	int32_t status;
1267
1268	memset(&write_cmd, 0, sizeof(write_cmd))__builtin_memset((&write_cmd), (0), (sizeof(write_cmd)));
1269	write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD0xB;
1270	write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN10;
1271	write_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM0xFF;
1272	write_cmd.port_number = hw->bus.lan_id;
1273	write_cmd.command_type = FW_INT_PHY_REQ_WRITE1;
1274	write_cmd.address = htobe16(reg_addr)(__uint16_t)(__builtin_constant_p(reg_addr) ? (__uint16_t)((( __uint16_t)(reg_addr) & 0xffU) << 8 \| ((__uint16_t) (reg_addr) & 0xff00U) >> 8) : __swap16md(reg_addr));
1275	write_cmd.write_data = htobe32(data)(__uint32_t)(__builtin_constant_p(data) ? (__uint32_t)(((__uint32_t )(data) & 0xff) << 24 \| ((__uint32_t)(data) & 0xff00 ) << 8 \| ((__uint32_t)(data) & 0xff0000) >> 8 \| ((__uint32_t)(data) & 0xff000000) >> 24) : __swap32md (data));
1276
1277	status = ixgbe_host_interface_command(hw, (uint32_t *)&write_cmd,
1278	sizeof(write_cmd),
1279	IXGBE_HI_COMMAND_TIMEOUT500, FALSE0);
1280
1281	return status;
1282	}
1283
1284	/**
1285	* ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device
1286	* @hw: pointer to hardware structure
1287	* @reg_addr: 32 bit PHY register to write
1288	* @device_type: 3 bit device type
1289	* @data: Pointer to read data from the register
1290	**/
1291	int32_t ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
1292	uint32_t device_type, uint32_t *data)
1293	{
1294	union {
1295	struct ixgbe_hic_internal_phy_req cmd;
1296	struct ixgbe_hic_internal_phy_resp rsp;
1297	} hic;
1298	int32_t status;
1299
1300	memset(&hic, 0, sizeof(hic))__builtin_memset((&hic), (0), (sizeof(hic)));
1301	hic.cmd.hdr.cmd = FW_INT_PHY_REQ_CMD0xB;
1302	hic.cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN10;
1303	hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM0xFF;
1304	hic.cmd.port_number = hw->bus.lan_id;
1305	hic.cmd.command_type = FW_INT_PHY_REQ_READ0;
1306	hic.cmd.address = htobe16(reg_addr)(__uint16_t)(__builtin_constant_p(reg_addr) ? (__uint16_t)((( __uint16_t)(reg_addr) & 0xffU) << 8 \| ((__uint16_t) (reg_addr) & 0xff00U) >> 8) : __swap16md(reg_addr));
1307
1308	status = ixgbe_host_interface_command(hw, (uint32_t *)&hic.cmd,
1309	sizeof(hic.cmd),
1310	IXGBE_HI_COMMAND_TIMEOUT500, TRUE1);
1311
1312	/* Extract the register value from the response. */
1313	*data = betoh32(hic.rsp.read_data)(__uint32_t)(__builtin_constant_p(hic.rsp.read_data) ? (__uint32_t )(((__uint32_t)(hic.rsp.read_data) & 0xff) << 24 \| ( (__uint32_t)(hic.rsp.read_data) & 0xff00) << 8 \| (( __uint32_t)(hic.rsp.read_data) & 0xff0000) >> 8 \| ( (__uint32_t)(hic.rsp.read_data) & 0xff000000) >> 24 ) : __swap32md(hic.rsp.read_data));
1314
1315	return status;
1316	}
1317
1318	/**
1319	* ixgbe_get_media_type_X550em - Get media type
1320	* @hw: pointer to hardware structure
1321	*
1322	* Returns the media type (fiber, copper, backplane)
1323	*/
1324	enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
1325	{
1326	enum ixgbe_media_type media_type;
1327
1328	DEBUGFUNC("ixgbe_get_media_type_X550em");;
1329
1330	/* Detect if there is a copper PHY attached. */
1331	switch (hw->device_id) {
1332	case IXGBE_DEV_ID_X550EM_X_KR0x15AB:
1333	case IXGBE_DEV_ID_X550EM_X_KX40x15AA:
1334	case IXGBE_DEV_ID_X550EM_X_XFI0x15B0:
1335	case IXGBE_DEV_ID_X550EM_A_KR0x15C2:
1336	case IXGBE_DEV_ID_X550EM_A_KR_L0x15C3:
1337	media_type = ixgbe_media_type_backplane;
1338	break;
1339	case IXGBE_DEV_ID_X550EM_X_SFP0x15AC:
1340	case IXGBE_DEV_ID_X550EM_A_SFP0x15CE:
1341	case IXGBE_DEV_ID_X550EM_A_SFP_N0x15C4:
1342	case IXGBE_DEV_ID_X550EM_A_QSFP0x15CA:
1343	case IXGBE_DEV_ID_X550EM_A_QSFP_N0x15CC:
1344	media_type = ixgbe_media_type_fiber;
1345	break;
1346	case IXGBE_DEV_ID_X550EM_X_1G_T0x15AE:
1347	case IXGBE_DEV_ID_X550EM_X_10G_T0x15AD:
1348	case IXGBE_DEV_ID_X550EM_A_10G_T0x15C8:
1349	media_type = ixgbe_media_type_copper;
1350	break;
1351	case IXGBE_DEV_ID_X550EM_A_SGMII0x15C6:
1352	case IXGBE_DEV_ID_X550EM_A_SGMII_L0x15C7:
1353	media_type = ixgbe_media_type_backplane;
1354	hw->phy.type = ixgbe_phy_sgmii;
1355	break;
1356	case IXGBE_DEV_ID_X550EM_A_1G_T0x15E4:
1357	case IXGBE_DEV_ID_X550EM_A_1G_T_L0x15E5:
1358	media_type = ixgbe_media_type_copper;
1359	break;
1360	default:
1361	media_type = ixgbe_media_type_unknown;
1362	break;
1363	}
1364	return media_type;
1365	}
1366
1367	/**
1368	* ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
1369	* @hw: pointer to hardware structure
1370	* @linear: TRUE if SFP module is linear
1371	*/
1372	int32_t ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw hw, bool_Bool linear)
1373	{
1374	DEBUGFUNC("ixgbe_supported_sfp_modules_X550em");;
1375
1376	switch (hw->phy.sfp_type) {
1377	case ixgbe_sfp_type_not_present:
1378	return IXGBE_ERR_SFP_NOT_PRESENT-20;
1379	case ixgbe_sfp_type_da_cu_core0:
1380	case ixgbe_sfp_type_da_cu_core1:
1381	*linear = TRUE1;
1382	break;
1383	case ixgbe_sfp_type_srlr_core0:
1384	case ixgbe_sfp_type_srlr_core1:
1385	case ixgbe_sfp_type_da_act_lmt_core0:
1386	case ixgbe_sfp_type_da_act_lmt_core1:
1387	case ixgbe_sfp_type_1g_sx_core0:
1388	case ixgbe_sfp_type_1g_sx_core1:
1389	case ixgbe_sfp_type_1g_lx_core0:
1390	case ixgbe_sfp_type_1g_lx_core1:
1391	*linear = FALSE0;
1392	break;
1393	case ixgbe_sfp_type_unknown:
1394	case ixgbe_sfp_type_1g_cu_core0:
1395	case ixgbe_sfp_type_1g_cu_core1:
1396	default:
1397	return IXGBE_ERR_SFP_NOT_SUPPORTED-19;
1398	}
1399
1400	return IXGBE_SUCCESS0;
1401	}
1402
1403	/**
1404	* ixgbe_identify_sfp_module_X550em - Identifies SFP modules
1405	* @hw: pointer to hardware structure
1406	*
1407	* Searches for and identifies the SFP module and assigns appropriate PHY type.
1408	**/
1409	int32_t ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
1410	{
1411	int32_t status;
1412	bool_Bool linear;
1413
1414	DEBUGFUNC("ixgbe_identify_sfp_module_X550em");;
1415
1416	status = ixgbe_identify_module_generic(hw);
1417
1418	if (status != IXGBE_SUCCESS0)
1419	return status;
1420
1421	/* Check if SFP module is supported */
1422	status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
1423
1424	return status;
1425	}
1426
1427	/**
1428	* ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
1429	* @hw: pointer to hardware structure
1430	*/
1431	int32_t ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
1432	{
1433	int32_t status;
1434	bool_Bool linear;
1435
1436	DEBUGFUNC("ixgbe_setup_sfp_modules_X550em");;
1437
1438	/* Check if SFP module is supported */
1439	status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
1440
1441	if (status != IXGBE_SUCCESS0)
1442	return status;
1443
1444	ixgbe_init_mac_link_ops_X550em(hw);
1445	hw->phy.ops.reset = NULL((void *)0);
1446
1447	return IXGBE_SUCCESS0;
1448	}
1449
1450	/**
1451	* ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the
1452	* internal PHY
1453	* @hw: pointer to hardware structure
1454	**/
1455	int32_t ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw)
1456	{
1457	int32_t status;
1458	uint32_t link_ctrl;
1459
1460	/* Restart auto-negotiation. */
1461	status = hw->mac.ops.read_iosf_sb_reg(hw,
1462	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1463	IXGBE_SB_IOSF_TARGET_KR_PHY0, &link_ctrl);
1464
1465	if (status) {
1466	DEBUGOUT("Auto-negotiation did not complete\n");
1467	return status;
1468	}
1469
1470	link_ctrl \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART(1U << 31);
1471	status = hw->mac.ops.write_iosf_sb_reg(hw,
1472	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1473	IXGBE_SB_IOSF_TARGET_KR_PHY0, link_ctrl);
1474
1475	if (hw->mac.type == ixgbe_mac_X550EM_a) {
1476	uint32_t flx_mask_st20;
1477
1478	/* Indicate to FW that AN restart has been asserted */
1479	status = hw->mac.ops.read_iosf_sb_reg(hw,
1480	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
1481	IXGBE_SB_IOSF_TARGET_KR_PHY0, &flx_mask_st20);
1482
1483	if (status) {
1484	DEBUGOUT("Auto-negotiation did not complete\n");
1485	return status;
1486	}
1487
1488	flx_mask_st20 \|= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART(1u << 31);
1489	status = hw->mac.ops.write_iosf_sb_reg(hw,
1490	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
1491	IXGBE_SB_IOSF_TARGET_KR_PHY0, flx_mask_st20);
1492	}
1493
1494	return status;
1495	}
1496
1497	/**
1498	* ixgbe_setup_sgmii - Set up link for sgmii
1499	* @hw: pointer to hardware structure
1500	* @speed: new link speed
1501	* @autoneg_wait: TRUE when waiting for completion is needed
1502	*/
1503	int32_t ixgbe_setup_sgmii(struct ixgbe_hw *hw, ixgbe_link_speed speed,
1504	bool_Bool autoneg_wait)
1505	{
1506	struct ixgbe_mac_info *mac = &hw->mac;
1507	uint32_t lval, sval, flx_val;
1508	int32_t rc;
1509
1510	rc = mac->ops.read_iosf_sb_reg(hw,
1511	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1512	IXGBE_SB_IOSF_TARGET_KR_PHY0, &lval);
1513	if (rc)
1514	return rc;
1515
1516	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE(1 << 29);
1517	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK(0x7 << 8);
1518	lval \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN(1 << 12);
1519	lval \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN(1 << 13);
1520	lval \|= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G(2 << 8);
1521	rc = mac->ops.write_iosf_sb_reg(hw,
1522	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1523	IXGBE_SB_IOSF_TARGET_KR_PHY0, lval);
1524	if (rc)
1525	return rc;
1526
1527	rc = mac->ops.read_iosf_sb_reg(hw,
1528	IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x82A0 : 0x42A0),
1529	IXGBE_SB_IOSF_TARGET_KR_PHY0, &sval);
1530	if (rc)
1531	return rc;
1532
1533	sval \|= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D(1 << 19);
1534	sval \|= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D(1 << 12);
1535	rc = mac->ops.write_iosf_sb_reg(hw,
1536	IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x82A0 : 0x42A0),
1537	IXGBE_SB_IOSF_TARGET_KR_PHY0, sval);
1538	if (rc)
1539	return rc;
1540
1541	rc = mac->ops.read_iosf_sb_reg(hw,
1542	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
1543	IXGBE_SB_IOSF_TARGET_KR_PHY0, &flx_val);
1544	if (rc)
1545	return rc;
1546
1547	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK(0x7 << 28);
1548	flx_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G(0x2 << 28);
1549	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN(1u << 27);
1550	flx_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN(1u << 25);
1551	flx_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN(1u << 26);
1552
1553	rc = mac->ops.write_iosf_sb_reg(hw,
1554	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
1555	IXGBE_SB_IOSF_TARGET_KR_PHY0, flx_val);
1556	if (rc)
1557	return rc;
1558
1559	rc = ixgbe_restart_an_internal_phy_x550em(hw);
1560	if (rc)
1561	return rc;
1562
1563	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
1564	}
1565
1566	/**
1567	* ixgbe_setup_sgmii_fw - Set up link for internal PHY SGMII auto-negotiation
1568	* @hw: pointer to hardware structure
1569	* @speed: new link speed
1570	* @autoneg_wait: TRUE when waiting for completion is needed
1571	*/
1572	int32_t ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
1573	bool_Bool autoneg_wait)
1574	{
1575	struct ixgbe_mac_info *mac = &hw->mac;
1576	uint32_t lval, sval, flx_val;
1577	int32_t rc;
1578
1579	rc = mac->ops.read_iosf_sb_reg(hw,
1580	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1581	IXGBE_SB_IOSF_TARGET_KR_PHY0, &lval);
1582	if (rc)
1583	return rc;
1584
1585	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE(1 << 29);
1586	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK(0x7 << 8);
1587	lval \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN(1 << 12);
1588	lval \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN(1 << 13);
1589	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G(2 << 8);
1590	rc = mac->ops.write_iosf_sb_reg(hw,
1591	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1592	IXGBE_SB_IOSF_TARGET_KR_PHY0, lval);
1593	if (rc)
1594	return rc;
1595
1596	rc = mac->ops.read_iosf_sb_reg(hw,
1597	IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x82A0 : 0x42A0),
1598	IXGBE_SB_IOSF_TARGET_KR_PHY0, &sval);
1599	if (rc)
1600	return rc;
1601
1602	sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D(1 << 19);
1603	sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D(1 << 12);
1604	rc = mac->ops.write_iosf_sb_reg(hw,
1605	IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x82A0 : 0x42A0),
1606	IXGBE_SB_IOSF_TARGET_KR_PHY0, sval);
1607	if (rc)
1608	return rc;
1609
1610	rc = mac->ops.write_iosf_sb_reg(hw,
1611	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1612	IXGBE_SB_IOSF_TARGET_KR_PHY0, lval);
1613	if (rc)
1614	return rc;
1615
1616	rc = mac->ops.read_iosf_sb_reg(hw,
1617	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
1618	IXGBE_SB_IOSF_TARGET_KR_PHY0, &flx_val);
1619	if (rc)
1620	return rc;
1621
1622	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK(0x7 << 28);
1623	flx_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN(0x4 << 28);
1624	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN(1u << 27);
1625	flx_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN(1u << 25);
1626	flx_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN(1u << 26);
1627
1628	rc = mac->ops.write_iosf_sb_reg(hw,
1629	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
1630	IXGBE_SB_IOSF_TARGET_KR_PHY0, flx_val);
1631	if (rc)
1632	return rc;
1633
1634	rc = ixgbe_restart_an_internal_phy_x550em(hw);
1635
1636	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
1637	}
1638
1639	/**
1640	* ixgbe_init_mac_link_ops_X550em - init mac link function pointers
1641	* @hw: pointer to hardware structure
1642	*/
1643	void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
1644	{
1645	struct ixgbe_mac_info *mac = &hw->mac;
1646
1647	DEBUGFUNC("ixgbe_init_mac_link_ops_X550em");;
1648
1649	switch (hw->mac.ops.get_media_type(hw)) {
1650	case ixgbe_media_type_fiber:
1651	/* CS4227 does not support autoneg, so disable the laser control
1652	* functions for SFP+ fiber
1653	*/
1654	mac->ops.disable_tx_laser = NULL((void *)0);
1655	mac->ops.enable_tx_laser = NULL((void *)0);
1656	mac->ops.flap_tx_laser = NULL((void *)0);
1657	mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
1658	mac->ops.set_rate_select_speed =
1659	ixgbe_set_soft_rate_select_speed;
1660
1661	if ((hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N0x15C4) \|\|
1662	(hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP0x15CE))
1663	mac->ops.setup_mac_link =
1664	ixgbe_setup_mac_link_sfp_x550a;
1665	else
1666	mac->ops.setup_mac_link =
1667	ixgbe_setup_mac_link_sfp_x550em;
1668	break;
1669	case ixgbe_media_type_copper:
1670	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T0x15AE)
1671	break;
1672	if (hw->mac.type == ixgbe_mac_X550EM_a) {
1673	if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T0x15E4 \|\|
1674	hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L0x15E5) {
1675	mac->ops.setup_link = ixgbe_setup_sgmii_fw;
1676	mac->ops.check_link =
1677	ixgbe_check_mac_link_generic;
1678	} else {
1679	mac->ops.setup_link =
1680	ixgbe_setup_mac_link_t_X550em;
1681	}
1682	} else {
1683	mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
1684	mac->ops.check_link = ixgbe_check_link_t_X550em;
1685	}
1686	break;
1687	case ixgbe_media_type_backplane:
1688	if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII0x15C6 \|\|
1689	hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L0x15C7)
1690	mac->ops.setup_link = ixgbe_setup_sgmii;
1691	break;
1692	default:
1693	break;
1694	}
1695	}
1696
1697	/**
1698	* ixgbe_get_link_capabilities_x550em - Determines link capabilities
1699	* @hw: pointer to hardware structure
1700	* @speed: pointer to link speed
1701	* @autoneg: TRUE when autoneg or autotry is enabled
1702	*/
1703	int32_t ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
1704	ixgbe_link_speed *speed,
1705	bool_Bool *autoneg)
1706	{
1707	DEBUGFUNC("ixgbe_get_link_capabilities_X550em");;
1708
1709
1710	if (hw->phy.type == ixgbe_phy_fw) {
1711	*autoneg = TRUE1;
1712	*speed = hw->phy.speeds_supported;
1713	return 0;
1714	}
1715
1716	/* SFP */
1717	if (hw->phy.media_type == ixgbe_media_type_fiber) {
1718
1719	/* CS4227 SFP must not enable auto-negotiation */
1720	*autoneg = FALSE0;
1721
1722	/* Check if 1G SFP module. */
1723	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 \|\|
1724	hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1
1725	\|\| hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 \|\|
1726	hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
1727	*speed = IXGBE_LINK_SPEED_1GB_FULL0x0020;
1728	return IXGBE_SUCCESS0;
1729	}
1730
1731	/* Link capabilities are based on SFP */
1732	if (hw->phy.multispeed_fiber)
1733	*speed = IXGBE_LINK_SPEED_10GB_FULL0x0080 \|
1734	IXGBE_LINK_SPEED_1GB_FULL0x0020;
1735	else
1736	*speed = IXGBE_LINK_SPEED_10GB_FULL0x0080;
1737	} else {
1738	switch (hw->phy.type) {
1739	case ixgbe_phy_ext_1g_t:
1740	case ixgbe_phy_sgmii:
1741	*speed = IXGBE_LINK_SPEED_1GB_FULL0x0020;
1742	break;
1743	case ixgbe_phy_x550em_kr:
1744	if (hw->mac.type == ixgbe_mac_X550EM_a) {
1745	/* check different backplane modes */
1746	if (hw->phy.nw_mng_if_sel &
1747	IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G(1u << 20)) {
1748	*speed = IXGBE_LINK_SPEED_2_5GB_FULL0x0400;
1749	break;
1750	} else if (hw->device_id ==
1751	IXGBE_DEV_ID_X550EM_A_KR_L0x15C3) {
1752	*speed = IXGBE_LINK_SPEED_1GB_FULL0x0020;
1753	break;
1754	}
1755	}
1756	/* fall through */
1757	default:
1758	*speed = IXGBE_LINK_SPEED_10GB_FULL0x0080 \|
1759	IXGBE_LINK_SPEED_1GB_FULL0x0020;
1760	break;
1761	}
1762	*autoneg = TRUE1;
1763	}
1764
1765	return IXGBE_SUCCESS0;
1766	}
1767
1768	/**
1769	* ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
1770	* @hw: pointer to hardware structure
1771	* @lsc: pointer to boolean flag which indicates whether external Base T
1772	* PHY interrupt is lsc
1773	*
1774	* Determime if external Base T PHY interrupt cause is high temperature
1775	* failure alarm or link status change.
1776	*
1777	* Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
1778	* failure alarm, else return PHY access status.
1779	*/
1780	int32_t ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw hw, bool_Bool lsc)
1781	{
1782	uint32_t status;
1783	uint16_t reg;
1784
1785	*lsc = FALSE0;
1786
1787	/* Vendor alarm triggered */
1788	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG0xFC00,
1789	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1790	&reg);
1791
1792	if (status != IXGBE_SUCCESS0 \|\|
1793	!(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN0x1))
1794	return status;
1795
1796	/* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
1797	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG0xFC01,
1798	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1799	&reg);
1800
1801	if (status != IXGBE_SUCCESS0 \|\|
1802	!(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN0x1000 \|
1803	IXGBE_MDIO_GLOBAL_ALARM_1_INT0x4)))
1804	return status;
1805
1806	/* Global alarm triggered */
1807	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_10xCC00,
1808	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1809	&reg);
1810
1811	if (status != IXGBE_SUCCESS0)
1812	return status;
1813
1814	/* If high temperature failure, then return over temp error and exit */
1815	if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL0x4000) {
1816	/* power down the PHY in case the PHY FW didn't already */
1817	ixgbe_set_copper_phy_power(hw, FALSE0);
1818	return IXGBE_ERR_OVERTEMP-26;
1819	} else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT0x0010) {
1820	/* device fault alarm triggered */
1821	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG0xC850,
1822	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1823	&reg);
1824
1825	if (status != IXGBE_SUCCESS0)
1826	return status;
1827
1828	/* if device fault was due to high temp alarm handle and exit */
1829	if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP0x8007) {
1830	/* power down the PHY in case the PHY FW didn't */
1831	ixgbe_set_copper_phy_power(hw, FALSE0);
1832	return IXGBE_ERR_OVERTEMP-26;
1833	}
1834	}
1835
1836	/* Vendor alarm 2 triggered */
1837	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG0xFC00,
1838	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7, &reg);
1839
1840	if (status != IXGBE_SUCCESS0 \|\|
1841	!(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT0x200))
1842	return status;
1843
1844	/* link connect/disconnect event occurred */
1845	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM20xCC01,
1846	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7, &reg);
1847
1848	if (status != IXGBE_SUCCESS0)
1849	return status;
1850
1851	/* Indicate LSC */
1852	if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC0x1)
1853	*lsc = TRUE1;
1854
1855	return IXGBE_SUCCESS0;
1856	}
1857
1858	/**
1859	* ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
1860	* @hw: pointer to hardware structure
1861	*
1862	* Enable link status change and temperature failure alarm for the external
1863	* Base T PHY
1864	*
1865	* Returns PHY access status
1866	*/
1867	int32_t ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
1868	{
1869	uint32_t status;
1870	uint16_t reg;
1871	bool_Bool lsc;
1872
1873	/* Clear interrupt flags */
1874	status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
1875
1876	/* Enable link status change alarm */
1877
1878	/* Enable the LASI interrupts on X552 devices to receive notifications
1879	* of the link configurations of the external PHY and correspondingly
1880	* support the configuration of the internal iXFI link, since iXFI does
1881	* not support auto-negotiation. This is not required for X553 devices
1882	* having KR support, which performs auto-negotiations and which is used
1883	* as the internal link to the external PHY. Hence adding a check here
1884	* to avoid enabling LASI interrupts for X553 devices.
1885	*/
1886	if (hw->mac.type != ixgbe_mac_X550EM_a) {
1887	status = hw->phy.ops.read_reg(hw,
1888	IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK0xD401,
1889	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7, &reg);
1890
1891	if (status != IXGBE_SUCCESS0)
1892	return status;
1893
1894	reg \|= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN0x1;
1895
1896	status = hw->phy.ops.write_reg(hw,
1897	IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK0xD401,
1898	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7, reg);
1899
1900	if (status != IXGBE_SUCCESS0)
1901	return status;
1902	}
1903
1904	/* Enable high temperature failure and global fault alarms */
1905	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK0xD400,
1906	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1907	&reg);
1908
1909	if (status != IXGBE_SUCCESS0)
1910	return status;
1911
1912	reg \|= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN0x4000 \|
1913	IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN0x0010);
1914
1915	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK0xD400,
1916	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1917	reg);
1918
1919	if (status != IXGBE_SUCCESS0)
1920	return status;
1921
1922	/* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
1923	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK0xFF01,
1924	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1925	&reg);
1926
1927	if (status != IXGBE_SUCCESS0)
1928	return status;
1929
1930	reg \|= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN0x1000 \|
1931	IXGBE_MDIO_GLOBAL_ALARM_1_INT0x4);
1932
1933	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK0xFF01,
1934	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1935	reg);
1936
1937	if (status != IXGBE_SUCCESS0)
1938	return status;
1939
1940	/* Enable chip-wide vendor alarm */
1941	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK0xFF00,
1942	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1943	&reg);
1944
1945	if (status != IXGBE_SUCCESS0)
1946	return status;
1947
1948	reg \|= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN0x1;
1949
1950	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK0xFF00,
1951	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
1952	reg);
1953
1954	return status;
1955	}
1956
1957	/**
1958	* ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
1959	* @hw: pointer to hardware structure
1960	* @speed: link speed
1961	*
1962	* Configures the integrated KR PHY.
1963	**/
1964	int32_t ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
1965	ixgbe_link_speed speed)
1966	{
1967	int32_t status;
1968	uint32_t reg_val;
1969
1970	status = hw->mac.ops.read_iosf_sb_reg(hw,
1971	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1972	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
1973	if (status)
1974	return status;
1975
1976	reg_val \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE(1 << 29);
1977	reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR(1 << 18) \|
1978	IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX(1 << 16));
1979
1980	/* Advertise 10G support. */
1981	if (speed & IXGBE_LINK_SPEED_10GB_FULL0x0080)
1982	reg_val \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR(1 << 18);
1983
1984	/* Advertise 1G support. */
1985	if (speed & IXGBE_LINK_SPEED_1GB_FULL0x0020)
1986	reg_val \|= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX(1 << 16);
1987
1988	status = hw->mac.ops.write_iosf_sb_reg(hw,
1989	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
1990	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
1991
1992	if (hw->mac.type == ixgbe_mac_X550EM_a) {
1993	/* Set lane mode to KR auto negotiation */
1994	status = hw->mac.ops.read_iosf_sb_reg(hw,
1995	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
1996	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
1997
1998	if (status)
1999	return status;
2000
2001	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK(0x7 << 28);
2002	reg_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN(0x4 << 28);
2003	reg_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN(1u << 27);
2004	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN(1u << 26);
2005	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN(1u << 25);
2006
2007	status = hw->mac.ops.write_iosf_sb_reg(hw,
2008	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
2009	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2010	}
2011
2012	return ixgbe_restart_an_internal_phy_x550em(hw);
2013	}
2014
2015	/**
2016	* ixgbe_reset_phy_fw - Reset firmware-controlled PHYs
2017	* @hw: pointer to hardware structure
2018	*/
2019	int32_t ixgbe_reset_phy_fw(struct ixgbe_hw *hw)
2020	{
2021	uint32_t store[FW_PHY_ACT_DATA_COUNT4] = { 0 };
2022	int32_t rc;
2023
2024	if (hw->phy.reset_disable \|\| ixgbe_check_reset_blocked(hw))
2025	return IXGBE_SUCCESS0;
2026
2027	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET5, &store);
2028	if (rc)
2029	return rc;
2030	memset(store, 0, sizeof(store))__builtin_memset((store), (0), (sizeof(store)));
2031
2032	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY1, &store);
2033	if (rc)
2034	return rc;
2035
2036	return ixgbe_setup_fw_link(hw);
2037	}
2038
2039	/**
2040	* ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp
2041	* @hw: pointer to hardware structure
2042	*/
2043	int32_t ixgbe_check_overtemp_fw(struct ixgbe_hw *hw)
2044	{
2045	uint32_t store[FW_PHY_ACT_DATA_COUNT4] = { 0 };
2046	int32_t rc;
2047
2048	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO3, &store);
2049	if (rc)
2050	return rc;
2051
2052	if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP(1u << 25)) {
2053	ixgbe_shutdown_fw_phy(hw);
2054	return IXGBE_ERR_OVERTEMP-26;
2055	}
2056	return IXGBE_SUCCESS0;
2057	}
2058
2059	/**
2060	* ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
2061	* @hw: pointer to hardware structure
2062	*
2063	* Read NW_MNG_IF_SEL register and save field values, and check for valid field
2064	* values.
2065	**/
2066	int32_t ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw)
2067	{
2068	/* Save NW management interface connected on board. This is used
2069	* to determine internal PHY mode.
2070	*/
2071	hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00011178 )));
2072
2073	/* If X552 (X550EM_a) and MDIO is connected to external PHY, then set
2074	* PHY address. This register field was has only been used for X552.
2075	*/
2076	if (hw->mac.type == ixgbe_mac_X550EM_a &&
2077	hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT(1u << 1)) {
2078	hw->phy.addr = (hw->phy.nw_mng_if_sel &
2079	IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD(0x1F << 3)) >>
2080	IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT3;
2081	}
2082
2083	return IXGBE_SUCCESS0;
2084	}
2085
2086	/**
2087	* ixgbe_init_phy_ops_X550em - PHY/SFP specific init
2088	* @hw: pointer to hardware structure
2089	*
2090	* Initialize any function pointers that were not able to be
2091	* set during init_shared_code because the PHY/SFP type was
2092	* not known. Perform the SFP init if necessary.
2093	*/
2094	int32_t ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
2095	{
2096	struct ixgbe_phy_info *phy = &hw->phy;
2097	int32_t ret_val;
2098
2099	DEBUGFUNC("ixgbe_init_phy_ops_X550em");;
2100
2101	hw->mac.ops.set_lan_id(hw);
2102	ixgbe_read_mng_if_sel_x550em(hw);
2103
2104	if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
2105	phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM0x1806;
2106	ixgbe_setup_mux_ctl(hw);
2107	phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em;
2108	}
2109
2110	switch (hw->device_id) {
2111	case IXGBE_DEV_ID_X550EM_A_1G_T0x15E4:
2112	case IXGBE_DEV_ID_X550EM_A_1G_T_L0x15E5:
2113	phy->ops.read_reg_mdi = NULL((void *)0);
2114	phy->ops.write_reg_mdi = NULL((void *)0);
2115	hw->phy.ops.read_reg = NULL((void *)0);
2116	hw->phy.ops.write_reg = NULL((void *)0);
2117	phy->ops.check_overtemp = ixgbe_check_overtemp_fw;
2118	if (hw->bus.lan_id)
2119	hw->phy.phy_semaphore_mask \|= IXGBE_GSSR_PHY1_SM0x0004;
2120	else
2121	hw->phy.phy_semaphore_mask \|= IXGBE_GSSR_PHY0_SM0x0002;
2122
2123	break;
2124	case IXGBE_DEV_ID_X550EM_A_10G_T0x15C8:
2125	case IXGBE_DEV_ID_X550EM_A_SFP0x15CE:
2126	hw->phy.ops.read_reg = ixgbe_read_phy_reg_x550a;
2127	hw->phy.ops.write_reg = ixgbe_write_phy_reg_x550a;
2128	if (hw->bus.lan_id)
2129	hw->phy.phy_semaphore_mask \|= IXGBE_GSSR_PHY1_SM0x0004;
2130	else
2131	hw->phy.phy_semaphore_mask \|= IXGBE_GSSR_PHY0_SM0x0002;
2132	break;
2133	case IXGBE_DEV_ID_X550EM_X_SFP0x15AC:
2134	/* set up for CS4227 usage */
2135	hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM0x1806;
2136	break;
2137	case IXGBE_DEV_ID_X550EM_X_1G_T0x15AE:
2138	phy->ops.read_reg_mdi = NULL((void *)0);
2139	phy->ops.write_reg_mdi = NULL((void *)0);
2140	default:
2141	break;
2142	}
2143
2144	/* Identify the PHY or SFP module */
2145	ret_val = phy->ops.identify(hw);
2146	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED-19 \|\|
2147	ret_val == IXGBE_ERR_PHY_ADDR_INVALID-17)
2148	return ret_val;
2149
2150	/* Setup function pointers based on detected hardware */
2151	ixgbe_init_mac_link_ops_X550em(hw);
2152	if (phy->sfp_type != ixgbe_sfp_type_unknown)
2153	phy->ops.reset = NULL((void *)0);
2154
2155	/* Set functions pointers based on phy type */
2156	switch (hw->phy.type) {
2157	case ixgbe_phy_x550em_kx4:
2158	phy->ops.setup_link = NULL((void *)0);
2159	phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
2160	phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
2161	break;
2162	case ixgbe_phy_x550em_kr:
2163	phy->ops.setup_link = ixgbe_setup_kr_x550em;
2164	phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
2165	phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
2166	break;
2167	case ixgbe_phy_ext_1g_t:
2168	/* link is managed by FW */
2169	phy->ops.setup_link = NULL((void *)0);
2170	phy->ops.reset = NULL((void *)0);
2171	break;
2172	case ixgbe_phy_x550em_xfi:
2173	/* link is managed by HW */
2174	phy->ops.setup_link = NULL((void *)0);
2175	phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
2176	phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
2177	break;
2178	case ixgbe_phy_x550em_ext_t:
2179	/* If internal link mode is XFI, then setup iXFI internal link,
2180	* else setup KR now.
2181	*/
2182	phy->ops.setup_internal_link =
2183	ixgbe_setup_internal_phy_t_x550em;
2184
2185	/* setup SW LPLU only for first revision of X550EM_x */
2186	if ((hw->mac.type == ixgbe_mac_X550EM_x) &&
2187	!(IXGBE_FUSES0_REV_MASK(3 << 6) &
2188	IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), ((0x11158 + ((0) * 4)))))))
2189	phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
2190
2191	phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
2192	phy->ops.reset = ixgbe_reset_phy_t_X550em;
2193	break;
2194	case ixgbe_phy_sgmii:
2195	phy->ops.setup_link = NULL((void *)0);
2196	break;
2197	case ixgbe_phy_fw:
2198	phy->ops.setup_link = ixgbe_setup_fw_link;
2199	phy->ops.reset = ixgbe_reset_phy_fw;
2200	break;
2201	default:
2202	break;
2203	}
2204	return ret_val;
2205	}
2206
2207	/**
2208	* ixgbe_set_mdio_speed - Set MDIO clock speed
2209	* @hw: pointer to hardware structure
2210	*/
2211	void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
2212	{
2213	uint32_t hlreg0;
2214
2215	switch (hw->device_id) {
2216	case IXGBE_DEV_ID_X550EM_X_10G_T0x15AD:
2217	case IXGBE_DEV_ID_X550EM_A_SGMII0x15C6:
2218	case IXGBE_DEV_ID_X550EM_A_SGMII_L0x15C7:
2219	case IXGBE_DEV_ID_X550EM_A_10G_T0x15C8:
2220	case IXGBE_DEV_ID_X550EM_A_SFP0x15CE:
2221	case IXGBE_DEV_ID_X550EM_A_QSFP0x15CA:
2222	/* Config MDIO clock speed before the first MDIO PHY access */
2223	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x04240 )));
2224	hlreg0 &= ~IXGBE_HLREG0_MDCSPD0x00010000;
2225	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x04240 ), (hlreg0)));
2226	break;
2227	case IXGBE_DEV_ID_X550EM_A_1G_T0x15E4:
2228	case IXGBE_DEV_ID_X550EM_A_1G_T_L0x15E5:
2229	/* Select fast MDIO clock speed for these devices */
2230	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x04240 )));
2231	hlreg0 \|= IXGBE_HLREG0_MDCSPD0x00010000;
2232	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x04240 ), (hlreg0)));
2233	break;
2234	default:
2235	break;
2236	}
2237	}
2238
2239	/**
2240	* ixgbe_reset_hw_X550em - Perform hardware reset
2241	* @hw: pointer to hardware structure
2242	*
2243	* Resets the hardware by resetting the transmit and receive units, masks
2244	* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
2245	* reset.
2246	*/
2247	int32_t ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
2248	{
2249	ixgbe_link_speed link_speed;
2250	int32_t status;
2251	uint32_t ctrl = 0;
2252	uint32_t i;
2253	bool_Bool link_up = FALSE0;
2254	uint32_t swfw_mask = hw->phy.phy_semaphore_mask;
2255
2256	DEBUGFUNC("ixgbe_reset_hw_X550em");;
2257
2258	/* Call adapter stop to disable Tx/Rx and clear interrupts */
2259	status = hw->mac.ops.stop_adapter(hw);
2260	if (status != IXGBE_SUCCESS0) {
2261	DEBUGOUT1("Failed to stop adapter, STATUS = %d\n", status);
2262	return status;
2263	}
2264	/* flush pending Tx transactions */
2265	ixgbe_clear_tx_pending(hw);
2266
2267	ixgbe_set_mdio_speed(hw);
2268
2269	/* PHY ops must be identified and initialized prior to reset */
2270	status = hw->phy.ops.init(hw);
2271
2272	if (status)
2273	DEBUGOUT1("Failed to initialize PHY ops, STATUS = %d\n",
2274	status);
2275
2276	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED-19 \|\|
2277	status == IXGBE_ERR_PHY_ADDR_INVALID-17) {
2278	DEBUGOUT("Returning from reset HW due to PHY init failure\n");
2279	return status;
2280	}
2281
2282	/* start the external PHY */
2283	if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
2284	status = ixgbe_init_ext_t_x550em(hw);
2285	if (status) {
2286	DEBUGOUT1("Failed to start the external PHY, STATUS = %d\n",
2287	status);
2288	return status;
2289	}
2290	}
2291
2292	/* Setup SFP module if there is one present. */
2293	if (hw->phy.sfp_setup_needed) {
2294	status = hw->mac.ops.setup_sfp(hw);
2295	hw->phy.sfp_setup_needed = FALSE0;
2296	}
2297
2298	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED-19)
2299	return status;
2300
2301	/* Reset PHY */
2302	if (!hw->phy.reset_disable && hw->phy.ops.reset) {
2303	if (hw->phy.ops.reset(hw) == IXGBE_ERR_OVERTEMP-26)
2304	return IXGBE_ERR_OVERTEMP-26;
2305	}
2306
2307	mac_reset_top:
2308	/* Issue global reset to the MAC. Needs to be SW reset if link is up.
2309	* If link reset is used when link is up, it might reset the PHY when
2310	* mng is using it. If link is down or the flag to force full link
2311	* reset is set, then perform link reset.
2312	*/
2313	ctrl = IXGBE_CTRL_LNK_RST0x00000008;
2314	if (!hw->force_full_reset) {
2315	hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE0);
2316	if (link_up)
2317	ctrl = IXGBE_CTRL_RST0x04000000;
2318	}
2319
2320	status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
2321	if (status != IXGBE_SUCCESS0) {
2322	ERROR_REPORT2(IXGBE_ERROR_CAUTION,
2323	"semaphore failed with %d", status);
2324	return IXGBE_ERR_SWFW_SYNC-16;
2325	}
2326	ctrl \|= IXGBE_READ_REG(hw, IXGBE_CTRL)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00000 )));
2327	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00000 ), (ctrl)));
2328	IXGBE_WRITE_FLUSH(hw)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00008 )));
2329	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
2330
2331	/* Poll for reset bit to self-clear meaning reset is complete */
2332	for (i = 0; i < 10; i++) {
2333	usec_delay(1)(*delay_func)(1);
2334	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00000 )));
2335	if (!(ctrl & IXGBE_CTRL_RST_MASK(0x00000008 \| 0x04000000)))
2336	break;
2337	}
2338
2339	if (ctrl & IXGBE_CTRL_RST_MASK(0x00000008 \| 0x04000000)) {
2340	status = IXGBE_ERR_RESET_FAILED-15;
2341	DEBUGOUT("Reset polling failed to complete.\n");
2342	}
2343
2344	msec_delay(50)(delay_func)(1000 (50));
2345
2346	/* Double resets are required for recovery from certain error
2347	* conditions. Between resets, it is necessary to stall to
2348	* allow time for any pending HW events to complete.
2349	*/
2350	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED0x01) {
2351	hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED0x01;
2352	goto mac_reset_top;
2353	}
2354
2355	/* Store the permanent mac address */
2356	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
2357
2358	/* Store MAC address from RAR0, clear receive address registers, and
2359	* clear the multicast table. Also reset num_rar_entries to 128,
2360	* since we modify this value when programming the SAN MAC address.
2361	*/
2362	hw->mac.num_rar_entries = 128;
2363	hw->mac.ops.init_rx_addrs(hw);
2364
2365	ixgbe_set_mdio_speed(hw);
2366
2367	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP0x15AC)
2368	ixgbe_setup_mux_ctl(hw);
2369
2370	if (status != IXGBE_SUCCESS0)
2371	DEBUGOUT1("Reset HW failed, STATUS = %d\n", status);
2372
2373	return status;
2374	}
2375
2376	/**
2377	* ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
2378	* @hw: pointer to hardware structure
2379	*/
2380	int32_t ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
2381	{
2382	uint32_t status;
2383	uint16_t reg;
2384
2385	status = hw->phy.ops.read_reg(hw,
2386	IXGBE_MDIO_TX_VENDOR_ALARMS_30xCC02,
2387	IXGBE_MDIO_PMA_PMD_DEV_TYPE0x1,
2388	&reg);
2389
2390	if (status != IXGBE_SUCCESS0)
2391	return status;
2392
2393	/* If PHY FW reset completed bit is set then this is the first
2394	* SW instance after a power on so the PHY FW must be un-stalled.
2395	*/
2396	if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK0x3) {
2397	status = hw->phy.ops.read_reg(hw,
2398	IXGBE_MDIO_GLOBAL_RES_PR_100xC479,
2399	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
2400	&reg);
2401
2402	if (status != IXGBE_SUCCESS0)
2403	return status;
2404
2405	reg &= ~IXGBE_MDIO_POWER_UP_STALL0x8000;
2406
2407	status = hw->phy.ops.write_reg(hw,
2408	IXGBE_MDIO_GLOBAL_RES_PR_100xC479,
2409	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E,
2410	reg);
2411
2412	if (status != IXGBE_SUCCESS0)
2413	return status;
2414	}
2415
2416	return status;
2417	}
2418
2419	/**
2420	* ixgbe_setup_kr_x550em - Configure the KR PHY.
2421	* @hw: pointer to hardware structure
2422	**/
2423	int32_t ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
2424	{
2425	/* leave link alone for 2.5G */
2426	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL0x0400)
2427	return IXGBE_SUCCESS0;
2428
2429	if (ixgbe_check_reset_blocked(hw))
2430	return 0;
2431
2432	return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
2433	}
2434
2435	/**
2436	* ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
2437	* @hw: pointer to hardware structure
2438	* @speed: new link speed
2439	* @autoneg_wait_to_complete: unused
2440	*
2441	* Configure the external PHY and the integrated KR PHY for SFP support.
2442	**/
2443	int32_t ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
2444	ixgbe_link_speed speed,
2445	bool_Bool autoneg_wait_to_complete)
2446	{
2447	int32_t ret_val;
2448	uint16_t reg_slice, reg_val;
2449	bool_Bool setup_linear = FALSE0;
2450
2451	/* Check if SFP module is supported and linear */
2452	ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
2453
2454	/* If no SFP module present, then return success. Return success since
2455	* there is no reason to configure CS4227 and SFP not present error is
2456	* not excepted in the setup MAC link flow.
2457	*/
2458	if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT-20)
2459	return IXGBE_SUCCESS0;
2460
2461	if (ret_val != IXGBE_SUCCESS0)
2462	return ret_val;
2463
2464	/* Configure internal PHY for KR/KX. */
2465	ixgbe_setup_kr_speed_x550em(hw, speed);
2466
2467	/* Configure CS4227 LINE side to proper mode. */
2468	reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB0x12B0 +
2469	(hw->bus.lan_id << 12);
2470	if (setup_linear)
2471	reg_val = (IXGBE_CS4227_EDC_MODE_CX10x0002 << 1) \| 0x1;
2472	else
2473	reg_val = (IXGBE_CS4227_EDC_MODE_SR0x0004 << 1) \| 0x1;
2474	ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
2475	reg_val);
2476	return ret_val;
2477	}
2478
2479	/**
2480	* ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
2481	* @hw: pointer to hardware structure
2482	* @speed: the link speed to force
2483	*
2484	* Configures the integrated PHY for native SFI mode. Used to connect the
2485	* internal PHY directly to an SFP cage, without autonegotiation.
2486	**/
2487	int32_t ixgbe_setup_sfi_x550a(struct ixgbe_hw hw, ixgbe_link_speed speed)
2488	{
2489	struct ixgbe_mac_info *mac = &hw->mac;
2490	int32_t status;
2491	uint32_t reg_val;
2492
2493	/* Disable all AN and force speed to 10G Serial. */
2494	status = mac->ops.read_iosf_sb_reg(hw,
2495	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
2496	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2497	if (status != IXGBE_SUCCESS0)
2498	return status;
2499
2500	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN(1u << 27);
2501	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN(1u << 26);
2502	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN(1u << 25);
2503	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK(0x7 << 28);
2504
2505	/* Select forced link speed for internal PHY. */
2506	switch (*speed) {
2507	case IXGBE_LINK_SPEED_10GB_FULL0x0080:
2508	reg_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G(0x3 << 28);
2509	break;
2510	case IXGBE_LINK_SPEED_1GB_FULL0x0020:
2511	reg_val \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G(0x2 << 28);
2512	break;
2513	default:
2514	/* Other link speeds are not supported by internal PHY. */
2515	return IXGBE_ERR_LINK_SETUP-8;
2516	}
2517
2518	status = mac->ops.write_iosf_sb_reg(hw,
	Value stored to 'status' is never read
2519	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
2520	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2521
2522	/* Toggle port SW reset by AN reset. */
2523	status = ixgbe_restart_an_internal_phy_x550em(hw);
2524
2525	return status;
2526	}
2527
2528	/**
2529	* ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
2530	* @hw: pointer to hardware structure
2531	* @speed: new link speed
2532	* @autoneg_wait_to_complete: unused
2533	*
2534	* Configure the integrated PHY for SFP support.
2535	**/
2536	int32_t ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
2537	ixgbe_link_speed speed,
2538	bool_Bool autoneg_wait_to_complete)
2539	{
2540	int32_t ret_val;
2541	uint16_t reg_phy_ext;
2542	bool_Bool setup_linear = FALSE0;
2543	uint32_t reg_slice, reg_phy_int, slice_offset;
2544
2545	/* Check if SFP module is supported and linear */
2546	ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
2547
2548	/* If no SFP module present, then return success. Return success since
2549	* SFP not present error is not excepted in the setup MAC link flow.
2550	*/
2551	if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT-20)
2552	return IXGBE_SUCCESS0;
2553
2554	if (ret_val != IXGBE_SUCCESS0)
2555	return ret_val;
2556
2557	if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N0x15C4) {
2558	/* Configure internal PHY for native SFI based on module type */
2559	ret_val = hw->mac.ops.read_iosf_sb_reg(hw,
2560	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
2561	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_phy_int);
2562
2563	if (ret_val != IXGBE_SUCCESS0)
2564	return ret_val;
2565
2566	reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA~(0x3 << 20);
2567	if (!setup_linear)
2568	reg_phy_int \|= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR(1u << 20);
2569
2570	ret_val = hw->mac.ops.write_iosf_sb_reg(hw,
2571	IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9054 : 0x5054),
2572	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_phy_int);
2573
2574	if (ret_val != IXGBE_SUCCESS0)
2575	return ret_val;
2576
2577	/* Setup SFI internal link. */
2578	ret_val = ixgbe_setup_sfi_x550a(hw, &speed);
2579	} else {
2580	/* Configure internal PHY for KR/KX. */
2581	ixgbe_setup_kr_speed_x550em(hw, speed);
2582
2583	if (hw->phy.addr == 0x0 \|\| hw->phy.addr == 0xFFFF) {
2584	/* Find Address */
2585	DEBUGOUT("Invalid NW_MNG_IF_SEL.MDIO_PHY_ADD value\n");
2586	return IXGBE_ERR_PHY_ADDR_INVALID-17;
2587	}
2588
2589	/* Get external PHY SKU id */
2590	ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU0x19F,
2591	IXGBE_MDIO_ZERO_DEV_TYPE0x0, &reg_phy_ext);
2592
2593	if (ret_val != IXGBE_SUCCESS0)
2594	return ret_val;
2595
2596	/* When configuring quad port CS4223, the MAC instance is part
2597	* of the slice offset.
2598	*/
2599	if (reg_phy_ext == IXGBE_CS4223_SKU_ID0x0010)
2600	slice_offset = (hw->bus.lan_id +
2601	(hw->bus.instance_id << 1)) << 12;
2602	else
2603	slice_offset = hw->bus.lan_id << 12;
2604
2605	/* Configure CS4227/CS4223 LINE side to proper mode. */
2606	reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB0x12B0 + slice_offset;
2607
2608	ret_val = hw->phy.ops.read_reg(hw, reg_slice,
2609	IXGBE_MDIO_ZERO_DEV_TYPE0x0, &reg_phy_ext);
2610
2611	if (ret_val != IXGBE_SUCCESS0)
2612	return ret_val;
2613
2614	reg_phy_ext &= ~((IXGBE_CS4227_EDC_MODE_CX10x0002 << 1) \|
2615	(IXGBE_CS4227_EDC_MODE_SR0x0004 << 1));
2616
2617	if (setup_linear)
2618	reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX10x0002 << 1) \| 0x1;
2619	else
2620	reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR0x0004 << 1) \| 0x1;
2621	ret_val = hw->phy.ops.write_reg(hw, reg_slice,
2622	IXGBE_MDIO_ZERO_DEV_TYPE0x0, reg_phy_ext);
2623
2624	/* Flush previous write with a read */
2625	ret_val = hw->phy.ops.read_reg(hw, reg_slice,
2626	IXGBE_MDIO_ZERO_DEV_TYPE0x0, &reg_phy_ext);
2627	}
2628	return ret_val;
2629	}
2630
2631	/**
2632	* ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
2633	* @hw: pointer to hardware structure
2634	*
2635	* iXfI configuration needed for ixgbe_mac_X550EM_x devices.
2636	**/
2637	int32_t ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
2638	{
2639	struct ixgbe_mac_info *mac = &hw->mac;
2640	int32_t status;
2641	uint32_t reg_val;
2642
2643	/* Disable training protocol FSM. */
2644	status = mac->ops.read_iosf_sb_reg(hw,
2645	IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8B00 : 0x4B00),
2646	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2647	if (status != IXGBE_SUCCESS0)
2648	return status;
2649	reg_val \|= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL(1 << 4);
2650	status = mac->ops.write_iosf_sb_reg(hw,
2651	IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8B00 : 0x4B00),
2652	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2653	if (status != IXGBE_SUCCESS0)
2654	return status;
2655
2656	/* Disable Flex from training TXFFE. */
2657	status = mac->ops.read_iosf_sb_reg(hw,
2658	IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8634 : 0x4634),
2659	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2660	if (status != IXGBE_SUCCESS0)
2661	return status;
2662	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN(1 << 6);
2663	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN(1 << 15);
2664	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN(1 << 16);
2665	status = mac->ops.write_iosf_sb_reg(hw,
2666	IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8634 : 0x4634),
2667	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2668	if (status != IXGBE_SUCCESS0)
2669	return status;
2670	status = mac->ops.read_iosf_sb_reg(hw,
2671	IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8638 : 0x4638),
2672	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2673	if (status != IXGBE_SUCCESS0)
2674	return status;
2675	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN(1 << 6);
2676	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN(1 << 15);
2677	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN(1 << 16);
2678	status = mac->ops.write_iosf_sb_reg(hw,
2679	IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8638 : 0x4638),
2680	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2681	if (status != IXGBE_SUCCESS0)
2682	return status;
2683
2684	/* Enable override for coefficients. */
2685	status = mac->ops.read_iosf_sb_reg(hw,
2686	IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9520 : 0x5520),
2687	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2688	if (status != IXGBE_SUCCESS0)
2689	return status;
2690	reg_val \|= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN(1U << 31);
2691	reg_val \|= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN(1 << 3);
2692	reg_val \|= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN(1 << 2);
2693	reg_val \|= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN(1 << 1);
2694	status = mac->ops.write_iosf_sb_reg(hw,
2695	IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x9520 : 0x5520),
2696	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2697	return status;
2698	}
2699
2700	/**
2701	* ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
2702	* @hw: pointer to hardware structure
2703	* @speed: the link speed to force
2704	*
2705	* Configures the integrated KR PHY to use iXFI mode. Used to connect an
2706	* internal and external PHY at a specific speed, without autonegotiation.
2707	**/
2708	int32_t ixgbe_setup_ixfi_x550em(struct ixgbe_hw hw, ixgbe_link_speed speed)
2709	{
2710	struct ixgbe_mac_info *mac = &hw->mac;
2711	int32_t status;
2712	uint32_t reg_val;
2713
2714	/* iXFI is only supported with X552 */
2715	if (mac->type != ixgbe_mac_X550EM_x)
2716	return IXGBE_ERR_LINK_SETUP-8;
2717
2718	/* Disable AN and force speed to 10G Serial. */
2719	status = mac->ops.read_iosf_sb_reg(hw,
2720	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
2721	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2722	if (status != IXGBE_SUCCESS0)
2723	return status;
2724
2725	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE(1 << 29);
2726	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK(0x7 << 8);
2727
2728	/* Select forced link speed for internal PHY. */
2729	switch (*speed) {
2730	case IXGBE_LINK_SPEED_10GB_FULL0x0080:
2731	reg_val \|= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G(4 << 8);
2732	break;
2733	case IXGBE_LINK_SPEED_1GB_FULL0x0020:
2734	reg_val \|= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G(2 << 8);
2735	break;
2736	default:
2737	/* Other link speeds are not supported by internal KR PHY. */
2738	return IXGBE_ERR_LINK_SETUP-8;
2739	}
2740
2741	status = mac->ops.write_iosf_sb_reg(hw,
2742	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
2743	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2744	if (status != IXGBE_SUCCESS0)
2745	return status;
2746
2747	/* Additional configuration needed for x550em_x */
2748	if (hw->mac.type == ixgbe_mac_X550EM_x) {
2749	status = ixgbe_setup_ixfi_x550em_x(hw);
2750	if (status != IXGBE_SUCCESS0)
2751	return status;
2752	}
2753
2754	/* Toggle port SW reset by AN reset. */
2755	status = ixgbe_restart_an_internal_phy_x550em(hw);
2756
2757	return status;
2758	}
2759
2760	/**
2761	* ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
2762	* @hw: address of hardware structure
2763	* @link_up: address of boolean to indicate link status
2764	*
2765	* Returns error code if unable to get link status.
2766	*/
2767	int32_t ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw hw, bool_Bool link_up)
2768	{
2769	uint32_t ret;
2770	uint16_t autoneg_status;
2771
2772	*link_up = FALSE0;
2773
2774	/* read this twice back to back to indicate current status */
2775	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS0x1,
2776	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
2777	&autoneg_status);
2778	if (ret != IXGBE_SUCCESS0)
2779	return ret;
2780
2781	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS0x1,
2782	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
2783	&autoneg_status);
2784	if (ret != IXGBE_SUCCESS0)
2785	return ret;
2786
2787	*link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS0x4);
2788
2789	return IXGBE_SUCCESS0;
2790	}
2791
2792	/**
2793	* ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
2794	* @hw: point to hardware structure
2795	*
2796	* Configures the link between the integrated KR PHY and the external X557 PHY
2797	* The driver will call this function when it gets a link status change
2798	* interrupt from the X557 PHY. This function configures the link speed
2799	* between the PHYs to match the link speed of the BASE-T link.
2800	*
2801	* A return of a non-zero value indicates an error, and the base driver should
2802	* not report link up.
2803	*/
2804	int32_t ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
2805	{
2806	ixgbe_link_speed force_speed;
2807	bool_Bool link_up;
2808	uint32_t status;
2809	uint16_t speed;
2810
2811	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
2812	return IXGBE_ERR_CONFIG-4;
2813
2814	if (hw->mac.type == ixgbe_mac_X550EM_x &&
2815	!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE(1 << 24))) {
2816	/* If link is down, there is no setup necessary so return */
2817	status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2818	if (status != IXGBE_SUCCESS0)
2819	return status;
2820
2821	if (!link_up)
2822	return IXGBE_SUCCESS0;
2823
2824	status = hw->phy.ops.read_reg(hw,
2825	IXGBE_MDIO_AUTO_NEG_VENDOR_STAT0xC800,
2826	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
2827	&speed);
2828	if (status != IXGBE_SUCCESS0)
2829	return status;
2830
2831	/* If link is still down - no setup is required so return */
2832	status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2833	if (status != IXGBE_SUCCESS0)
2834	return status;
2835	if (!link_up)
2836	return IXGBE_SUCCESS0;
2837
2838	/* clear everything but the speed and duplex bits */
2839	speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK0x7;
2840
2841	switch (speed) {
2842	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL0x7:
2843	force_speed = IXGBE_LINK_SPEED_10GB_FULL0x0080;
2844	break;
2845	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL0x5:
2846	force_speed = IXGBE_LINK_SPEED_1GB_FULL0x0020;
2847	break;
2848	default:
2849	/* Internal PHY does not support anything else */
2850	return IXGBE_ERR_INVALID_LINK_SETTINGS-13;
2851	}
2852
2853	return ixgbe_setup_ixfi_x550em(hw, &force_speed);
2854	} else {
2855	speed = IXGBE_LINK_SPEED_10GB_FULL0x0080 \|
2856	IXGBE_LINK_SPEED_1GB_FULL0x0020;
2857	return ixgbe_setup_kr_speed_x550em(hw, speed);
2858	}
2859	}
2860
2861	/**
2862	* ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
2863	* @hw: pointer to hardware structure
2864	*
2865	* Configures the integrated KR PHY to use internal loopback mode.
2866	**/
2867	int32_t ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
2868	{
2869	int32_t status;
2870	uint32_t reg_val;
2871
2872	/* Disable AN and force speed to 10G Serial. */
2873	status = hw->mac.ops.read_iosf_sb_reg(hw,
2874	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
2875	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2876	if (status != IXGBE_SUCCESS0)
2877	return status;
2878	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE(1 << 29);
2879	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK(0x7 << 8);
2880	reg_val \|= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G(4 << 8);
2881	status = hw->mac.ops.write_iosf_sb_reg(hw,
2882	IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x820C : 0x420C),
2883	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2884	if (status != IXGBE_SUCCESS0)
2885	return status;
2886
2887	/* Set near-end loopback clocks. */
2888	status = hw->mac.ops.read_iosf_sb_reg(hw,
2889	IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8010 : 0x4010),
2890	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2891	if (status != IXGBE_SUCCESS0)
2892	return status;
2893	reg_val \|= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B(1 << 9);
2894	reg_val \|= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS(1 << 11);
2895	status = hw->mac.ops.write_iosf_sb_reg(hw,
2896	IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8010 : 0x4010),
2897	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2898	if (status != IXGBE_SUCCESS0)
2899	return status;
2900
2901	/* Set loopback enable. */
2902	status = hw->mac.ops.read_iosf_sb_reg(hw,
2903	IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8E00 : 0x4E00),
2904	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2905	if (status != IXGBE_SUCCESS0)
2906	return status;
2907	reg_val \|= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK(0x3 << 16);
2908	status = hw->mac.ops.write_iosf_sb_reg(hw,
2909	IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8E00 : 0x4E00),
2910	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2911	if (status != IXGBE_SUCCESS0)
2912	return status;
2913
2914	/* Training bypass. */
2915	status = hw->mac.ops.read_iosf_sb_reg(hw,
2916	IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8B00 : 0x4B00),
2917	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
2918	if (status != IXGBE_SUCCESS0)
2919	return status;
2920	reg_val \|= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS(1 << 2);
2921	status = hw->mac.ops.write_iosf_sb_reg(hw,
2922	IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8B00 : 0x4B00),
2923	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
2924
2925	return status;
2926	}
2927
2928	/**
2929	* ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
2930	* assuming that the semaphore is already obtained.
2931	* @hw: pointer to hardware structure
2932	* @offset: offset of word in the EEPROM to read
2933	* @data: word read from the EEPROM
2934	*
2935	* Reads a 16 bit word from the EEPROM using the hostif.
2936	**/
2937	int32_t ixgbe_read_ee_hostif_X550(struct ixgbe_hw hw, uint16_t offset,uint16_t data)
2938	{
2939	const uint32_t mask = IXGBE_GSSR_SW_MNG_SM0x0400 \| IXGBE_GSSR_EEP_SM0x0001;
2940	struct ixgbe_hic_read_shadow_ram buffer;
2941	int32_t status;
2942
2943	DEBUGFUNC("ixgbe_read_ee_hostif_X550");;
2944	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD0x31;
2945	buffer.hdr.req.buf_lenh = 0;
2946	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN0x6;
2947	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM0xFF;
2948
2949	/* convert offset from words to bytes */
2950	buffer.address = htobe32(offset * 2)(__uint32_t)(__builtin_constant_p(offset * 2) ? (__uint32_t)( ((__uint32_t)(offset * 2) & 0xff) << 24 \| ((__uint32_t )(offset * 2) & 0xff00) << 8 \| ((__uint32_t)(offset * 2) & 0xff0000) >> 8 \| ((__uint32_t)(offset * 2) & 0xff000000) >> 24) : __swap32md(offset * 2));
2951	/* one word */
2952	buffer.length = htobe16(sizeof(uint16_t))(__uint16_t)(__builtin_constant_p(sizeof(uint16_t)) ? (__uint16_t )(((__uint16_t)(sizeof(uint16_t)) & 0xffU) << 8 \| ( (__uint16_t)(sizeof(uint16_t)) & 0xff00U) >> 8) : __swap16md (sizeof(uint16_t)));
2953	buffer.pad2 = 0;
2954	buffer.pad3 = 0;
2955
2956	status = hw->mac.ops.acquire_swfw_sync(hw, mask);
2957	if (status)
2958	return status;
2959
2960	status = ixgbe_hic_unlocked(hw, (uint32_t *)&buffer, sizeof(buffer),
2961	IXGBE_HI_COMMAND_TIMEOUT500);
2962	if (!status) {
2963	data = (uint16_t)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep *)(hw)->back)->os_memh), ((0x15800 + ((3) << 2)))))
2964	FW_NVM_DATA_OFFSET)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), ((0x15800 + ((3) << 2)))));
2965	}
2966
2967	hw->mac.ops.release_swfw_sync(hw, mask);
2968	return status;
2969	}
2970
2971	/**
2972	* ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
2973	* @hw: pointer to hardware structure
2974	* @offset: offset of word in the EEPROM to read
2975	* @words: number of words
2976	* @data: word(s) read from the EEPROM
2977	*
2978	* Reads a 16 bit word(s) from the EEPROM using the hostif.
2979	**/
2980	int32_t ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
2981	uint16_t offset, uint16_t words,
2982	uint16_t *data)
2983	{
2984	const uint32_t mask = IXGBE_GSSR_SW_MNG_SM0x0400 \| IXGBE_GSSR_EEP_SM0x0001;
2985	struct ixgbe_hic_read_shadow_ram buffer;
2986	uint32_t current_word = 0;
2987	uint16_t words_to_read;
2988	int32_t status;
2989	uint32_t i;
2990
2991	DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550");;
2992
2993	/* Take semaphore for the entire operation. */
2994	status = hw->mac.ops.acquire_swfw_sync(hw, mask);
2995	if (status) {
2996	DEBUGOUT("EEPROM read buffer - semaphore failed\n");
2997	return status;
2998	}
2999
3000	while (words) {
3001	if (words > FW_MAX_READ_BUFFER_SIZE1024 / 2)
3002	words_to_read = FW_MAX_READ_BUFFER_SIZE1024 / 2;
3003	else
3004	words_to_read = words;
3005
3006	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD0x31;
3007	buffer.hdr.req.buf_lenh = 0;
3008	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN0x6;
3009	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM0xFF;
3010
3011	/* convert offset from words to bytes */
3012	buffer.address = htobe32((offset + current_word) * 2)(__uint32_t)(__builtin_constant_p((offset + current_word) * 2 ) ? (__uint32_t)(((__uint32_t)((offset + current_word) * 2) & 0xff) << 24 \| ((__uint32_t)((offset + current_word) * 2 ) & 0xff00) << 8 \| ((__uint32_t)((offset + current_word ) * 2) & 0xff0000) >> 8 \| ((__uint32_t)((offset + current_word ) * 2) & 0xff000000) >> 24) : __swap32md((offset + current_word ) * 2));
3013	buffer.length = htobe16(words_to_read * 2)(__uint16_t)(__builtin_constant_p(words_to_read * 2) ? (__uint16_t )(((__uint16_t)(words_to_read * 2) & 0xffU) << 8 \| ( (__uint16_t)(words_to_read * 2) & 0xff00U) >> 8) : __swap16md (words_to_read * 2));
3014	buffer.pad2 = 0;
3015	buffer.pad3 = 0;
3016
3017	status = ixgbe_hic_unlocked(hw, (uint32_t *)&buffer, sizeof(buffer),
3018	IXGBE_HI_COMMAND_TIMEOUT500);
3019
3020	if (status) {
3021	DEBUGOUT("Host interface command failed\n");
3022	goto out;
3023	}
3024
3025	for (i = 0; i < words_to_read; i++) {
3026	uint32_t reg = IXGBE_FLEX_MNG0x15800 + (FW_NVM_DATA_OFFSET3 << 2) +
3027	2 * i;
3028	uint32_t value = IXGBE_READ_REG(hw, reg)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (reg)));
3029
3030	data[current_word] = (uint16_t)(value & 0xffff);
3031	current_word++;
3032	i++;
3033	if (i < words_to_read) {
3034	value >>= 16;
3035	data[current_word] = (uint16_t)(value & 0xffff);
3036	current_word++;
3037	}
3038	}
3039	words -= words_to_read;
3040	}
3041
3042	out:
3043	hw->mac.ops.release_swfw_sync(hw, mask);
3044	return status;
3045	}
3046
3047	/**
3048	* ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
3049	* @hw: pointer to hardware structure
3050	* @offset: offset of word in the EEPROM to write
3051	* @data: word write to the EEPROM
3052	*
3053	* Write a 16 bit word to the EEPROM using the hostif.
3054	**/
3055	int32_t ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, uint16_t offset,
3056	uint16_t data)
3057	{
3058	int32_t status;
3059	struct ixgbe_hic_write_shadow_ram buffer;
3060
3061	DEBUGFUNC("ixgbe_write_ee_hostif_data_X550");;
3062
3063	buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD0x33;
3064	buffer.hdr.req.buf_lenh = 0;
3065	buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN0xA;
3066	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM0xFF;
3067
3068	/* one word */
3069	buffer.length = htobe16(sizeof(uint16_t))(__uint16_t)(__builtin_constant_p(sizeof(uint16_t)) ? (__uint16_t )(((__uint16_t)(sizeof(uint16_t)) & 0xffU) << 8 \| ( (__uint16_t)(sizeof(uint16_t)) & 0xff00U) >> 8) : __swap16md (sizeof(uint16_t)));
3070	buffer.data = data;
3071	buffer.address = htobe32(offset * 2)(__uint32_t)(__builtin_constant_p(offset * 2) ? (__uint32_t)( ((__uint32_t)(offset * 2) & 0xff) << 24 \| ((__uint32_t )(offset * 2) & 0xff00) << 8 \| ((__uint32_t)(offset * 2) & 0xff0000) >> 8 \| ((__uint32_t)(offset * 2) & 0xff000000) >> 24) : __swap32md(offset * 2));
3072
3073	status = ixgbe_host_interface_command(hw, (uint32_t *)&buffer,
3074	sizeof(buffer),
3075	IXGBE_HI_COMMAND_TIMEOUT500, FALSE0);
3076
3077	return status;
3078	}
3079
3080	/**
3081	* ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
3082	* @hw: pointer to hardware structure
3083	* @offset: offset of word in the EEPROM to write
3084	* @data: word write to the EEPROM
3085	*
3086	* Write a 16 bit word to the EEPROM using the hostif.
3087	**/
3088	int32_t ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, uint16_t offset,
3089	uint16_t data)
3090	{
3091	int32_t status = IXGBE_SUCCESS0;
3092
3093	DEBUGFUNC("ixgbe_write_ee_hostif_X550");;
3094
3095	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM0x0001) ==
3096	IXGBE_SUCCESS0) {
3097	status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
3098	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM0x0001);
3099	} else {
3100	DEBUGOUT("write ee hostif failed to get semaphore");
3101	status = IXGBE_ERR_SWFW_SYNC-16;
3102	}
3103
3104	return status;
3105	}
3106
3107	/**
3108	* ixgbe_checksum_ptr_x550 - Checksum one pointer region
3109	* @hw: pointer to hardware structure
3110	* @ptr: pointer offset in eeprom
3111	* @size: size of section pointed by ptr, if 0 first word will be used as size
3112	* @csum: address of checksum to update
3113	* @buffer: pointer to buffer containing calculated checksum
3114	* @buffer_size: size of buffer
3115	*
3116	* Returns error status for any failure
3117	*/
3118	int32_t ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, uint16_t ptr,
3119	uint16_t size, uint16_t csum, uint16_t buffer,
3120	uint32_t buffer_size)
3121	{
3122	uint16_t buf[256];
3123	int32_t status;
3124	uint16_t length, bufsz, i, start;
3125	uint16_t *local_buffer;
3126
3127	bufsz = sizeof(buf) / sizeof(buf[0]);
3128
3129	/* Read a chunk at the pointer location */
3130	if (!buffer) {
3131	status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
3132	if (status) {
3133	DEBUGOUT("Failed to read EEPROM image\n");
3134	return status;
3135	}
3136	local_buffer = buf;
3137	} else {
3138	if (buffer_size < ptr)
3139	return IXGBE_ERR_PARAM-5;
3140	local_buffer = &buffer[ptr];
3141	}
3142
3143	if (size) {
3144	start = 0;
3145	length = size;
3146	} else {
3147	start = 1;
3148	length = local_buffer[0];
3149
3150	/* Skip pointer section if length is invalid. */
3151	if (length == 0xFFFF \|\| length == 0 \|\|
3152	(ptr + length) >= hw->eeprom.word_size)
3153	return IXGBE_SUCCESS0;
3154	}
3155
3156	if (buffer && ((uint32_t)start + (uint32_t)length > buffer_size))
3157	return IXGBE_ERR_PARAM-5;
3158
3159	for (i = start; length; i++, length--) {
3160	if (i == bufsz && !buffer) {
3161	ptr += bufsz;
3162	i = 0;
3163	if (length < bufsz)
3164	bufsz = length;
3165
3166	/* Read a chunk at the pointer location */
3167	status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
3168	bufsz, buf);
3169	if (status) {
3170	DEBUGOUT("Failed to read EEPROM image\n");
3171	return status;
3172	}
3173	}
3174	*csum += local_buffer[i];
3175	}
3176	return IXGBE_SUCCESS0;
3177	}
3178
3179	/**
3180	* ixgbe_calc_checksum_X550 - Calculates and returns the checksum
3181	* @hw: pointer to hardware structure
3182	* @buffer: pointer to buffer containing calculated checksum
3183	* @buffer_size: size of buffer
3184	*
3185	* Returns a negative error code on error, or the 16-bit checksum
3186	**/
3187	int32_t ixgbe_calc_checksum_X550(struct ixgbe_hw hw, uint16_t buffer,
3188	uint32_t buffer_size)
3189	{
3190	uint16_t eeprom_ptrs[IXGBE_EEPROM_LAST_WORD0x41 + 1];
3191	uint16_t *local_buffer;
3192	int32_t status;
3193	uint16_t checksum = 0;
3194	uint16_t pointer, i, size;
3195
3196	DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550");;
3197
3198	hw->eeprom.ops.init_params(hw);
3199
3200	if (!buffer) {
3201	/* Read pointer area */
3202	status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
3203	IXGBE_EEPROM_LAST_WORD0x41 + 1,
3204	eeprom_ptrs);
3205	if (status) {
3206	DEBUGOUT("Failed to read EEPROM image\n");
3207	return status;
3208	}
3209	local_buffer = eeprom_ptrs;
3210	} else {
3211	if (buffer_size < IXGBE_EEPROM_LAST_WORD0x41)
3212	return IXGBE_ERR_PARAM-5;
3213	local_buffer = buffer;
3214	}
3215
3216	/*
3217	* For X550 hardware include 0x0-0x41 in the checksum, skip the
3218	* checksum word itself
3219	*/
3220	for (i = 0; i <= IXGBE_EEPROM_LAST_WORD0x41; i++)
3221	if (i != IXGBE_EEPROM_CHECKSUM0x3F)
3222	checksum += local_buffer[i];
3223
3224	/*
3225	* Include all data from pointers 0x3, 0x6-0xE. This excludes the
3226	* FW, PHY module, and PCIe Expansion/Option ROM pointers.
3227	*/
3228	for (i = IXGBE_PCIE_ANALOG_PTR_X5500x02; i < IXGBE_FW_PTR0x0F; i++) {
3229	if (i == IXGBE_PHY_PTR0x04 \|\| i == IXGBE_OPTION_ROM_PTR0x05)
3230	continue;
3231
3232	pointer = local_buffer[i];
3233
3234	/* Skip pointer section if the pointer is invalid. */
3235	if (pointer == 0xFFFF \|\| pointer == 0 \|\|
3236	pointer >= hw->eeprom.word_size)
3237	continue;
3238
3239	switch (i) {
3240	case IXGBE_PCIE_GENERAL_PTR0x06:
3241	size = IXGBE_IXGBE_PCIE_GENERAL_SIZE0x24;
3242	break;
3243	case IXGBE_PCIE_CONFIG0_PTR0x07:
3244	case IXGBE_PCIE_CONFIG1_PTR0x08:
3245	size = IXGBE_PCIE_CONFIG_SIZE0x08;
3246	break;
3247	default:
3248	size = 0;
3249	break;
3250	}
3251
3252	status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
3253	buffer, buffer_size);
3254	if (status)
3255	return status;
3256	}
3257
3258	checksum = (uint16_t)IXGBE_EEPROM_SUM0xBABA - checksum;
3259
3260	return (int32_t)checksum;
3261	}
3262
3263	/**
3264	* ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
3265	* @hw: pointer to hardware structure
3266	*
3267	* Returns a negative error code on error, or the 16-bit checksum
3268	**/
3269	int32_t ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
3270	{
3271	return ixgbe_calc_checksum_X550(hw, NULL((void *)0), 0);
3272	}
3273
3274	/**
3275	* ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
3276	* @hw: pointer to hardware structure
3277	* @checksum_val: calculated checksum
3278	*
3279	* Performs checksum calculation and validates the EEPROM checksum. If the
3280	* caller does not need checksum_val, the value can be NULL.
3281	**/
3282	int32_t ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw hw, uint16_t checksum_val)
3283	{
3284	int32_t status;
3285	uint16_t checksum;
3286	uint16_t read_checksum = 0;
3287
3288	DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550");;
3289
3290	/* Read the first word from the EEPROM. If this times out or fails, do
3291	* not continue or we could be in for a very long wait while every
3292	* EEPROM read fails
3293	*/
3294	status = hw->eeprom.ops.read(hw, 0, &checksum);
3295	if (status) {
3296	DEBUGOUT("EEPROM read failed\n");
3297	return status;
3298	}
3299
3300	status = hw->eeprom.ops.calc_checksum(hw);
3301	if (status < 0)
3302	return status;
3303
3304	checksum = (uint16_t)(status & 0xffff);
3305
3306	status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM0x3F,
3307	&read_checksum);
3308	if (status)
3309	return status;
3310
3311	/* Verify read checksum from EEPROM is the same as
3312	* calculated checksum
3313	*/
3314	if (read_checksum != checksum) {
3315	status = IXGBE_ERR_EEPROM_CHECKSUM-2;
3316	ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
3317	"Invalid EEPROM checksum");
3318	}
3319
3320	/* If the user cares, return the calculated checksum */
3321	if (checksum_val)
3322	*checksum_val = checksum;
3323
3324	return status;
3325	}
3326
3327	/**
3328	* ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
3329	* @hw: pointer to hardware structure
3330	*
3331	* After writing EEPROM to shadow RAM using EEWR register, software calculates
3332	* checksum and updates the EEPROM and instructs the hardware to update
3333	* the flash.
3334	**/
3335	int32_t ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
3336	{
3337	int32_t status;
3338	uint16_t checksum = 0;
3339
3340	DEBUGFUNC("ixgbe_update_eeprom_checksum_X550");;
3341
3342	/* Read the first word from the EEPROM. If this times out or fails, do
3343	* not continue or we could be in for a very long wait while every
3344	* EEPROM read fails
3345	*/
3346	status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
3347	if (status) {
3348	DEBUGOUT("EEPROM read failed\n");
3349	return status;
3350	}
3351
3352	status = ixgbe_calc_eeprom_checksum_X550(hw);
3353	if (status < 0)
3354	return status;
3355
3356	checksum = (uint16_t)(status & 0xffff);
3357
3358	status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM0x3F,
3359	checksum);
3360	if (status)
3361	return status;
3362
3363	status = ixgbe_update_flash_X550(hw);
3364
3365	return status;
3366	}
3367
3368	/**
3369	* ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
3370	* @hw: pointer to hardware structure
3371	*
3372	* Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
3373	**/
3374	int32_t ixgbe_update_flash_X550(struct ixgbe_hw *hw)
3375	{
3376	int32_t status = IXGBE_SUCCESS0;
3377	union ixgbe_hic_hdr2 buffer;
3378
3379	DEBUGFUNC("ixgbe_update_flash_X550");;
3380
3381	buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD0x36;
3382	buffer.req.buf_lenh = 0;
3383	buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN0;
3384	buffer.req.checksum = FW_DEFAULT_CHECKSUM0xFF;
3385
3386	status = ixgbe_host_interface_command(hw, (uint32_t *)&buffer,
3387	sizeof(buffer),
3388	IXGBE_HI_COMMAND_TIMEOUT500, FALSE0);
3389
3390	return status;
3391	}
3392
3393	/**
3394	* ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
3395	* @hw: pointer to hardware structure
3396	*
3397	* Determines physical layer capabilities of the current configuration.
3398	**/
3399	uint64_t ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
3400	{
3401	uint64_t physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN0;
3402	uint16_t ext_ability = 0;
3403
3404	DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em");;
3405
3406	hw->phy.ops.identify(hw);
3407
3408	switch (hw->phy.type) {
3409	case ixgbe_phy_x550em_kr:
3410	if (hw->mac.type == ixgbe_mac_X550EM_a) {
3411	if (hw->phy.nw_mng_if_sel &
3412	IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G(1u << 20)) {
3413	physical_layer =
3414	IXGBE_PHYSICAL_LAYER_2500BASE_KX0x10000;
3415	break;
3416	} else if (hw->device_id ==
3417	IXGBE_DEV_ID_X550EM_A_KR_L0x15C3) {
3418	physical_layer =
3419	IXGBE_PHYSICAL_LAYER_1000BASE_KX0x00200;
3420	break;
3421	}
3422	}
3423	/* fall through */
3424	case ixgbe_phy_x550em_xfi:
3425	physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR0x00800 \|
3426	IXGBE_PHYSICAL_LAYER_1000BASE_KX0x00200;
3427	break;
3428	case ixgbe_phy_x550em_kx4:
3429	physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX40x00080 \|
3430	IXGBE_PHYSICAL_LAYER_1000BASE_KX0x00200;
3431	break;
3432	case ixgbe_phy_x550em_ext_t:
3433	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY0xB,
3434	IXGBE_MDIO_PMA_PMD_DEV_TYPE0x1,
3435	&ext_ability);
3436	if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY0x0004)
3437	physical_layer \|= IXGBE_PHYSICAL_LAYER_10GBASE_T0x00001;
3438	if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY0x0020)
3439	physical_layer \|= IXGBE_PHYSICAL_LAYER_1000BASE_T0x00002;
3440	break;
3441	case ixgbe_phy_fw:
3442	if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_1GB_FULL0x0020)
3443	physical_layer \|= IXGBE_PHYSICAL_LAYER_1000BASE_T0x00002;
3444	if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_100_FULL0x0008)
3445	physical_layer \|= IXGBE_PHYSICAL_LAYER_100BASE_TX0x00004;
3446	if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_10_FULL0x0002)
3447	physical_layer \|= IXGBE_PHYSICAL_LAYER_10BASE_T0x08000;
3448	break;
3449	case ixgbe_phy_sgmii:
3450	physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX0x00200;
3451	break;
3452	case ixgbe_phy_ext_1g_t:
3453	physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T0x00002;
3454	break;
3455	default:
3456	break;
3457	}
3458
3459	if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
3460	physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
3461
3462	return physical_layer;
3463	}
3464
3465	/**
3466	* ixgbe_get_bus_info_x550em - Set PCI bus info
3467	* @hw: pointer to hardware structure
3468	*
3469	* Sets bus link width and speed to unknown because X550em is
3470	* not a PCI device.
3471	**/
3472	int32_t ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
3473	{
3474
3475	DEBUGFUNC("ixgbe_get_bus_info_x550em");;
3476
3477	hw->bus.width = ixgbe_bus_width_unknown;
3478	hw->bus.speed = ixgbe_bus_speed_unknown;
3479
3480	hw->mac.ops.set_lan_id(hw);
3481
3482	return IXGBE_SUCCESS0;
3483	}
3484
3485	/**
3486	* ixgbe_disable_rx_x550 - Disable RX unit
3487	* @hw: pointer to hardware structure
3488	*
3489	* Enables the Rx DMA unit for x550
3490	**/
3491	void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
3492	{
3493	uint32_t rxctrl, pfdtxgswc;
3494	int32_t status;
3495	struct ixgbe_hic_disable_rxen fw_cmd;
3496
3497	DEBUGFUNC("ixgbe_enable_rx_dma_x550");;
3498
3499	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x03000 )));
3500	if (rxctrl & IXGBE_RXCTRL_RXEN0x00000001) {
3501	pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x08220 )));
3502	if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN0x1) {
3503	pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN0x1;
3504	IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x08220 ), (pfdtxgswc)));
3505	hw->mac.set_lben = TRUE1;
3506	} else {
3507	hw->mac.set_lben = FALSE0;
3508	}
3509
3510	fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD0xDE;
3511	fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN0x1;
3512	fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM0xFF;
3513	fw_cmd.port_number = (uint8_t)hw->bus.lan_id;
3514
3515	status = ixgbe_host_interface_command(hw, (uint32_t *)&fw_cmd,
3516	sizeof(struct ixgbe_hic_disable_rxen),
3517	IXGBE_HI_COMMAND_TIMEOUT500, TRUE1);
3518
3519	/* If we fail - disable RX using register write */
3520	if (status) {
3521	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x03000 )));
3522	if (rxctrl & IXGBE_RXCTRL_RXEN0x00000001) {
3523	rxctrl &= ~IXGBE_RXCTRL_RXEN0x00000001;
3524	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x03000 ), (rxctrl)));
3525	}
3526	}
3527	}
3528	}
3529
3530	/**
3531	* ixgbe_enter_lplu_x550em - Transition to low power states
3532	* @hw: pointer to hardware structure
3533	*
3534	* Configures Low Power Link Up on transition to low power states
3535	* (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
3536	* X557 PHY immediately prior to entering LPLU.
3537	**/
3538	int32_t ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
3539	{
3540	uint16_t an_10g_cntl_reg, autoneg_reg, speed;
3541	int32_t status;
3542	ixgbe_link_speed lcd_speed;
3543	uint32_t save_autoneg;
3544	bool_Bool link_up;
3545
3546	/* SW LPLU not required on later HW revisions. */
3547	if ((hw->mac.type == ixgbe_mac_X550EM_x) &&
3548	(IXGBE_FUSES0_REV_MASK(3 << 6) &
3549	IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), ((0x11158 + ((0) * 4)))))))
3550	return IXGBE_SUCCESS0;
3551
3552	/* If blocked by MNG FW, then don't restart AN */
3553	if (ixgbe_check_reset_blocked(hw))
3554	return IXGBE_SUCCESS0;
3555
3556	status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
3557	if (status != IXGBE_SUCCESS0)
3558	return status;
3559
3560	status = hw->eeprom.ops.read(hw, NVM_INIT_CTRL_30x38, &hw->eeprom.ctrl_word_3);
3561	if (status != IXGBE_SUCCESS0)
3562	return status;
3563
3564	/* If link is down, LPLU disabled in NVM, WoL disabled, or manageability
3565	* disabled, then force link down by entering low power mode.
3566	*/
3567	if (!link_up \|\| !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU0x8) \|\|
3568	!(hw->wol_enabled \|\| ixgbe_mng_present(hw)))
3569	return ixgbe_set_copper_phy_power(hw, FALSE0);
3570
3571	/* Determine LCD */
3572	status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
3573
3574	if (status != IXGBE_SUCCESS0)
3575	return status;
3576
3577	/* If no valid LCD link speed, then force link down and exit. */
3578	if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN0)
3579	return ixgbe_set_copper_phy_power(hw, FALSE0);
3580
3581	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT0xC800,
3582	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
3583	&speed);
3584
3585	if (status != IXGBE_SUCCESS0)
3586	return status;
3587
3588	/* If no link now, speed is invalid so take link down */
3589	status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
3590	if (status != IXGBE_SUCCESS0)
3591	return ixgbe_set_copper_phy_power(hw, FALSE0);
3592
3593	/* clear everything but the speed bits */
3594	speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK0x6;
3595
3596	/* If current speed is already LCD, then exit. */
3597	if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB0x4) &&
3598	(lcd_speed == IXGBE_LINK_SPEED_1GB_FULL0x0020)) \|\|
3599	((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB0x6) &&
3600	(lcd_speed == IXGBE_LINK_SPEED_10GB_FULL0x0080)))
3601	return status;
3602
3603	/* Clear AN completed indication */
3604	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM0xCC00,
3605	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
3606	&autoneg_reg);
3607
3608	if (status != IXGBE_SUCCESS0)
3609	return status;
3610
3611	status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG0x20,
3612	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
3613	&an_10g_cntl_reg);
3614
3615	if (status != IXGBE_SUCCESS0)
3616	return status;
3617
3618	status = hw->phy.ops.read_reg(hw,
3619	IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG0xC400,
3620	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
3621	&autoneg_reg);
3622
3623	if (status != IXGBE_SUCCESS0)
3624	return status;
3625
3626	save_autoneg = hw->phy.autoneg_advertised;
3627
3628	/* Setup link at least common link speed */
3629	status = hw->mac.ops.setup_link(hw, lcd_speed, FALSE0);
3630
3631	/* restore autoneg from before setting lplu speed */
3632	hw->phy.autoneg_advertised = save_autoneg;
3633
3634	return status;
3635	}
3636
3637	/**
3638	* ixgbe_get_lcd_x550em - Determine lowest common denominator
3639	* @hw: pointer to hardware structure
3640	* @lcd_speed: pointer to lowest common link speed
3641	*
3642	* Determine lowest common link speed with link partner.
3643	**/
3644	int32_t ixgbe_get_lcd_t_x550em(struct ixgbe_hw hw, ixgbe_link_speed lcd_speed)
3645	{
3646	uint16_t an_lp_status;
3647	int32_t status;
3648	uint16_t word = hw->eeprom.ctrl_word_3;
3649
3650	*lcd_speed = IXGBE_LINK_SPEED_UNKNOWN0;
3651
3652	status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS0xE820,
3653	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
3654	&an_lp_status);
3655
3656	if (status != IXGBE_SUCCESS0)
3657	return status;
3658
3659	/* If link partner advertised 1G, return 1G */
3660	if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP0x8000) {
3661	*lcd_speed = IXGBE_LINK_SPEED_1GB_FULL0x0020;
3662	return status;
3663	}
3664
3665	/* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
3666	if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT10x100)) \|\|
3667	(word & NVM_INIT_CTRL_3_D10GMP_PORT00x40))
3668	return status;
3669
3670	/* Link partner not capable of lower speeds, return 10G */
3671	*lcd_speed = IXGBE_LINK_SPEED_10GB_FULL0x0080;
3672	return status;
3673	}
3674
3675	/**
3676	* ixgbe_setup_fc_X550em - Set up flow control
3677	* @hw: pointer to hardware structure
3678	*
3679	* Called at init time to set up flow control.
3680	**/
3681	int32_t ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
3682	{
3683	int32_t ret_val = IXGBE_SUCCESS0;
3684	uint32_t pause, asm_dir, reg_val;
3685
3686	DEBUGFUNC("ixgbe_setup_fc_X550em");;
3687
3688	/* Validate the requested mode */
3689	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
3690	ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
3691	"ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
3692	ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS-13;
3693	goto out;
3694	}
3695
3696	/* 10gig parts do not have a word in the EEPROM to determine the
3697	* default flow control setting, so we explicitly set it to full.
3698	*/
3699	if (hw->fc.requested_mode == ixgbe_fc_default)
3700	hw->fc.requested_mode = ixgbe_fc_full;
3701
3702	/* Determine PAUSE and ASM_DIR bits. */
3703	switch (hw->fc.requested_mode) {
3704	case ixgbe_fc_none:
3705	pause = 0;
3706	asm_dir = 0;
3707	break;
3708	case ixgbe_fc_tx_pause:
3709	pause = 0;
3710	asm_dir = 1;
3711	break;
3712	case ixgbe_fc_rx_pause:
3713	/* Rx Flow control is enabled and Tx Flow control is
3714	* disabled by software override. Since there really
3715	* isn't a way to advertise that we are capable of RX
3716	* Pause ONLY, we will advertise that we support both
3717	* symmetric and asymmetric Rx PAUSE, as such we fall
3718	* through to the fc_full statement. Later, we will
3719	* disable the adapter's ability to send PAUSE frames.
3720	*/
3721	case ixgbe_fc_full:
3722	pause = 1;
3723	asm_dir = 1;
3724	break;
3725	default:
3726	ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
3727	"Flow control param set incorrectly\n");
3728	ret_val = IXGBE_ERR_CONFIG-4;
3729	goto out;
3730	}
3731
3732	switch (hw->device_id) {
3733	case IXGBE_DEV_ID_X550EM_X_KR0x15AB:
3734	case IXGBE_DEV_ID_X550EM_A_KR0x15C2:
3735	case IXGBE_DEV_ID_X550EM_A_KR_L0x15C3:
3736	ret_val = hw->mac.ops.read_iosf_sb_reg(hw,
3737	IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x822C : 0x422C),
3738	IXGBE_SB_IOSF_TARGET_KR_PHY0, &reg_val);
3739	if (ret_val != IXGBE_SUCCESS0)
3740	goto out;
3741	reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE(1 << 28) \|
3742	IXGBE_KRM_AN_CNTL_1_ASM_PAUSE(1 << 29));
3743	if (pause)
3744	reg_val \|= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE(1 << 28);
3745	if (asm_dir)
3746	reg_val \|= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE(1 << 29);
3747	ret_val = hw->mac.ops.write_iosf_sb_reg(hw,
3748	IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x822C : 0x422C),
3749	IXGBE_SB_IOSF_TARGET_KR_PHY0, reg_val);
3750
3751	/* This device does not fully support AN. */
3752	hw->fc.disable_fc_autoneg = TRUE1;
3753	break;
3754	case IXGBE_DEV_ID_X550EM_X_XFI0x15B0:
3755	hw->fc.disable_fc_autoneg = TRUE1;
3756	break;
3757	default:
3758	break;
3759	}
3760
3761	out:
3762	return ret_val;
3763	}
3764
3765	/**
3766	* ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37
3767	* @hw: pointer to hardware structure
3768	*
3769	* Enable flow control according to IEEE clause 37.
3770	**/
3771	void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
3772	{
3773	uint32_t link_s1, lp_an_page_low, an_cntl_1;
3774	int32_t status = IXGBE_ERR_FC_NOT_NEGOTIATED-27;
3775	ixgbe_link_speed speed;
3776	bool_Bool link_up;
3777
3778	/* AN should have completed when the cable was plugged in.
3779	* Look for reasons to bail out. Bail out if:
3780	* - FC autoneg is disabled, or if
3781	* - link is not up.
3782	*/
3783	if (hw->fc.disable_fc_autoneg) {
3784	ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
3785	"Flow control autoneg is disabled");
3786	goto out;
3787	}
3788
3789	hw->mac.ops.check_link(hw, &speed, &link_up, FALSE0);
3790	if (!link_up) {
3791	ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down");
3792	goto out;
3793	}
3794
3795	/* Check at auto-negotiation has completed */
3796	status = hw->mac.ops.read_iosf_sb_reg(hw,
3797	IXGBE_KRM_LINK_S1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x8200 : 0x4200),
3798	IXGBE_SB_IOSF_TARGET_KR_PHY0, &link_s1);
3799
3800	if (status != IXGBE_SUCCESS0 \|\|
3801	(link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE(1 << 28)) == 0) {
3802	DEBUGOUT("Auto-Negotiation did not complete\n");
3803	status = IXGBE_ERR_FC_NOT_NEGOTIATED-27;
3804	goto out;
3805	}
3806
3807	/* Read the 10g AN autoc and LP ability registers and resolve
3808	* local flow control settings accordingly
3809	*/
3810	status = hw->mac.ops.read_iosf_sb_reg(hw,
3811	IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x822C : 0x422C),
3812	IXGBE_SB_IOSF_TARGET_KR_PHY0, &an_cntl_1);
3813
3814	if (status != IXGBE_SUCCESS0) {
3815	DEBUGOUT("Auto-Negotiation did not complete\n");
3816	goto out;
3817	}
3818
3819	status = hw->mac.ops.read_iosf_sb_reg(hw,
3820	IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id)((hw->bus.lan_id) ? 0x836C : 0x436C),
3821	IXGBE_SB_IOSF_TARGET_KR_PHY0, &lp_an_page_low);
3822
3823	if (status != IXGBE_SUCCESS0) {
3824	DEBUGOUT("Auto-Negotiation did not complete\n");
3825	goto out;
3826	}
3827
3828	status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low,
3829	IXGBE_KRM_AN_CNTL_1_SYM_PAUSE(1 << 28),
3830	IXGBE_KRM_AN_CNTL_1_ASM_PAUSE(1 << 29),
3831	IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE(1 << 10),
3832	IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE(1 << 11));
3833
3834	out:
3835	if (status == IXGBE_SUCCESS0) {
3836	hw->fc.fc_was_autonegged = TRUE1;
3837	} else {
3838	hw->fc.fc_was_autonegged = FALSE0;
3839	hw->fc.current_mode = hw->fc.requested_mode;
3840	}
3841	}
3842
3843	/**
3844	* ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
3845	* @hw: pointer to hardware structure
3846	*
3847	**/
3848	void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
3849	{
3850	hw->fc.fc_was_autonegged = FALSE0;
3851	hw->fc.current_mode = hw->fc.requested_mode;
3852	}
3853
3854	/**
3855	* ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
3856	* @hw: pointer to hardware structure
3857	*
3858	* Enable flow control according to IEEE clause 37.
3859	**/
3860	void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
3861	{
3862	int32_t status = IXGBE_ERR_FC_NOT_NEGOTIATED-27;
3863	uint32_t info[FW_PHY_ACT_DATA_COUNT4] = { 0 };
3864	ixgbe_link_speed speed;
3865	bool_Bool link_up;
3866
3867	/* AN should have completed when the cable was plugged in.
3868	* Look for reasons to bail out. Bail out if:
3869	* - FC autoneg is disabled, or if
3870	* - link is not up.
3871	*/
3872	if (hw->fc.disable_fc_autoneg) {
3873	ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
3874	"Flow control autoneg is disabled");
3875	goto out;
3876	}
3877
3878	hw->mac.ops.check_link(hw, &speed, &link_up, FALSE0);
3879	if (!link_up) {
3880	ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down");
3881	goto out;
3882	}
3883
3884	/* Check if auto-negotiation has completed */
3885	status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO3, &info);
3886	if (status != IXGBE_SUCCESS0 \|\|
3887	!(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE(1u << 24))) {
3888	DEBUGOUT("Auto-Negotiation did not complete\n");
3889	status = IXGBE_ERR_FC_NOT_NEGOTIATED-27;
3890	goto out;
3891	}
3892
3893	/* Negotiate the flow control */
3894	status = ixgbe_negotiate_fc(hw, info[0], info[0],
3895	FW_PHY_ACT_GET_LINK_INFO_FC_RX(1u << 21),
3896	FW_PHY_ACT_GET_LINK_INFO_FC_TX(1u << 20),
3897	FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX(1u << 29),
3898	FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX(1u << 28));
3899
3900	out:
3901	if (status == IXGBE_SUCCESS0) {
3902	hw->fc.fc_was_autonegged = TRUE1;
3903	} else {
3904	hw->fc.fc_was_autonegged = FALSE0;
3905	hw->fc.current_mode = hw->fc.requested_mode;
3906	}
3907	}
3908
3909	/**
3910	* ixgbe_setup_fc_backplane_x550em_a - Set up flow control
3911	* @hw: pointer to hardware structure
3912	*
3913	* Called at init time to set up flow control.
3914	**/
3915	int32_t ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
3916	{
3917	int32_t status = IXGBE_SUCCESS0;
3918	uint32_t an_cntl = 0;
3919
3920	DEBUGFUNC("ixgbe_setup_fc_backplane_x550em_a");;
3921
3922	/* Validate the requested mode */
3923	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
3924	ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
3925	"ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
3926	return IXGBE_ERR_INVALID_LINK_SETTINGS-13;
3927	}
3928
3929	if (hw->fc.requested_mode == ixgbe_fc_default)
3930	hw->fc.requested_mode = ixgbe_fc_full;
3931
3932	/* Set up the 1G and 10G flow control advertisement registers so the
3933	* HW will be able to do FC autoneg once the cable is plugged in. If
3934	* we link at 10G, the 1G advertisement is harmless and vice versa.
3935	*/
3936	status = hw->mac.ops.read_iosf_sb_reg(hw,
3937	IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x822C : 0x422C),
3938	IXGBE_SB_IOSF_TARGET_KR_PHY0, &an_cntl);
3939
3940	if (status != IXGBE_SUCCESS0) {
3941	DEBUGOUT("Auto-Negotiation did not complete\n");
3942	return status;
3943	}
3944
3945	/* The possible values of fc.requested_mode are:
3946	* 0: Flow control is completely disabled
3947	* 1: Rx flow control is enabled (we can receive pause frames,
3948	* but not send pause frames).
3949	* 2: Tx flow control is enabled (we can send pause frames but
3950	* we do not support receiving pause frames).
3951	* 3: Both Rx and Tx flow control (symmetric) are enabled.
3952	* other: Invalid.
3953	*/
3954	switch (hw->fc.requested_mode) {
3955	case ixgbe_fc_none:
3956	/* Flow control completely disabled by software override. */
3957	an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE(1 << 28) \|
3958	IXGBE_KRM_AN_CNTL_1_ASM_PAUSE(1 << 29));
3959	break;
3960	case ixgbe_fc_tx_pause:
3961	/* Tx Flow control is enabled, and Rx Flow control is
3962	* disabled by software override.
3963	*/
3964	an_cntl \|= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE(1 << 29);
3965	an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE(1 << 28);
3966	break;
3967	case ixgbe_fc_rx_pause:
3968	/* Rx Flow control is enabled and Tx Flow control is
3969	* disabled by software override. Since there really
3970	* isn't a way to advertise that we are capable of RX
3971	* Pause ONLY, we will advertise that we support both
3972	* symmetric and asymmetric Rx PAUSE, as such we fall
3973	* through to the fc_full statement. Later, we will
3974	* disable the adapter's ability to send PAUSE frames.
3975	*/
3976	case ixgbe_fc_full:
3977	/* Flow control (both Rx and Tx) is enabled by SW override. */
3978	an_cntl \|= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE(1 << 28) \|
3979	IXGBE_KRM_AN_CNTL_1_ASM_PAUSE(1 << 29);
3980	break;
3981	default:
3982	ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
3983	"Flow control param set incorrectly\n");
3984	return IXGBE_ERR_CONFIG-4;
3985	}
3986
3987	status = hw->mac.ops.write_iosf_sb_reg(hw,
3988	IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id)((hw->bus.lan_id) ? 0x822C : 0x422C),
3989	IXGBE_SB_IOSF_TARGET_KR_PHY0, an_cntl);
3990
3991	/* Restart auto-negotiation. */
3992	status = ixgbe_restart_an_internal_phy_x550em(hw);
3993
3994	return status;
3995	}
3996
3997	/**
3998	* ixgbe_set_mux - Set mux for port 1 access with CS4227
3999	* @hw: pointer to hardware structure
4000	* @state: set mux if 1, clear if 0
4001	*/
4002	void ixgbe_set_mux(struct ixgbe_hw *hw, uint8_t state)
4003	{
4004	uint32_t esdp;
4005
4006	if (!hw->bus.lan_id)
4007	return;
4008	esdp = IXGBE_READ_REG(hw, IXGBE_ESDP)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00020 )));
4009	if (state)
4010	esdp \|= IXGBE_ESDP_SDP10x00000002;
4011	else
4012	esdp &= ~IXGBE_ESDP_SDP10x00000002;
4013	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp)((((struct ixgbe_osdep )(hw)->back)->os_memt)->write_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00020 ), (esdp)));
4014	IXGBE_WRITE_FLUSH(hw)((((struct ixgbe_osdep )(hw)->back)->os_memt)->read_4 ((((struct ixgbe_osdep )(hw)->back)->os_memh), (0x00008 )));
4015	}
4016
4017	/**
4018	* ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
4019	* @hw: pointer to hardware structure
4020	* @mask: Mask to specify which semaphore to acquire
4021	*
4022	* Acquires the SWFW semaphore and sets the I2C MUX
4023	**/
4024	int32_t ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, uint32_t mask)
4025	{
4026	int32_t status;
4027
4028	DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em");;
4029
4030	status = ixgbe_acquire_swfw_sync_X540(hw, mask);
4031	if (status)
4032	return status;
4033
4034	if (mask & IXGBE_GSSR_I2C_MASK0x1800)
4035	ixgbe_set_mux(hw, 1);
4036
4037	return IXGBE_SUCCESS0;
4038	}
4039
4040	/**
4041	* ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
4042	* @hw: pointer to hardware structure
4043	* @mask: Mask to specify which semaphore to release
4044	*
4045	* Releases the SWFW semaphore and sets the I2C MUX
4046	**/
4047	void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, uint32_t mask)
4048	{
4049	DEBUGFUNC("ixgbe_release_swfw_sync_X550em");;
4050
4051	if (mask & IXGBE_GSSR_I2C_MASK0x1800)
4052	ixgbe_set_mux(hw, 0);
4053
4054	ixgbe_release_swfw_sync_X540(hw, mask);
4055	}
4056
4057	/**
4058	* ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore
4059	* @hw: pointer to hardware structure
4060	* @mask: Mask to specify which semaphore to acquire
4061	*
4062	* Acquires the SWFW semaphore and get the shared phy token as needed
4063	*/
4064	int32_t ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, uint32_t mask)
4065	{
4066	uint32_t hmask = mask & ~IXGBE_GSSR_TOKEN_SM0x40000000;
4067	int retries = FW_PHY_TOKEN_RETRIES((5 * 1000) / 5);
4068	int32_t status = IXGBE_SUCCESS0;
4069
4070	DEBUGFUNC("ixgbe_acquire_swfw_sync_X550a");;
4071
4072	while (--retries) {
4073	status = IXGBE_SUCCESS0;
4074	if (hmask)
4075	status = ixgbe_acquire_swfw_sync_X540(hw, hmask);
4076	if (status) {
4077	DEBUGOUT1("Could not acquire SWFW semaphore, Status = %d\n",
4078	status);
4079	return status;
4080	}
4081	if (!(mask & IXGBE_GSSR_TOKEN_SM0x40000000))
4082	return IXGBE_SUCCESS0;
4083
4084	status = ixgbe_get_phy_token(hw);
4085	if (status == IXGBE_ERR_TOKEN_RETRY-40)
4086	DEBUGOUT1("Could not acquire PHY token, Status = %d\n",
4087	status);
4088
4089	if (status == IXGBE_SUCCESS0)
4090	return IXGBE_SUCCESS0;
4091
4092	if (hmask)
4093	ixgbe_release_swfw_sync_X540(hw, hmask);
4094
4095	if (status != IXGBE_ERR_TOKEN_RETRY-40) {
4096	DEBUGOUT1("Unable to retry acquiring the PHY token, Status = %d\n",
4097	status);
4098	return status;
4099	}
4100	}
4101
4102	DEBUGOUT1("Semaphore acquisition retries failed!: PHY ID = 0x%08X\n",
4103	hw->phy.id);
4104	return status;
4105	}
4106
4107	/**
4108	* ixgbe_release_swfw_sync_X550a - Release SWFW semaphore
4109	* @hw: pointer to hardware structure
4110	* @mask: Mask to specify which semaphore to release
4111	*
4112	* Releases the SWFW semaphore and puts the shared phy token as needed
4113	*/
4114	void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, uint32_t mask)
4115	{
4116	uint32_t hmask = mask & ~IXGBE_GSSR_TOKEN_SM0x40000000;
4117
4118	DEBUGFUNC("ixgbe_release_swfw_sync_X550a");;
4119
4120	if (mask & IXGBE_GSSR_TOKEN_SM0x40000000)
4121	ixgbe_put_phy_token(hw);
4122
4123	if (hmask)
4124	ixgbe_release_swfw_sync_X540(hw, hmask);
4125	}
4126
4127	/**
4128	* ixgbe_read_phy_reg_x550a - Reads specified PHY register
4129	* @hw: pointer to hardware structure
4130	* @reg_addr: 32 bit address of PHY register to read
4131	* @device_type: 5 bit device type
4132	* @phy_data: Pointer to read data from PHY register
4133	*
4134	* Reads a value from a specified PHY register using the SWFW lock and PHY
4135	* Token. The PHY Token is needed since the MDIO is shared between to MAC
4136	* instances.
4137	**/
4138	int32_t ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
4139	uint32_t device_type, uint16_t *phy_data)
4140	{
4141	int32_t status;
4142	uint32_t mask = hw->phy.phy_semaphore_mask \| IXGBE_GSSR_TOKEN_SM0x40000000;
4143
4144	DEBUGFUNC("ixgbe_read_phy_reg_x550a");;
4145
4146	if (hw->mac.ops.acquire_swfw_sync(hw, mask))
4147	return IXGBE_ERR_SWFW_SYNC-16;
4148
4149	status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data);
4150
4151	hw->mac.ops.release_swfw_sync(hw, mask);
4152
4153	return status;
4154	}
4155
4156	/**
4157	* ixgbe_write_phy_reg_x550a - Writes specified PHY register
4158	* @hw: pointer to hardware structure
4159	* @reg_addr: 32 bit PHY register to write
4160	* @device_type: 5 bit device type
4161	* @phy_data: Data to write to the PHY register
4162	*
4163	* Writes a value to specified PHY register using the SWFW lock and PHY Token.
4164	* The PHY Token is needed since the MDIO is shared between to MAC instances.
4165	**/
4166	int32_t ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, uint32_t reg_addr,
4167	uint32_t device_type, uint16_t phy_data)
4168	{
4169	int32_t status;
4170	uint32_t mask = hw->phy.phy_semaphore_mask \| IXGBE_GSSR_TOKEN_SM0x40000000;
4171
4172	DEBUGFUNC("ixgbe_write_phy_reg_x550a");;
4173
4174	if (hw->mac.ops.acquire_swfw_sync(hw, mask) == IXGBE_SUCCESS0) {
4175	status = hw->phy.ops.write_reg_mdi(hw, reg_addr, device_type,
4176	phy_data);
4177	hw->mac.ops.release_swfw_sync(hw, mask);
4178	} else {
4179	status = IXGBE_ERR_SWFW_SYNC-16;
4180	}
4181
4182	return status;
4183	}
4184
4185	/**
4186	* ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
4187	* @hw: pointer to hardware structure
4188	*
4189	* Handle external Base T PHY interrupt. If high temperature
4190	* failure alarm then return error, else if link status change
4191	* then setup internal/external PHY link
4192	*
4193	* Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
4194	* failure alarm, else return PHY access status.
4195	*/
4196	int32_t ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
4197	{
4198	bool_Bool lsc;
4199	uint32_t status;
4200
4201	status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
4202
4203	if (status != IXGBE_SUCCESS0)
4204	return status;
4205
4206	if (lsc)
4207	return hw->phy.ops.setup_internal_link(hw);
4208
4209	return IXGBE_SUCCESS0;
4210	}
4211
4212	/**
4213	* ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
4214	* @hw: pointer to hardware structure
4215	* @speed: new link speed
4216	* @autoneg_wait_to_complete: TRUE when waiting for completion is needed
4217	*
4218	* Setup internal/external PHY link speed based on link speed, then set
4219	* external PHY auto advertised link speed.
4220	*
4221	* Returns error status for any failure
4222	**/
4223	int32_t ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
4224	ixgbe_link_speed speed,
4225	bool_Bool autoneg_wait_to_complete)
4226	{
4227	int32_t status;
4228	ixgbe_link_speed force_speed;
4229
4230	DEBUGFUNC("ixgbe_setup_mac_link_t_X550em");;
4231
4232	/* Setup internal/external PHY link speed to iXFI (10G), unless
4233	* only 1G is auto advertised then setup KX link.
4234	*/
4235	if (speed & IXGBE_LINK_SPEED_10GB_FULL0x0080)
4236	force_speed = IXGBE_LINK_SPEED_10GB_FULL0x0080;
4237	else
4238	force_speed = IXGBE_LINK_SPEED_1GB_FULL0x0020;
4239
4240	/* If X552 and internal link mode is XFI, then setup XFI internal link.
4241	*/
4242	if (hw->mac.type == ixgbe_mac_X550EM_x &&
4243	!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE(1 << 24))) {
4244	status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
4245
4246	if (status != IXGBE_SUCCESS0)
4247	return status;
4248	}
4249
4250	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
4251	}
4252
4253	/**
4254	* ixgbe_check_link_t_X550em - Determine link and speed status
4255	* @hw: pointer to hardware structure
4256	* @speed: pointer to link speed
4257	* @link_up: TRUE when link is up
4258	* @link_up_wait_to_complete: bool used to wait for link up or not
4259	*
4260	* Check that both the MAC and X557 external PHY have link.
4261	**/
4262	int32_t ixgbe_check_link_t_X550em(struct ixgbe_hw hw, ixgbe_link_speed speed,
4263	bool_Bool *link_up, bool_Bool link_up_wait_to_complete)
4264	{
4265	uint32_t status;
4266	uint16_t i, autoneg_status = 0;
4267
4268	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
4269	return IXGBE_ERR_CONFIG-4;
4270
4271	status = ixgbe_check_mac_link_generic(hw, speed, link_up,
4272	link_up_wait_to_complete);
4273
4274	/* If check link fails or MAC link is not up, then return */
4275	if (status != IXGBE_SUCCESS0 \|\| !(*link_up))
4276	return status;
4277
4278	/* MAC link is up, so check external PHY link.
4279	* X557 PHY. Link status is latching low, and can only be used to detect
4280	* link drop, and not the current status of the link without performing
4281	* back-to-back reads.
4282	*/
4283	for (i = 0; i < 2; i++) {
4284	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS0x1,
4285	IXGBE_MDIO_AUTO_NEG_DEV_TYPE0x7,
4286	&autoneg_status);
4287
4288	if (status != IXGBE_SUCCESS0)
4289	return status;
4290	}
4291
4292	/* If external PHY link is not up, then indicate link not up */
4293	if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS0x4))
4294	*link_up = FALSE0;
4295
4296	return IXGBE_SUCCESS0;
4297	}
4298
4299	/**
4300	* ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
4301	* @hw: pointer to hardware structure
4302	**/
4303	int32_t ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
4304	{
4305	int32_t status;
4306
4307	status = ixgbe_reset_phy_generic(hw);
4308
4309	if (status != IXGBE_SUCCESS0)
4310	return status;
4311
4312	/* Configure Link Status Alarm and Temperature Threshold interrupts */
4313	return ixgbe_enable_lasi_ext_t_x550em(hw);
4314	}
4315
4316	/**
4317	* ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
4318	* @hw: pointer to hardware structure
4319	* @led_idx: led number to turn on
4320	**/
4321	int32_t ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, uint32_t led_idx)
4322	{
4323	uint16_t phy_data;
4324
4325	DEBUGFUNC("ixgbe_led_on_t_X550em");;
4326
4327	if (led_idx >= IXGBE_X557_MAX_LED_INDEX3)
4328	return IXGBE_ERR_PARAM-5;
4329
4330	if (hw->phy.id == 0)
4331	ixgbe_identify_phy(hw);
4332
4333	/* To turn on the LED, set mode to ON. */
4334	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING0xC430 + led_idx,
4335	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E, &phy_data);
4336	phy_data \|= IXGBE_X557_LED_MANUAL_SET_MASK(1 << 8);
4337	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING0xC430 + led_idx,
4338	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E, phy_data);
4339
4340	/* Some designs have the LEDs wired to the MAC */
4341	return ixgbe_led_on_generic(hw, led_idx);
4342	}
4343
4344	/**
4345	* ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
4346	* @hw: pointer to hardware structure
4347	* @led_idx: led number to turn off
4348	**/
4349	int32_t ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, uint32_t led_idx)
4350	{
4351	uint16_t phy_data;
4352
4353	DEBUGFUNC("ixgbe_led_off_t_X550em");;
4354
4355	if (led_idx >= IXGBE_X557_MAX_LED_INDEX3)
4356	return IXGBE_ERR_PARAM-5;
4357
4358	if (hw->phy.id == 0)
4359	ixgbe_identify_phy(hw);
4360
4361	/* To turn on the LED, set mode to ON. */
4362	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING0xC430 + led_idx,
4363	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E, &phy_data);
4364	phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK(1 << 8);
4365	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING0xC430 + led_idx,
4366	IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE0x1E, phy_data);
4367
4368	/* Some designs have the LEDs wired to the MAC */
4369	return ixgbe_led_off_generic(hw, led_idx);
4370	}